Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“GE16” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFGE 16 ES16 × 30 × mm | INAGE16-LO16 × 28 × 16 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | GE 16 ES | GE16-LO |
| Product family | Radial spherical plain bearings | — |
| Detailed type | Radial spherical plain bearing, requiring maintenance, metric sizes | Spherical plain bearings |
| Bore diameterd | 16 mm | 16 mm |
| Outside diameterD | 30 mm | 28 mm |
| WidthB | — | 16 mm |
| Basic dynamic load ratingC | 21.2 kN | 22.9 kN |
| Basic static load ratingC0 | 106 kN | 88 kN |
| Mass≈m | 0.0424 kg | 0.034222 kg |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Minimum operating temperatureTmin | — | -60 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Dimensions | ||
| Width, inner ring | 14.0 mm | — |
| Width, outer ring | 10.0 mm | — |
| Logistics | ||
| Product net weight | 0.0424 kg | — |
| eClass code | 23-05-01-06 | — |
| UNSPSC code | 31171515 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 348195 |
| Base Type | — | GE16-LO |
| Gpsd Group | — | I05 |
| Product Line Id | — | 31 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Radial spherical plain bearings | — |
| Official taxonomy path | /products/plain-bearings/spherical-plain-bearings-rod-ends/radial | — |
| Structure group ID | BLR_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | High performance Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-1, dimension series W, cylindrical extensions on inner ring, open designHigh-performance: For highest load rating and lifetime demands |
| Short Description | — | Spherical plain bearing |
| Properties | ||
| Sliding contact surface combination | Steel/steel, standard | — |
| Material, inner ring | Bearing steel | — |
| Material, outer ring | Bearing steel | — |
| Maintenance | Relubrication required | — |
| Radial internal clearance | CN | — |
| Relubrication feature | With | — |
| Technical Data | ||
| Bore Diameter Bearing (D) | — | 16 mm |
| Outside Diameter Bearing (D) | — | 28 mm |
| Width Inner Ring (B) | — | 16 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 22,900 N |
| Basic Static Load Rating, Radial (C0R) | — | 88,000 N |
| Operating Temperature Min. (Tmin) | — | -60 °C |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Housing Connection Diameter (Da Min) | — | 23 mm |
| Width Inner Ring, Upper Tolerance (Bot) | — | 0 mm |
| Edge Spacing (R1Smin) | — | 0.3 mm |
| Outside Diameter, Upper Tolerance (Dot) | — | 0 mm |
| Bore Diameter Bearing, Upper Tolerance (Dot) | — | 0.018 mm |
| Radial Clearance, Maximum (Grmax) | — | 0.082 mm |
| Radial Clearance, Minimum (Grmin) | — | 0.04 mm |
| Width, Outer Ring (C) | — | 9 mm |
| Width Outer Ring, Lower Tolerance (Cot) | — | -0.24 mm |
| Edge Spacing (R2Smin) | — | 0.3 mm |
| Ball Diameter (Dk) | — | 23 mm |
| Width Outer Ring, Upper Tolerance (Cut) | — | 0 mm |
| Bore Diameter Bearing, Lower Tolerance (Dut) | — | 0 mm |
| Tilt Angle (Α) | — | 4 ° |
| Width Inner Ring, Lower Tolerance (But) | — | -0.18 mm |
| Connection Measure Inner Ring (Da Max) | — | 20 mm |
| Outside Diameter, Lower Tolerance (Dut) | — | -0.009 mm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.