Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered KRV-72-PPX. This table explores the base group KRV72; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“KRV72” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFKRV 72 PPCam follower (stud-type track roller) with integral sealing and relubrication feature | INAKRV72-PP24 × 72 × 80 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | KRV 72 PP | KRV72-PP |
| Product family | Cam followers (Stud-type track rollers) | — |
| Detailed type | Cam follower (stud-type track roller) with integral sealing and relubrication feature | Stud type track roller |
| Series | — | KRV72 |
| Bore diameterd | — | 24 mm |
| Outside diameterD | 72 mm | 72 mm |
| WidthB | — | 80 mm |
| Basic dynamic load ratingC | 33 kN | 36.5 kN |
| Basic static load ratingC0 | 78 kN | 86 kN |
| Fatigue load limitPu | 9.8 kN | 12.8 kN |
| Limiting speednG | 1600 r/min | 1100 r/min |
| Mass≈m | 1.23 kg | 0.999 kg |
| Internal clearance | Between C2 and CN | — |
| Sealing | Seal on both sides | — |
| Cage | Without | — |
| Bearing material | Bearing steel | — |
| Lubricant | Grease | — |
| Dimensions | ||
| Functional outside diameter | 72.0 mm | — |
| Stud diameter | 24.0 mm | — |
| Length | 80.1 mm | — |
| Width, outer ring | 29.0 mm | — |
| Engineering — Calculation data | ||
| Maximum dynamic radial loadsF r | max. 110 kN | — |
| Maximum static radial loadsF 0r | max. 160 kN | — |
| Engineering — Dimensions | ||
| Attachment diameterd | 24 mm | — |
| Total lengthB | 80.1 mm | — |
| Width outer ringC | 29 mm | — |
| Length shank on studB 1 | 49.5 mm | — |
| Distance lubrication hole to flange ringB 2 | 11 mm | — |
| Distance face outer ring to face side washerC 1 | 0.8 mm | — |
| Outside diameter flange ringd 1 | 41.5 mm | — |
| Thread studG | M24x1.5 | — |
| Length threadG 1 | 25 mm | — |
| Seat diameter for lubrication accessoriesM | 6 mm | — |
| Diameter of lubrication hole (shank)M 1 | 4 mm | — |
| Width across flatsSW | 14 mm | — |
| Engineering — Included products | ||
| Grease fitting | NIP B2x8 | — |
| Hexagonal nut | M 24x1.5 | — |
| Engineering — Mounting information | ||
| Recommended tightening torque | 220 N·m | — |
| Logistics | ||
| Product net weight | 1.23 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 399794 |
| Base Type | — | KRV72 |
| Gpsd Group | — | I03 |
| Product Line Id | — | 13 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Cam followers (Stud-type track rollers) | — |
| Official taxonomy path | /products/rolling-bearings/track-rollers/cam-followers | — |
| Structure group ID | BNT_004 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Stud type track rollers KRV..-PP-A, single row needle roller bearings with particularly thick-walled outer ring, full complement needle roller set and with a solid roller stud with fixing thread and a mounting aid, axial guidance of outer ring is provided by the plastic axial plain washers, contact flange and contact washer, three-stage sealing by plastic axial plain washer on both sides, without eccentric collar |
| Short Description | — | Stud type track roller |
| Properties | ||
| Rolling elements | Needle rollers | — |
| Number of rows | 1 | — |
| Outer ring profile | Crowned | — |
| Stud alignment | Centric | — |
| Number of flanges, outer ring | 2 | — |
| Feature for tightening | Hexagonal recess | — |
| Radial internal clearance | Between C2 and CN | — |
| Tolerance class | Other | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Sealing type | Contact | — |
| Relubrication feature | Centre of each stud end and radial hole in stud shank | — |
| Technical Data | ||
| Fit Diameter Of Roller Stud / Stud (D1) | — | 24 mm |
| Outside Diamater (D) | — | 72 mm |
| Total Width (B) | — | 80 mm |
| Basic Dynamic Load Rating, Radial (Cr W) | — | 36,500 N |
| Basic Static Load Rating, Radial (C0R W) | — | 86,000 N |
| Speed On Permanent Grease Lubrication (Nd G) | — | 1,100 1/min |
| Distance To Lubrication Hole (B3) | — | 11 mm |
| Bolt/Stud Length Effectively (B2) | — | 49.5 mm |
| Width Of Flats (W) | — | 14 mm |
| Diameter Lubrication Hole (D3) | — | 4 mm |
| Width, Outer Ring (C) | — | 29 mm |
| Protrusion Outer Ring To Thrust Washer (C1) | — | 0.8 mm |
| Thread Length (Ig) | — | 25 mm |
| Stop Diameter Of Thrust Washer (D2) | — | 44 mm |
| Tightening Torque Nut (Ma) | — | 220 Nm |
| Fatigue Load Limit, Radial (Cur W) | — | 12,800 N |
| Minimum Chamfer Dimension (Rmin) | — | 1.1 mm |
| Witdh Of Thrust Washer (B1) | — | 30.6 mm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.