Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered GE-220-ES-2RS. This table explores the base group GE220; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“GE220” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFGE 220 ES-2RS220 × 320 × 135 mm | INAGE220-DO-2RS220 × 320 × 135 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | GE 220 ES-2RS | GE220-DO-2RS |
| Product family | Radial spherical plain bearings | — |
| Detailed type | Radial spherical plain bearing, requiring maintenance, sealed, metric sizes | Spherical plain bearings |
| Series | — | GE220-DO |
| Bore diameterd | 220 mm | 220 mm |
| Outside diameterD | 320 mm | 320 mm |
| WidthB | 135 mm | 135 mm |
| Basic dynamic load ratingC | 2320 kN | 3040 kN |
| Basic static load ratingC0 | 11600 kN | 11700 kN |
| Mass≈m | 34 kg | 35.5 kg |
| Internal clearance | CN | — |
| Sealing | Seal on both sides | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 130 °C |
| Dimensions | ||
| Width, inner ring | 135.0 mm | — |
| Width, outer ring | 100.0 mm | — |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | max. 239.5 mm | — |
| Abutment diameter housingD a | max. 309.5 mm | — |
| Fillet radius shaftr a | max. 1 mm | — |
| Fillet radius housingr b | max. 1 mm | — |
| Engineering — Calculation data | ||
| Specific dynamic load factorK | 100 N/mm² | — |
| Specific static load factorK 0 | 500 N/mm² | — |
| Material constantK M | 330 | — |
| Engineering — Dimensions | ||
| Width outer ringC | 100 mm | — |
| Angle of tiltα | 8 ° | — |
| Raceway diameter inner ringd k | 275 mm | — |
| Width annular lubrication groove at outer ringb | 16 mm | — |
| Width annular lubrication groove at inner ringb 1 | 16 mm | — |
| Diameter lubrication hole (outer ring)M | 7 mm | — |
| Chamfer dimension borer 1 | min. 1.1 mm | — |
| Chamfer dimension outer ringr 2 | min. 1.1 mm | — |
| Engineering — Engineering specifications | ||
| Maintenance | Relubrication required | — |
| Sliding contact surface combination | Steel/steel, standard | — |
| Material, inner ring | Bearing steel | — |
| Material, outer ring | Bearing steel | — |
| Sealing type | Double-lip | — |
| Logistics | ||
| Product net weight | 34.0 kg | — |
| eClass code | 23-05-01-06 | — |
| UNSPSC code | 31171515 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 347975 |
| Base Type | — | GE220-DO |
| Gpsd Group | — | I05 |
| Product Line Id | — | 31 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Radial spherical plain bearings | — |
| Official taxonomy path | /products/plain-bearings/spherical-plain-bearings-rod-ends/radial | — |
| Structure group ID | BLR_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | High performance radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-1, dimension series E, sealedHigh-performance: For highest load rating and lifetime demands |
| Short Description | — | Spherical plain bearing |
| Properties | ||
| Radial internal clearance | CN | — |
| Relubrication feature | With | — |
| Technical Data | ||
| Bore Diameter Bearing (D) | — | 220 mm |
| Outside Diameter Bearing (D) | — | 320 mm |
| Width Inner Ring (B) | — | 135 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 3,040,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 11,700,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Operating Temperature Max. (Tmax) | — | 130 °C |
| Housing Connection Diameter (Da Min) | — | 267 mm |
| Width Inner Ring, Upper Tolerance (Bot) | — | 0 mm |
| Edge Spacing (R1Smin) | — | 1.1 mm |
| Outside Diameter, Upper Tolerance (Dot) | — | 0 mm |
| Bore Diameter Bearing, Upper Tolerance (Dot) | — | 0 mm |
| Radial Clearance, Maximum (Grmax) | — | 0.192 mm |
| Radial Clearance, Minimum (Grmin) | — | 0.1 mm |
| Width, Outer Ring (C) | — | 100 mm |
| Width Outer Ring, Lower Tolerance (Cot) | — | -0.8 mm |
| Edge Spacing (R2Smin) | — | 1.1 mm |
| Ball Diameter (Dk) | — | 275 mm |
| Width Outer Ring, Upper Tolerance (Cut) | — | 0 mm |
| Bore Diameter Bearing, Lower Tolerance (Dut) | — | -0.03 mm |
| Tilt Angle (Α) | — | 8 ° |
| Width Inner Ring, Lower Tolerance (But) | — | -0.3 mm |
| Connection Measure Inner Ring (Da Max) | — | 239.5 mm |
| Outside Diameter, Lower Tolerance (Dut) | — | -0.04 mm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.