Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered KH715334-XL-W215FB. This table explores the base group KH715334; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“KH715334” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGKH715334-H71531161.913 × 136.525 × 46.038 mm | TIMKENKH715334 / KH71531161.912 × 136.525 × 46.037 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | KH715334-H715311 | KH715334 / KH715311 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | H715300 |
| Bore diameterd | 61.913 mm | 61.912 mm |
| Outside diameterD | 136.525 mm | 136.525 mm |
| WidthB | 46.038 mm | 46.037 mm |
| Basic dynamic load ratingC | 230 kN | 319 kN |
| Basic static load ratingC0 | 370 kN | 405 kN |
| Fatigue load limitPu | 47.5 kN | — |
| Reference speednref | 3550 r/min | — |
| Limiting speednG | 4900 r/min | — |
| Mass≈m | 3.5 kg | 3.47 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.24 |
| Y1 Factor | — | 1.27 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 0.70 |
| E Factor | — | 0.47 |
| Cg Factor | — | 0.0934 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.47 | — |
| Dynamic axial load factorY | 1.27 | — |
| Static axial load factorY0 | 0.7 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3.6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.142 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 3.3 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.13 in | — |
| Distance between the apexes of the pressure conesa | 37 mm | — |
| Distance between the apexes of the pressure conesa | 1.457 in | — |
| Guidance rib diameter of inner ringd1 | 89.2 mm | — |
| Guidance rib diameter of inner ringd1 | 3.512 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 46.038 mm | — |
| Width, inner ringB | 1.813 in | — |
| Width, outer ringC | 36.512 mm | — |
| Width, outer ringC | 1.437 in | — |
| Width, totalT | 46.038 mm | — |
| Width, totalT | 1.813 in | — |
| Basic dynamic load rating, radialCr | 230,000 N | — |
| Basic dynamic load rating, radialCr | 51,708.633 lbf | — |
| Basic static load rating, radialC0r | 370,000 N | — |
| Basic static load rating, radialC0r | 83,183.453 lbf | — |
| Fatigue load limit, radialCur | 47,500 N | — |
| Fatigue load limit, radialCur | 10,678.957 lbf | — |
| Thermal speed ratingnϑr | 3,550 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 2267409 | — |
| Material Number | — | 100116361190000074 |
| Base Type | KH715334-H715311 | — |
| World Assembly Part Number | — | KH715334 / KH715311 |
| Product Line Id | 64 | — |
| Inner Ring Part Number | — | KH715334 |
| Outer Ring Part Number | — | KH715311 |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| Base product | 2305091001 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 81 mm | — |
| Maximum diameter of shaft shoulderda max | 3.189 in | — |
| Minimum diameter of shaft shoulderdb min | 87 mm | — |
| Minimum diameter of shaft shoulderdb min | 3.425 in | — |
| Minimum diameter of housing shoulderDa min | 118 mm | — |
| Minimum diameter of housing shoulderDa min | 4.646 in | — |
| Maximum diameter of housing shoulderDa max | 126 mm | — |
| Maximum diameter of housing shoulderDa max | 4.961 in | — |
| Minimum diameter of housing shoulderDb min | 132 mm | — |
| Minimum diameter of housing shoulderDb min | 5.197 in | — |
| Minimum axial spaceCa min | 4.5 mm | — |
| Minimum axial spaceCa min | 0.177 in | — |
| Minimum axial spaceCb min | 8 mm | — |
| Minimum axial spaceCb min | 0.315 in | — |
| Maximum fillet radius of shaftra max | 3.6 mm | — |
| Maximum fillet radius of shaftra max | 0.142 in | — |
| Maximum fillet radius of housingrb max | 3.3 mm | — |
| Maximum fillet radius of housingrb max | 0.13 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings K-Series, in inch sizes, separable | — |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 61.913 mm | — |
| Overall Width | — | 48.838 mm |
| Outside Diameter (D) | 136.525 mm | — |
| Radial Rating | — | 82,700 N |
| Width (B) | 46.038 mm | — |
| Axial Rating | — | 67,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | 230,000 N | — |
| Dynamic Rating C1 | — | 319,000 N |
| Basic Static Load Rating, Radial (C0R) | 370,000 N | — |
| Dynamic Rating C90 | — | 82,700 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 67,000 N |
| Limiting Speed (Ng) | 4,900 1/min | — |
| Dynamic Axial Rating Ca1 | — | 258,000 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Static Radial Rating C0 | — | 405,000 N |
| Reference Speed (Nϑr) | 3,550 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 3.3 mm | — |
| Static Axial Rating C0A | — | 558,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 3.3 mm | — |
| Minimum Diameter Of Housing Shoulder (Da Min) | 118 mm | — |
| Minimum Diameter Of Housing Shoulder (Db Min) | 132 mm | — |
| Width, Outer Ring (C) | 36.512 mm | — |
| Fatigue Load Limit, Radial (Cur) | 47,500 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.47 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 81 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 87 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 126 mm | — |
| Dynamic Axial Load Factor (Y) | 1.27 | — |
| Maximum Fillet Radius (Ra Max) | 3.6 mm | — |
| Minimum Axial Space (Cb Min) | 8 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3.6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 89.2 mm | — |
| Minimum Axial Space (Ca Min) | 4.5 mm | — |
| Width, Inner Ring (B) | 46.038 mm | — |
| Static Axial Load Factor (Y0) | 0.7 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 37 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.