Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered HK2530-2RS. This table explores the base group HK2530; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“HK2530” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFHK 2530.2RSDrawn cup needle roller bearing with open ends and integral sealing | INAHK2530-2RS25 × 32 × mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | HK 2530.2RS | HK2530-2RS |
| Product family | Needle roller bearings | — |
| Detailed type | Drawn cup needle roller bearing with open ends and integral sealing | Drawn cup needle roller bearing open end |
| Series | — | HK2530 |
| Bore diameterd | — | 25 mm |
| Outside diameterD | 32 mm | 32 mm |
| WidthB | 30 mm | — |
| Basic dynamic load ratingC | 24.2 kN | 25.5 kN |
| Basic static load ratingC0 | 45 kN | 45 kN |
| Fatigue load limitPu | 5.5 kN | 6.3 kN |
| Limiting speednG | 6700 r/min | 6100 r/min |
| Mass≈m | 0.047 kg | 0.04862 kg |
| Sealing | Seal on both sides | — |
| Cage | Sheet steel | — |
| Bearing material | Bearing steel | — |
| Lubricant | Grease | — |
| Minimum operating temperatureTmin | — | -20 °C |
| Maximum operating temperatureTmax | — | 100 °C |
| Dimensions | ||
| Bore diameter of needle roller complement | 25.0 mm | — |
| Engineering — Associated products | ||
| Inner ring IR series | IR 20x25x30 | — |
| Engineering — Dimensions | ||
| Diameter under rollersF w | 25 mm | — |
| Chamfer dimension drawn cup (outer ring)r | min. 0.8 mm | — |
| Logistics | ||
| Product net weight | 0.047 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 381507 |
| Base Type | — | HK2530 |
| Gpsd Group | — | I01 |
| Product Line Id | — | 09 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Needle roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/drawn-cup-needle-roller-bearings | — |
| Structure group ID | BND_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Drawn cup needle roller bearings with open ends HK..-2RS, lip seals on both sides, to DIN 618 |
| Short Description | — | Drawn cup needle roller bearing open end |
| Properties | ||
| Bearing part | Bearing without inner ring | — |
| Number of rows | 1 | — |
| Outer ring type | Drawn cup with open ends | — |
| Aligning feature | Without | — |
| Number of flanges, outer ring | 2 | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Sealing type | Contact | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 0.17 kg CO 2 e | — |
| Technical Data | ||
| Under Roller Diameter (Fw) | — | 25 mm |
| Outside Diamater (D) | — | 32 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 25,500 N |
| Basic Static Load Rating, Radial (C0R) | — | 45,000 N |
| Width, Outer Ring (C1) | — | 30 mm |
| Operating Temperature Min. (Tmin) | — | -20 °C |
| Limiting Speed For Grease Lubrication (Ng Grea) | — | 6,100 1/min |
| Operating Temperature Max. (Tmax) | — | 100 °C |
| Limiting Speed (Limiting Spe) | — | 6,100 1/min |
| Minimum Chamfer Dimension (Rmin) | — | 0.8 mm |
| Fatigue Load Limit, Radial (Cur) | — | 6,300 N |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.