Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered M-349547-510. This table explores the base group M349547; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“M349547” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFM 349547/510255.6 × 342.9 × mm | TIMKENM349547 / M349511255.6 × 342.9 × 57.15 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | TIMKEN |
| Designation | M 349547/510 | M349547 / M349511 |
| Product family | Tapered roller bearings | TS - Tapered Single |
| Detailed type | Single row tapered roller bearing | Tapered roller bearings |
| Series | — | M349500 |
| Bore diameterd | 255.6 mm | 255.6 mm |
| Outside diameterD | 342.9 mm | 342.9 mm |
| WidthB | — | 57.15 mm |
| Basic dynamic load ratingC | 698 kN | 628 kN |
| Basic static load ratingC0 | 1400 kN | 1270 kN |
| Fatigue load limitPu | 125 kN | — |
| Reference speednref | 1200 r/min | — |
| Limiting speednG | 1600 r/min | — |
| Mass≈m | 14.8 kg | 14.67 kg |
| Sealing | Without | — |
| Cage | Sheet metal | — |
| Lubricant | None | — |
| Calculation Factors | ||
| K Factor | — | 1.68 |
| Y1 Factor | — | 1.73 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 0.95 |
| E Factor | — | 0.35 |
| Cg Factor | — | 0.1433 |
| Dimensions | ||
| Width, total | 63.5 mm | — |
| Width, inner ring | 63.5 mm | — |
| Width, outer ring | 44.45 mm | — |
| Contact angle | 13.0 ° | — |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | max. 273 mm | — |
| Diameter of shaft abutmentd b | min. 269 mm | — |
| Diameter of housing abutmentD a | max. 327 mm | — |
| Diameter of housing abutmentD b | min. 331 mm | — |
| Minimum width of space required in housing on large side faceC a | min. 9 mm | — |
| Minimum width of space required in housing on small side faceC b | min. 12.5 mm | — |
| Radius of shaft filletr a | max. 1.5 mm | — |
| Radius of housing filletr b | max. 3.3 mm | — |
| Engineering — Calculation data | ||
| Limiting valuee | 0.35 | — |
| Calculation factorY | 1.7 | — |
| Calculation factorY 0 | 0.9 | — |
| Engineering — Dimensions | ||
| Bearing width, totalT | 57.15 mm | — |
| Shoulder diameter of inner ringd 1 | ≈ 296.8 mm | — |
| Width of inner ringB | 63.5 mm | — |
| Width of outer ringC | 44.45 mm | — |
| Chamfer dimension of inner ringr 1,2 | min. 1.5 mm | — |
| Chamfer dimension of outer ringr 3,4 | min. 3.3 mm | — |
| Distance side face to pressure pointa | 59.47 mm | — |
| Engineering — Engineering specifications | ||
| Dimension series | M 349500 | — |
| Logistics | ||
| Product net weight | 14.8 kg | — |
| eClass code | 23-05-09-10 | — |
| UNSPSC code | 31171516 | — |
| Manufacturer Identity | ||
| Material Number | — | 190011188190076348 |
| World Assembly Part Number | — | M349547 / M349511 |
| Inner Ring Part Number | — | M349547 |
| Outer Ring Part Number | — | M349511 |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| Product identity | ||
| Official product category | Tapered roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/single-row-tapered-roller-bearings | — |
| Structure group ID | BT1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Type Description | — | TS - Tapered Single |
| Number Of Rows | 1 | 1 |
| Tapered Bore | — | N |
| Properties | ||
| Bearing part | Complete bearing | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Arrangement of contact angle (double-row bearing) | Not applicable | — |
| Matched arrangement | No | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Unit system | Inch | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 54.6 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 18.2 kg CO 2 e | — |
| Technical Data | ||
| Overall Width | — | 64.500 mm |
| Radial Rating | — | 163,000 N |
| Axial Rating | — | 96,800 N |
| Dynamic Rating C1 | — | 628,000 N |
| Dynamic Rating C90 | — | 163,000 N |
| Dynamic Axial Rating Ca90 | — | 96,800 N |
| Dynamic Axial Rating Ca1 | — | 373,000 N |
| Static Radial Rating C0 | — | 1,270,000 N |
| Extended Dynamic Rating Ce | — | 0 N |
| Static Axial Rating C0A | — | 1,290,000 N |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.