Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered GE-16-ES. This table explores the base group GE16; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“GE16” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKFGE 16 ES16 × 30 × mm | INAGE16-LO16 × 28 × 16 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | GE 16 ES | GE16-LO |
| Product family | Radial spherical plain bearings | — |
| Detailed type | Radial spherical plain bearing, requiring maintenance, metric sizes | Spherical plain bearings |
| Bore diameterd | 16 mm | 16 mm |
| Outside diameterD | 30 mm | 28 mm |
| WidthB | — | 16 mm |
| Basic dynamic load ratingC | 21.2 kN | 22.9 kN |
| Basic static load ratingC0 | 106 kN | 88 kN |
| Mass≈m | 0.0424 kg | 0.034222 kg |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Minimum operating temperatureTmin | — | -60 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Dimensions | ||
| Width, inner ring | 14.0 mm | — |
| Width, outer ring | 10.0 mm | — |
| Logistics | ||
| Product net weight | 0.0424 kg | — |
| eClass code | 23-05-01-06 | — |
| UNSPSC code | 31171515 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 348195 |
| Base Type | — | GE16-LO |
| Gpsd Group | — | I05 |
| Product Line Id | — | 31 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Radial spherical plain bearings | — |
| Official taxonomy path | /products/plain-bearings/spherical-plain-bearings-rod-ends/radial | — |
| Structure group ID | BLR_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | High performance Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-1, dimension series W, cylindrical extensions on inner ring, open designHigh-performance: For highest load rating and lifetime demands |
| Short Description | — | Spherical plain bearing |
| Properties | ||
| Sliding contact surface combination | Steel/steel, standard | — |
| Material, inner ring | Bearing steel | — |
| Material, outer ring | Bearing steel | — |
| Maintenance | Relubrication required | — |
| Radial internal clearance | CN | — |
| Relubrication feature | With | — |
| Technical Data | ||
| Bore Diameter Bearing (D) | — | 16 mm |
| Outside Diameter Bearing (D) | — | 28 mm |
| Width Inner Ring (B) | — | 16 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 22,900 N |
| Basic Static Load Rating, Radial (C0R) | — | 88,000 N |
| Operating Temperature Min. (Tmin) | — | -60 °C |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Housing Connection Diameter (Da Min) | — | 23 mm |
| Width Inner Ring, Upper Tolerance (Bot) | — | 0 mm |
| Edge Spacing (R1Smin) | — | 0.3 mm |
| Outside Diameter, Upper Tolerance (Dot) | — | 0 mm |
| Bore Diameter Bearing, Upper Tolerance (Dot) | — | 0.018 mm |
| Radial Clearance, Maximum (Grmax) | — | 0.082 mm |
| Radial Clearance, Minimum (Grmin) | — | 0.04 mm |
| Width, Outer Ring (C) | — | 9 mm |
| Width Outer Ring, Lower Tolerance (Cot) | — | -0.24 mm |
| Edge Spacing (R2Smin) | — | 0.3 mm |
| Ball Diameter (Dk) | — | 23 mm |
| Width Outer Ring, Upper Tolerance (Cut) | — | 0 mm |
| Bore Diameter Bearing, Lower Tolerance (Dut) | — | 0 mm |
| Tilt Angle (Α) | — | 4 ° |
| Width Inner Ring, Lower Tolerance (But) | — | -0.18 mm |
| Connection Measure Inner Ring (Da Max) | — | 20 mm |
| Outside Diameter, Lower Tolerance (Dut) | — | -0.009 mm |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.