Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered KM802048-907A1. This table explores the base group KM802048; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“KM802048” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGKM80204841.275 × × mm | TIMKENKM802048-907A141.275 × 82.55 × 26.543 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | KM802048 | KM802048-907A1 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | M802000 |
| Bore diameterd | 41.275 mm | 41.275 mm |
| Outside diameterD | — | 82.55 mm |
| WidthB | — | 26.543 mm |
| Basic dynamic load ratingC | 83 kN | 109 kN |
| Basic static load ratingC0 | 111 kN | 112 kN |
| Fatigue load limitPu | 14.1 kN | — |
| Reference speednref | 6000 r/min | — |
| Limiting speednG | 8700 r/min | — |
| Mass≈m | 0.49 kg | 0.62 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | ABMA Class 7 |
| Sealing | — | Open |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.07 |
| Y1 Factor | — | 1.10 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.60 |
| E Factor | — | 0.55 |
| Cg Factor | — | 0.0899 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.55 | — |
| Dynamic axial load factorY | 1.1 | — |
| Static axial load factorY0 | 0.6 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3.6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.142 in | — |
| Distance between the apexes of the pressure conesa | 22 mm | — |
| Distance between the apexes of the pressure conesa | 0.866 in | — |
| Guidance rib diameter of inner ringd1 | 64.15 mm | — |
| Guidance rib diameter of inner ringd1 | 2.526 in | — |
| Outer envelope circleEw | 82.028 mm | — |
| Outer envelope circleEw | 3.229 in | — |
| Contact angleα | 20 ° | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 25.654 mm | — |
| Width, inner ringB | 1.01 in | — |
| Basic dynamic load rating, radialCr | 83,000 N | — |
| Basic dynamic load rating, radialCr | 18,660.072 lbf | — |
| Basic static load rating, radialC0r | 111,000 N | — |
| Basic static load rating, radialC0r | 24,955.036 lbf | — |
| Fatigue load limit, radialCur | 14,100 N | — |
| Fatigue load limit, radialCur | 3,169.964 lbf | — |
| Thermal speed ratingnϑr | 6,000 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1850449 | — |
| Material Number | — | 000000000190037712 |
| Base Type | KM802048 | — |
| World Assembly Part Number | — | KM802048_KM802011 |
| Gpsd Group | F04 | — |
| Inner Ring Part Number | — | KM802048 |
| Product Line Id | 36 | — |
| Outer Ring Part Number | — | KM802011 |
| Drawing Number | — | A-54339 |
| Upc | — | 0053893784106 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:46.317 |
| SAP material number | 0382796730000 | — |
| Base product | 2305091003 | — |
| Mounting Manager ID | KM802048 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 50.6 mm | — |
| Maximum diameter of shaft shoulderda max | 1.992 in | — |
| Minimum diameter of shaft shoulderdb min | 57 mm | — |
| Minimum diameter of shaft shoulderdb min | 2.244 in | — |
| Minimum axial spaceCRa min | 3.9 mm | — |
| Minimum axial spaceCRa min | 0.154 in | — |
| Maximum axial spaceCRb max | 0.8 mm | — |
| Maximum axial spaceCRb max | 0.031 in | — |
| Maximum fillet radius of shaftra max | 3.6 mm | — |
| Maximum fillet radius of shaftra max | 0.142 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings without outer ring (Cone) K-Series, in inch sizes | Single Row Tapered Roller Bearing Assembly | Imperial Series | 1.6250 in Bore | 3.2500 in OD | 1.0450 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class 7 |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 41.275 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 83,000 N | — |
| Basic Static Load Rating, Radial (C0R) | 111,000 N | — |
| Overall Width | — | 29.954 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Radial Rating | — | 28,200 N |
| Limiting Speed (Ng) | 8,700 1/min | — |
| Axial Rating | — | 26,300 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Dynamic Rating C1 | — | 109,000 N |
| Reference Speed (Nϑr) | 6,000 1/min | — |
| Dynamic Rating C90 | — | 28,200 N |
| Contact Angle (Α) | 20 ° | — |
| Dynamic Axial Rating Ca90 | — | 26,300 N |
| Fatigue Load Limit, Radial (Cur) | 14,100 N | — |
| Dynamic Axial Rating Ca1 | — | 102,000 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.55 | — |
| Static Radial Rating C0 | — | 112,000 N |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 50.6 mm | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 57 mm | — |
| Static Axial Rating C0A | — | 179,000 N |
| Dynamic Axial Load Factor (Y) | 1.1 | — |
| Maximum Fillet Radius (Ra Max) | 3.6 mm | — |
| Maximum Axial Space (Crb Max) | 0.8 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3.6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 64.15 mm | — |
| Minimum Axial Space (Cra Min) | 3.9 mm | — |
| Width, Inner Ring (B) | 25.654 mm | — |
| Static Axial Load Factor (Y0) | 0.6 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 22 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.