Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered K395-3920. This table explores the base group K395; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“K395” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGK395-A-394-A66.675 × 110 × 22 mm | TIMKENK395-S / K394A66.675 × 110 × 21.999 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | K395-A-394-A | K395-S / K394A |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | K395 | 395 |
| Bore diameterd | 66.675 mm | 66.675 mm |
| Outside diameterD | 110 mm | 110 mm |
| WidthB | 22 mm | 21.999 mm |
| Basic dynamic load ratingC | 86 kN | 117 kN |
| Basic static load ratingC0 | 115 kN | 125 kN |
| Fatigue load limitPu | 13.8 kN | — |
| Reference speednref | 3950 r/min | — |
| Limiting speednG | 6600 r/min | — |
| Mass≈m | 0.855 kg | 0.78 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.45 |
| Y1 Factor | — | 1.49 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 0.82 |
| E Factor | — | 0.40 |
| Cg Factor | — | 0.0887 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.4 | — |
| Dynamic axial load factorY | 1.49 | — |
| Static axial load factorY0 | 0.82 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.8 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.031 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 1.3 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.051 in | — |
| Distance between the apexes of the pressure conesa | 21 mm | — |
| Distance between the apexes of the pressure conesa | 0.827 in | — |
| Guidance rib diameter of inner ringd1 | 87.9 mm | — |
| Guidance rib diameter of inner ringd1 | 3.461 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 21.996 mm | — |
| Width, inner ringB | 0.866 in | — |
| Width, outer ringC | 18.824 mm | — |
| Width, outer ringC | 0.741 in | — |
| Width, totalT | 22 mm | — |
| Width, totalT | 0.866 in | — |
| Basic dynamic load rating, radialCr | 86,000 N | — |
| Basic dynamic load rating, radialCr | 19,334.532 lbf | — |
| Basic static load rating, radialC0r | 115,000 N | — |
| Basic static load rating, radialC0r | 25,854.317 lbf | — |
| Fatigue load limit, radialCur | 13,800 N | — |
| Fatigue load limit, radialCur | 3,102.518 lbf | — |
| Thermal speed ratingnϑr | 3,950 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 2266621 | — |
| Material Number | — | 100027436100026452 |
| Base Type | K395 | — |
| World Assembly Part Number | — | K395-S / K394A |
| Product Line Id | 36 | — |
| Inner Ring Part Number | — | K395-S |
| Outer Ring Part Number | — | K394A |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| Base product | 2305091001 | — |
| Bearing X designation | K395-A-394-A | — |
| Mounting Manager ID | K395-A-394-A | — |
| Grease application ID | K395-A-394-A | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 73 mm | — |
| Maximum diameter of shaft shoulderda max | 2.874 in | — |
| Minimum diameter of shaft shoulderdb min | 73 mm | — |
| Minimum diameter of shaft shoulderdb min | 2.874 in | — |
| Minimum diameter of housing shoulderDa min | 101 mm | — |
| Minimum diameter of housing shoulderDa min | 3.976 in | — |
| Maximum diameter of housing shoulderDa max | 104 mm | — |
| Maximum diameter of housing shoulderDa max | 4.094 in | — |
| Minimum diameter of housing shoulderDb min | 105 mm | — |
| Minimum diameter of housing shoulderDb min | 4.134 in | — |
| Minimum axial spaceCa min | 4 mm | — |
| Minimum axial spaceCa min | 0.157 in | — |
| Minimum axial spaceCb min | 3 mm | — |
| Minimum axial spaceCb min | 0.118 in | — |
| Maximum fillet radius of shaftra max | 0.8 mm | — |
| Maximum fillet radius of shaftra max | 0.031 in | — |
| Maximum fillet radius of housingrb max | 1.3 mm | — |
| Maximum fillet radius of housingrb max | 0.051 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings K-Series, in inch sizes, separable | — |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 66.675 mm | — |
| Overall Width | — | 24.796 mm |
| Outside Diameter (D) | 110 mm | — |
| Radial Rating | — | 30,400 N |
| Width (B) | 22 mm | — |
| Axial Rating | — | 20,900 N |
| Basic Dynamic Load Rating, Radial (Cr) | 86,000 N | — |
| Dynamic Rating C1 | — | 117,000 N |
| Basic Static Load Rating, Radial (C0R) | 115,000 N | — |
| Dynamic Rating C90 | — | 30,400 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 20,900 N |
| Limiting Speed (Ng) | 6,600 1/min | — |
| Dynamic Axial Rating Ca1 | — | 80,700 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Static Radial Rating C0 | — | 125,000 N |
| Reference Speed (Nϑr) | 3,950 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 1.3 mm | — |
| Static Axial Rating C0A | — | 146,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 1.3 mm | — |
| Minimum Diameter Of Housing Shoulder (Da Min) | 101 mm | — |
| Minimum Diameter Of Housing Shoulder (Db Min) | 105 mm | — |
| Width, Outer Ring (C) | 18.824 mm | — |
| Fatigue Load Limit, Radial (Cur) | 13,800 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.4 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 73 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 73 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 104 mm | — |
| Dynamic Axial Load Factor (Y) | 1.49 | — |
| Maximum Fillet Radius (Ra Max) | 0.8 mm | — |
| Minimum Axial Space (Cb Min) | 3 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 0.8 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 87.9 mm | — |
| Minimum Axial Space (Ca Min) | 4 mm | — |
| Width, Inner Ring (B) | 21.996 mm | — |
| Static Axial Load Factor (Y0) | 0.82 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 21 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.