Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“HK5020” across 3 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFHK 5020Drawn cup needle roller bearing with open ends | INAHK502050 × 58 × 20 mm | KOYOHK5020Needle roller bearings |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | INA | KOYO |
| Designation | HK 5020 | HK5020 | HK5020 |
| Product family | Needle roller bearings | — | Drawn cup needle roller bearings / Metric series, caged |
| Detailed type | Drawn cup needle roller bearing with open ends | Drawn cup needle roller bearing open end | Needle roller bearings |
| Bore diameterd | — | 50 mm | — |
| Outside diameterD | 58 mm | 58 mm | 58 mm |
| WidthB | 20 mm | 20 mm | — |
| Basic dynamic load ratingC | 29.2 kN | 31 kN | 30.9 kN |
| Basic static load ratingC0 | 63 kN | 63 kN | 62.2 kN |
| Fatigue load limitPu | 7.8 kN | 8.4 kN | 8.8 kN |
| Reference speednref | 5000 r/min | 4050 r/min | — |
| Limiting speednG | 5600 r/min | 5300 r/min | 4100 r/min |
| Mass≈m | 0.072 kg | 0.0691 kg | 0.072 kg |
| Sealing | Without | — | — |
| Cage | Sheet steel | — | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 140 °C | — |
| Classification | |||
| Official Category Path | — | — | Needle roller bearings - Drawn cup needle roller bearings - Metric series, caged |
| Official Classification 1 | — | — | Needle roller bearings / Drawn cup needle roller bearings / Metric series, caged |
| Dimensions | |||
| Bore diameter of needle roller complement | 50.0 mm | — | — |
| Engineering — Associated products | |||
| Inner ring LR series | LR 45x50x20.5 | — | — |
| Radial shaft seal with a low cross-sectional height, single lip | G 50x58x4 | — | — |
| Radial shaft seal with a low cross-sectional height, double lip | SD 50x58x4 | — | — |
| Engineering — Dimensions | |||
| Diameter under rollersF w | 50 mm | — | — |
| Chamfer dimension drawn cup (outer ring)r | min. 0.8 mm | — | — |
| Logistics | |||
| Product net weight | 0.072 kg | — | — |
| eClass code | 23-05-09-03 | — | — |
| UNSPSC code | 31171512 | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 381455 | — |
| Official Class Key | — | — | 090-020-010 |
| Base Type | — | HK5020 | — |
| Old Designation | — | ["HK 5020"] | — |
| Gpsd Group | — | I01 | — |
| Product Line Id | — | 09 | — |
| X Life Marking | — | n.r. | — |
| Product identity | |||
| Official product category | Needle roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/drawn-cup-needle-roller-bearings | — | — |
| Structure group ID | BND_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Drawn cup needle roller bearing open end HK, single row, with cage | — |
| Short Description | — | Drawn cup needle roller bearing open end | — |
| Properties | |||
| Bearing part | Bearing without inner ring | — | — |
| Number of rows | 1 | — | — |
| Outer ring type | Drawn cup with open ends | — | — |
| Aligning feature | Without | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 0.27 kg CO 2 e | — | — |
| Technical Data | |||
| Fw | — | — | 50 mm |
| D | — | — | 58 mm |
| C | — | — | 20 mm |
| R(Min.) | — | — | 1 mm |
| Basic Load Ratings : Cr | — | — | 30.9 kN |
| Under Roller Diameter (Fw) | — | 50 mm | — |
| Basic Load Ratings : C0R | — | — | 62.2 kN |
| Outside Diamater (D) | — | 58 mm | — |
| Fatigue Load Limit : Cu | — | — | 8.80 kN |
| Width (C) | — | 20 mm | — |
| Limiting Speeds(Grease Lub.) | — | — | 4100 min-1 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 31,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 6300 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 63,000 N | — |
| Mounting Inner Ring | — | — | JR45x50x20 |
| Width, Outer Ring (C1) | — | 20 mm | — |
| Mass(Refer.) | — | — | 0.072 kg |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed For Grease Lubrication (Ng Grea) | — | 3,150 1/min | — |
| Operating Temperature Max. (Tmax) | — | 140 °C | — |
| Limiting Speed (Limiting Spe) | — | 5,300 1/min | — |
| Reference Speed (Nϑr) | — | 4,050 1/min | — |
| Minimum Chamfer Dimension (Rmin) | — | 0.8 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 8,400 N | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.