Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered HK-4516. This table explores the base group HK4516; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“HK4516” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFHK 4516Drawn cup needle roller bearing with open ends | KOYOHK4516Needle roller bearings |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | KOYO |
| Designation | HK 4516 | HK4516 |
| Product family | Needle roller bearings | Drawn cup needle roller bearings / Metric series, caged |
| Detailed type | Drawn cup needle roller bearing with open ends | Needle roller bearings |
| Outside diameterD | 52 mm | 52 mm |
| WidthB | 16 mm | — |
| Basic dynamic load ratingC | 20.5 kN | 19.8 kN |
| Basic static load ratingC0 | 43 kN | 38.5 kN |
| Fatigue load limitPu | 5.1 kN | 5.95 kN |
| Reference speednref | 5600 r/min | — |
| Limiting speednG | 6300 r/min | 4600 r/min |
| Mass≈m | 0.0422 kg | 0.048 kg |
| Sealing | Without | — |
| Cage | Sheet steel | — |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Classification | ||
| Official Category Path | — | Needle roller bearings - Drawn cup needle roller bearings - Metric series, caged |
| Official Classification 1 | — | Needle roller bearings / Drawn cup needle roller bearings / Metric series, caged |
| Dimensions | ||
| Bore diameter of needle roller complement | 45.0 mm | — |
| Engineering — Associated products | ||
| Inner ring IR series | IR 40x45x17 | — |
| Inner ring LR series | LR 40x45x16.5 | — |
| Radial shaft seal with a low cross-sectional height, single lip | G 45x52x4 | — |
| Radial shaft seal with a low cross-sectional height, double lip | SD 45x52x4 | — |
| Engineering — Dimensions | ||
| Diameter under rollersF w | 45 mm | — |
| Chamfer dimension drawn cup (outer ring)r | min. 0.8 mm | — |
| Logistics | ||
| Product net weight | 0.0422 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Official Class Key | — | 090-020-010 |
| Product identity | ||
| Official product category | Needle roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/drawn-cup-needle-roller-bearings | — |
| Structure group ID | BND_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Properties | ||
| Bearing part | Bearing without inner ring | — |
| Number of rows | 1 | — |
| Outer ring type | Drawn cup with open ends | — |
| Aligning feature | Without | — |
| Number of flanges, outer ring | 2 | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 0.16 kg CO 2 e | — |
| Technical Data | ||
| Fw | — | 45 mm |
| D | — | 52 mm |
| C | — | 16 mm |
| R(Min.) | — | 1 mm |
| Basic Load Ratings : Cr | — | 19.8 kN |
| Basic Load Ratings : C0R | — | 38.5 kN |
| Fatigue Load Limit : Cu | — | 5.95 kN |
| Limiting Speeds(Grease Lub.) | — | 4600 min-1 |
| Limiting Speeds(Oil Lub.) | — | 7000 min-1 |
| Mounting Inner Ring | — | JR40x45x17 |
| Mass(Refer.) | — | 0.048 kg |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.