Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“HM516448” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | TIMKENHM516448 / HM51641082.55 × 133.35 × 39.687 mm | KOYOHM516448/1082.55 × 133.35 × 39.688 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | TIMKEN | KOYO |
| Designation | HM516448 / HM516410 | HM516448/10 |
| Product family | TS - Tapered Single | Single-row / Inch series |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | HM516400 | — |
| Bore diameterd | 82.55 mm | 82.55 mm |
| Outside diameterD | 133.35 mm | 133.35 mm |
| WidthB | 39.687 mm | 39.688 mm |
| Basic dynamic load ratingC | 259 kN | 222 kN |
| Basic static load ratingC0 | 353 kN | 306 kN |
| Fatigue load limitPu | — | 45.9 kN |
| Limiting speednG | — | 2800 r/min |
| Mass≈m | 2.15 kg | 2.093 kg |
| Calculation Factors | ||
| K Factor | 1.45 | — |
| Y1 Factor | 1.49 | — |
| Y2 Factor | -1.00 | — |
| Y0 Factor | 0.82 | — |
| E Factor | 0.40 | — |
| Cg Factor | 0.0955 | — |
| Classification | ||
| Official Category Path | — | Tapered roller bearings - Single-row - Inch series |
| Official Classification 1 | — | Tapered roller bearings / Single-row / Inch series |
| Manufacturer Identity | ||
| Material Number | 100074807100132981 | — |
| Official Class Key | — | 050-010-020 |
| World Assembly Part Number | HM516448 / HM516410 | — |
| Inner Ring Part Number | HM516448 | — |
| Outer Ring Part Number | HM516410 | — |
| Official Source System | TS_PREPAIR | — |
| Official Last Run | 2026-08-23T00:00:00 | — |
| Product Identity | ||
| Type Description | TS - Tapered Single | — |
| Number Of Rows | 1 | — |
| Tapered Bore | N | — |
| Technical Data | ||
| d | — | 133.350 mm |
| Overall Width | 42.988 mm | — |
| T | — | 39.688 mm |
| Radial Rating | 67,100 N | — |
| B | — | 39.688 mm |
| Axial Rating | 46,200 N | — |
| C | — | 32.545 mm |
| Dynamic Rating C1 | 259,000 N | — |
| R(Min.) | — | 6.7 mm |
| Dynamic Rating C90 | 67,100 N | — |
| R1(Min.) | — | 3.2 mm |
| Dynamic Axial Rating Ca90 | 46,200 N | — |
| Basic Load Ratings : Cr | — | 222 kN |
| Dynamic Axial Rating Ca1 | 178,000 N | — |
| Basic Load Ratings : C0R | — | 306 kN |
| Static Radial Rating C0 | 353,000 N | — |
| Fatigue Load Limit : Cu | — | 45.9 kN |
| Extended Dynamic Rating Ce | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | 2800 min-1 |
| Static Axial Rating C0A | 413,000 N | — |
| Limiting Speeds(Oil Lub.) | — | 3700 min-1 |
| Load Center Spread : A | — | 32.2 mm |
| Constant :E | — | 0.40 |
| Axial Load Factors : Y1 | — | 1.49 |
| Axial Load Factors : Y0 | — | 0.82 |
| Da | — | 118.0 mm |
| Db | — | 128.0 mm |
| Ra(Max.) | — | 6.7 mm |
| Rb(Max.) | — | 3.2 mm |
| Mass(Refer.) | — | 2.093 kg |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.