Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“LL483449” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFLL 483449/418762 × 889 × mm | TIMKENLL483449 / LL483418762 × 889 × 69.85 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | TIMKEN |
| Designation | LL 483449/418 | LL483449 / LL483418 |
| Product family | Tapered roller bearings | TS - Tapered Single |
| Detailed type | Single row tapered roller bearing | Tapered roller bearings |
| Series | — | LL483400 |
| Bore diameterd | 762 mm | 762 mm |
| Outside diameterD | 889 mm | 889 mm |
| WidthB | — | 69.85 mm |
| Basic dynamic load ratingC | 1320 kN | 1570 kN |
| Basic static load ratingC0 | 3800 kN | 4270 kN |
| Fatigue load limitPu | 255 kN | — |
| Reference speednref | 380 r/min | — |
| Limiting speednG | 500 r/min | — |
| Mass≈m | 66.3 kg | 67.39 kg |
| Precision class | — | ABMA Class 4 |
| Sealing | Without | Open |
| Cage | Sheet metal | Steel cage |
| Lubricant | None | — |
| Calculation Factors | ||
| K Factor | — | 1.54 |
| Y1 Factor | — | 1.58 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.87 |
| E Factor | — | 0.38 |
| Cg Factor | — | 0.3070 |
| Dimensions | ||
| Width, total | 69.85 mm | — |
| Width, inner ring | 69.85 mm | — |
| Width, outer ring | 50.8 mm | — |
| Contact angle | 14.2 ° | — |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | max. 785 mm | — |
| Diameter of shaft abutmentd b | min. 779 mm | — |
| Diameter of housing abutmentD a | max. 872 mm | — |
| Diameter of housing abutmentD b | min. 858 mm | — |
| Minimum width of space required in housing on large side faceC a | min. 13 mm | — |
| Minimum width of space required in housing on small side faceC b | min. 19 mm | — |
| Radius of shaft filletr a | max. 3.1 mm | — |
| Radius of housing filletr b | max. 3.1 mm | — |
| Engineering — Calculation data | ||
| Limiting valuee | 0.37 | — |
| Calculation factorY | 1.6 | — |
| Calculation factorY 0 | 0.9 | — |
| Engineering — Dimensions | ||
| Bearing width, totalT | 69.85 mm | — |
| Shoulder diameter of inner ringd 1 | ≈ 819.15 mm | — |
| Width of inner ringB | 69.85 mm | — |
| Width of outer ringC | 50.8 mm | — |
| Chamfer dimension of inner ringr 1,2 | min. 3.3 mm | — |
| Chamfer dimension of outer ringr 3,4 | min. 3.3 mm | — |
| Distance side face to pressure pointa | 132 mm | — |
| Engineering — Engineering specifications | ||
| Dimension series | LL 483400 | — |
| Logistics | ||
| Product net weight | 66.3 kg | — |
| eClass code | 23-05-09-10 | — |
| Manufacturer Identity | ||
| Material Number | — | 000000000100133082 |
| World Assembly Part Number | — | LL483449_LL483418 |
| Inner Ring Part Number | — | LL483449 |
| Outer Ring Part Number | — | LL483418 |
| Drawing Number | — | E-26393 |
| Upc | — | 0053893789989 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:47.683 |
| Product identity | ||
| Official product category | Tapered roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/tapered-roller-bearings/single-row-tapered-roller-bearings | — |
| Structure group ID | BT1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Type Description | — | TS - Tapered Single |
| Construction | — | Single Row Tapered Roller Bearing Assembly | Imperial Series | 30.0000 in Bore | 35.0000 in OD | 2.7500 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class 4 |
| Number Of Rows | 1 | 1 |
| Tapered Bore | — | N |
| Properties | ||
| Bearing part | Complete bearing | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Arrangement of contact angle (double-row bearing) | Not applicable | — |
| Matched arrangement | No | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Unit system | Inch | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 245.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 81.6 kg CO 2 e | — |
| Technical Data | ||
| Overall Width | — | 82.350 mm |
| Radial Rating | — | 406,000 N |
| Axial Rating | — | 263,000 N |
| Dynamic Rating C1 | — | 1,570,000 N |
| Dynamic Rating C90 | — | 406,000 N |
| Dynamic Axial Rating Ca90 | — | 263,000 N |
| Dynamic Axial Rating Ca1 | — | 1,020,000 N |
| Static Radial Rating C0 | — | 4,270,000 N |
| Extended Dynamic Rating Ce | — | 0 N |
| Static Axial Rating C0A | — | 4,710,000 N |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.