Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“H204” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFH 20417 × × 24 mm | FAGH20420 × 32 × 24 mm | TIMKENH204KDD20 × 47 × 14 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | H 204 | H204 | H204KDD |
| Product family | Adapter sleeves | — | Radial Deep-Groove Ball |
| Detailed type | Adapter sleeve with km lock nut and mb lock washer, metric dimensions | Adapter sleeves | Deep groove ball bearings |
| Series | — | — | 200 |
| Bore diameterd | 17 mm | 20 mm | 20 mm |
| Outside diameterD | — | 32 mm | 47 mm |
| WidthB | 24 mm | 24 mm | 14 mm |
| Basic dynamic load ratingC | — | — | 12.8 kN |
| Basic static load ratingC0 | — | — | 6.58 kN |
| Mass≈m | 0.04 kg | 0.044 kg | 0.11 kg |
| Sealing | — | — | Shielded |
| Cage | — | — | Steel cage |
| Additional information | |||
| Locknut | — | KM4 | — |
| Fuse | — | MB4 | — |
| Taper | 1:12 | 1:12 | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 0.00 |
| Y2 Factor | — | — | 0.00 |
| Y0 Factor | — | — | 0.50 |
| E Factor | — | — | 0.00 |
| Cg Factor | — | — | 0.0260 |
| Dimensions | |||
| Thread designation | M20x1 | — | — |
| Bore diameter bearingd | — | 20 mm | — |
| Bore diameter bearingd | — | 0.787 in | — |
| Outside diameter nutd2 | — | 32 mm | — |
| Outside diameter nutd2 | — | 1.26 in | — |
| Width nut and lockB2 | — | 7 mm | — |
| Width nut and lockB2 | — | 0.276 in | — |
| Engineering — Dimensions | |||
| Outside diameter small taperd | 20 mm | — | — |
| Outside diameter lock nutd 3 | 32 mm | — | — |
| Width lock nutB | 6 mm | — | — |
| Width lock nut including lock washerB 4 | 7 mm | — | — |
| ThreadG | M20x1 | M20x1 | — |
| External taper | 1:12 | — | — |
| Engineering — Included products | |||
| Lock nut | KM 4 | — | — |
| Locking device | MB 4 | — | — |
| Logistics | |||
| Product net weight | 0.04 kg | — | — |
| eClass code | 23-11-07-05 | — | — |
| UNSPSC code | 31163218 | — | — |
| Main Dimensions & Performance Data | |||
| Sleeve lengthB1 | — | 24 mm | — |
| Sleeve lengthB1 | — | 0.945 in | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 408199 | — |
| Material Number | — | — | 000000000100022485 |
| Base Type | — | H204 | — |
| World Assembly Part Number | — | — | H204KDDC5 |
| Gpsd Group | — | F09 | — |
| Upc | — | — | 0087796174566 |
| Product Line Id | — | 79 | — |
| X Life Marking | — | n.r. | — |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:48.507 |
| SAP material number | — | 0167305260000 | — |
| Base product | — | 230592AA01 | — |
| Product characteristics | |||
| DesignStandard | — | Without | — |
| Product identity | |||
| Official product category | Adapter sleeves | — | — |
| Official taxonomy path | /products/rolling-bearings/accessories/adapter-sleeves | — | — |
| Structure group ID | ASA_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Type Description | — | — | Radial Deep-Groove Ball |
| Construction | — | Adapter sleeve H, accessory rolling bearing, complete, mechanical, FP | Single Row Deep Groove Ball Bearing | Imperial Series | 0.7874 in Bore | 1.8504 in OD | 0.5512 in Width | Double Shielded | Cylindrical Bore | Steel Cage | C2 Clearance | ISO P0 Tolerance |
| Number Of Rows | — | — | 1 |
| Short Description | — | Adapter sleeve | — |
| Tapered Bore | — | — | N |
| Properties | |||
| Holes for oil injection | Without | — | — |
| Technical Data | |||
| Overall Width | — | — | 0.000 mm |
| Radial Rating | — | — | 14,200 N |
| Outside Diameter Nut (D2) | — | 32 mm | — |
| Axial Rating | — | — | 0 N |
| Sleeve Length (B1) | — | 24 mm | — |
| Dynamic Rating C1 | — | — | 12,800 N |
| Width Nut And Lock (B2) | — | 7 mm | — |
| Dynamic Rating C90 | — | — | 0 N |
| Bore Diameter (D) | — | 20 mm | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Bore Diameter (D1) | — | 17 mm | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Static Radial Rating C0 | — | — | 6,580 N |
| Extended Dynamic Rating Ce | — | — | 14,200 N |
| Static Axial Rating C0A | — | — | 0 N |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.