Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered HC6216-C3. This table explores the base group HC6216; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“HC6216” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGHC6216-2Z-L038-C380 × 140 × 26 mm | INAHC6216-C380 × 140 × 26 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | INA |
| Designation | HC6216-2Z-L038-C3 | HC6216-C3 |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings |
| Series | HC6216 | HC6216 |
| Bore diameterd | 80 mm | 80 mm |
| Outside diameterD | 140 mm | 140 mm |
| WidthB | 26 mm | 26 mm |
| Basic dynamic load ratingC | 77 kN | 77 kN |
| Basic static load ratingC0 | 53 kN | 53 kN |
| Fatigue load limitPu | 2.65 kN | 2.65 kN |
| Reference speednref | 6200 r/min | 6200 r/min |
| Limiting speednG | 7400 r/min | 8800 r/min |
| Mass≈m | 1.33 kg | 1.293 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | — |
| Sealing | 2Z — Non-contact shield on both sides | — |
| Cage | JN — Steel sheet metal | — |
| Lubricant | L038 — Grease (L038/customer specific) | — |
| Minimum operating temperatureTmin | -20 °C | -30 °C |
| Maximum operating temperatureTmax | 150 °C | 150 °C |
| Calculation factors | ||
| Calculation factorf0 | 14.5 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Lifetimelubricationfreedomfrommaintenance | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Sealedonbothsides | Yes | — |
| Currentinsulated | Yes | — |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 2 mm | — |
| Minimum chamfer dimensionrmin | 0.079 in | — |
| Shoulder diameter outer ringD1 | 121.48 mm | — |
| Shoulder diameter outer ringD1 | 4.783 in | — |
| Caliber diameter outer ringD2 | 124.38 mm | — |
| Caliber diameter outer ringD2 | 4.897 in | — |
| Shoulder diameter inner ringd1 | 98.5 mm | — |
| Shoulder diameter inner ringd1 | 3.878 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 77,000 N | — |
| Basic dynamic load rating, radialCr | 17,311.151 lbf | — |
| Basic static load rating, radialC0r | 53,000 N | — |
| Basic static load rating, radialC0r | 11,915.468 lbf | — |
| Fatigue load limit, radialCur | 2,650 N | — |
| Fatigue load limit, radialCur | 595.773 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1296058 | 352498 |
| Base Type | HC6216 | HC6216 |
| Gpsd Group | S02 | S02 |
| Product Line Id | 14 | 14 |
| X Life Marking | — | n.r. |
| SAP material number | 0928091460030 | — |
| Base product | 2305080101 | — |
| Bearing X designation | HC6216-2Z-L038-C3 | — |
| Mounting Manager ID | HC6216-2Z-L038-C3 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 91 mm | — |
| Minimum diameter shaft shoulderda min | 3.583 in | — |
| Maximum diameter of housing shoulderDa max | 129 mm | — |
| Maximum diameter of housing shoulderDa max | 5.079 in | — |
| Maximum fillet radiusra max | 2 mm | — |
| Maximum fillet radiusra max | 0.079 in | — |
| Product characteristics | ||
| Material BearingHC | Hybrid bearing, rolling elements ceramic, bearing rings made of steel | — |
| Type of Seal2Z | Non-contact shield on both sides | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — |
| Radial internal clearanceC3 (Group 3) | Internal clearance larger than CN | — |
| Bore typeZ | Cylindrical | — |
| Product Identity | ||
| Construction | Deep groove ball bearing HC63..-2Z, Hybrid bearing, single row, shields, steel sheet metal cage | Deep groove ball bearing HC62, Hybrid bearing, single row, steel sheet metal cage |
| Short Description | Deep groove ball bearing | Deep groove ball bearing |
| Technical Data | ||
| Bore Diameter (D) | 80 mm | 80 mm |
| Outside Diameter (D) | 140 mm | 140 mm |
| Width (B) | 26 mm | 26 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 77,000 N | 77,000 N |
| Basic Static Load Rating, Radial (C0R) | 53,000 N | 53,000 N |
| Operating Temperature Min. (Tmin) | -20 °C | -30 °C |
| Limiting Speed (Ng) | 7,400 1/min | 8,800 1/min |
| Operating Temperature Max. (Tmax) | 150 °C | 150 °C |
| Reference Speed (Nϑr) | 6,200 1/min | 6,200 1/min |
| Calculation Factor (F0) | 14.5 | 14.5 |
| Fatigue Load Limit, Radial (Cur) | 2,650 N | 2,650 N |
| Minimum Diameter Shaft Shoulder (Da Min) | 91 mm | 91 mm |
| Shoulder Diameter Inner Ring (D1) | 98.5 mm | 98.84 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | 129 mm | 129 mm |
| Minimum Chamfer Dimension (Rmin) | 2 mm | 2 mm |
| Maximum Fillet Radius (Ra Max) | 2 mm | 2 mm |
| Shoulder Diameter Outer Ring (D1) | 121.48 mm | 121.48 mm |
| Caliber Diameter Outer Ring (D1) | 124.38 mm | 124.38 mm |
| Temperature range | ||
| Operating temperature min.Tmin | -20 °C | — |
| Operating temperature min.Tmin | -4 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.