Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“GE100” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFGE 100 ES100 × 150 × 70 mm | INAGE100-DO100 × 150 × 70 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | GE 100 ES | GE100-DO |
| Product family | Radial spherical plain bearings | — |
| Detailed type | Radial spherical plain bearing, requiring maintenance, metric sizes | Spherical plain bearings |
| Bore diameterd | 100 mm | 100 mm |
| Outside diameterD | 150 mm | 150 mm |
| WidthB | 70 mm | 70 mm |
| Basic dynamic load ratingC | 610 kN | 790 kN |
| Basic static load ratingC0 | 3050 kN | 3040 kN |
| Mass≈m | 4.25 kg | 4.02 kg |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Minimum operating temperatureTmin | — | -60 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Dimensions | ||
| Width, inner ring | 70.0 mm | — |
| Width, outer ring | 55.0 mm | — |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | max. 109.5 mm | — |
| Abutment diameter housingD a | max. 143.2 mm | — |
| Fillet radius shaftr a | max. 1 mm | — |
| Fillet radius housingr b | max. 1 mm | — |
| Engineering — Calculation data | ||
| Specific dynamic load factorK | 100 N/mm² | — |
| Specific static load factorK 0 | 500 N/mm² | — |
| Material constantK M | 330 | — |
| Engineering — Dimensions | ||
| Width outer ringC | 55 mm | — |
| Angle of tiltα | 7 ° | — |
| Raceway diameter inner ringd k | 130 mm | — |
| Width annular lubrication groove at outer ringb | 11.5 mm | — |
| Width annular lubrication groove at inner ringb 1 | 11.5 mm | — |
| Diameter lubrication hole (outer ring)M | 5 mm | — |
| Chamfer dimension borer 1 | min. 1 mm | — |
| Chamfer dimension outer ringr 2 | min. 1 mm | — |
| Engineering — Engineering specifications | ||
| Maintenance | Relubrication required | — |
| Sliding contact surface combination | Steel/steel, standard | — |
| Material, inner ring | Bearing steel | — |
| Material, outer ring | Bearing steel | — |
| Logistics | ||
| Product net weight | 4.25 kg | — |
| eClass code | 23-05-01-06 | — |
| UNSPSC code | 31171515 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 347824 |
| Base Type | — | GE100-DO |
| Gpsd Group | — | I05 |
| Product Line Id | — | 31 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Radial spherical plain bearings | — |
| Official taxonomy path | /products/plain-bearings/spherical-plain-bearings-rod-ends/radial | — |
| Structure group ID | BLR_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-1, dimension series E, open design High-performance: For highest load rating and lifetime demands |
| Short Description | — | Spherical plain bearing |
| Properties | ||
| Radial internal clearance | CN | — |
| Relubrication feature | With | — |
| Technical Data | ||
| Bore Diameter Bearing (D) | — | 100 mm |
| Outside Diameter Bearing (D) | — | 150 mm |
| Width Inner Ring (B) | — | 70 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 790,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 3,040,000 N |
| Operating Temperature Min. (Tmin) | — | -60 °C |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Housing Connection Diameter (Da Min) | — | 123 mm |
| Width Inner Ring, Upper Tolerance (Bot) | — | 0 mm |
| Edge Spacing (R1Smin) | — | 1 mm |
| Outside Diameter, Upper Tolerance (Dot) | — | 0 mm |
| Bore Diameter Bearing, Upper Tolerance (Dot) | — | 0 mm |
| Radial Clearance, Maximum (Grmax) | — | 0.165 mm |
| Radial Clearance, Minimum (Grmin) | — | 0.085 mm |
| Width, Outer Ring (C) | — | 55 mm |
| Width Outer Ring, Lower Tolerance (Cot) | — | -0.5 mm |
| Edge Spacing (R2Smin) | — | 1 mm |
| Ball Diameter (Dk) | — | 130 mm |
| Width Outer Ring, Upper Tolerance (Cut) | — | 0 mm |
| Bore Diameter Bearing, Lower Tolerance (Dut) | — | -0.02 mm |
| Tilt Angle (Α) | — | 7 ° |
| Width Inner Ring, Lower Tolerance (But) | — | -0.2 mm |
| Connection Measure Inner Ring (Da Max) | — | 109.5 mm |
| Outside Diameter, Lower Tolerance (Dut) | — | -0.018 mm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.