Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered F607VV. This table explores the base group F607; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“F607” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGF607-2Z-HLC7 × 19 × 6 mm | NSKF6077 × 19 × 6 mm | KOYOF6077 × 19 × 6 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | F607-2Z-HLC | F607 | F607 |
| Product family | — | Single row deep groove ball bearings | Extra-small, miniature ball bearings / Flanged type / Open |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | F607 | — | — |
| Bore diameterd | 7 mm | 7 mm | 7 mm |
| Outside diameterD | 19 mm | 19 mm | 19 mm |
| WidthB | 6 mm | 6 mm | 6 mm |
| Basic dynamic load ratingC | 2.34 kN | 2.57 kN | 2.95 kN |
| Basic static load ratingC0 | 0.889 kN | 0.885 kN | 0.89 kN |
| Fatigue load limitPu | 0.0305 kN | — | 0.04 kN |
| Reference speednref | 37000 r/min | — | — |
| Limiting speednG | 45500 r/min | — | 40000 r/min |
| Mass≈m | 0.00937 kg | 0.00866 kg | 0.008 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Sealing | 2Z — Non-contact shield on both sides | Open | Open |
| Cage | JN — Steel sheet metal | — | — |
| Lubricant | Lubricating grease | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — |
| Boundary dimensions | |||
| Body outside diameterD | — | 19 mm | — |
| Bearing width (open)B | — | 6 mm | — |
| Minimum bearing chamferr min. | — | 0.3 mm | — |
| Calculation factors | |||
| Calculation factorf0 | 12.1 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Axial load capacity in both directions | Yes | — | — |
| Lifetimelubricationfreedomfrommaintenance | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Sealedonbothsides | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Deep groove ball bearings - Extra-small, miniature ball bearings - Flanged type - Open |
| Official Classification 1 | — | — | Deep groove ball bearings / Extra-small, miniature ball bearings / Flanged type / Open |
| Construction | |||
| Catalogue closure construction | — | Open | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 0.3 mm | — | — |
| Minimum chamfer dimensionrmin | 0.012 in | — | — |
| Shoulder diameter outer ringD1 | 15.02 mm | — | — |
| Shoulder diameter outer ringD1 | 0.591 in | — | — |
| Caliber diameter outer ringD2 | 16.5 mm | — | — |
| Caliber diameter outer ringD2 | 0.65 in | — | — |
| Shoulder diameter inner ringd1 | 10.12 mm | — | — |
| Shoulder diameter inner ringd1 | 0.398 in | — | — |
| Caliber diameter inner ringd2 | 9 mm | — | — |
| Caliber diameter inner ringd2 | 0.354 in | — | — |
| Width flangeBf | 1.5 mm | — | — |
| Width flangeBf | 0.059 in | — | — |
| Outer diameter flangeDf | 22 mm | — | — |
| Outer diameter flangeDf | 0.866 in | — | — |
| Flange dimensions | |||
| Flange outside diameterD1 | — | 22 mm | — |
| Flange widthC1 | — | 1.5 mm | — |
| Load ratings | |||
| Basic dynamic radial load ratingCr | — | 2570 N | — |
| Basic static radial load ratingC0r | — | 885 N | — |
| Lubrication-qualified speed | |||
| Limiting speed with grease | — | 36000 r/min | — |
| Limiting speed with oil (open) | — | 43000 r/min | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 2,340 N | — | — |
| Basic dynamic load rating, radialCr | 526.079 lbf | — | — |
| Basic static load rating, radialC0r | 889 N | — | — |
| Basic static load rating, radialC0r | 199.865 lbf | — | — |
| Fatigue load limit, radialCur | 30.5 N | — | — |
| Fatigue load limit, radialCur | 6.857 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 357084 | — | — |
| Official Class Key | — | — | 010-020-020 |
| Base Type | F607 | — | — |
| Gpsd Group | S02 | — | — |
| Product Line Id | 14 | — | — |
| SAP material number | 0555013380000 | — | — |
| Base product | 2305080103 | — | — |
| Mounting dimensions | |||
| Minimum shaft shoulder diameter (open)da min. | — | 9 mm | — |
| Maximum adjacent fillet radiusra max. | — | 0.3 mm | — |
| Product characteristics | |||
| Design, bearing outer ringF | Flange | — | — |
| Type of Seal2Z | Non-contact shield on both sides | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationSN | Rings dimensional stabilized up to 120° | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Product Identity | |||
| Construction | Deep groove ball bearing F60..-2Z, single row, with flange, shields, steel sheet metal cage | — | — |
| Short Description | Deep groove ball bearing | — | — |
| Reference mass | |||
| Approximate catalogue mass (open) | — | 8.66 g | — |
| Technical Data | |||
| d | — | — | 19 mm |
| B | — | — | 6 mm |
| Bore Diameter (D) | 7 mm | — | — |
| R(Min.) | — | — | 0.3 mm |
| Outside Diameter (D) | 19 mm | — | — |
| Basic Load Ratings : Cr | — | — | 2.95 kN |
| Width (B) | 6 mm | — | — |
| Basic Load Ratings : C0R | — | — | 0.89 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 2,340 N | — | — |
| Fatigue Load Limit : Cu | — | — | 0.04 kN |
| Basic Static Load Rating, Radial (C0R) | 889 N | — | — |
| Factor : F0 | — | — | 12.1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 40000 min-1 |
| Limiting Speed (Ng) | 45,500 1/min | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 47000 min-1 |
| Operating Temperature Max. (Tmax) | 120 °C | — | — |
| Dimensions Of Flange D1 | — | — | 22 mm |
| Reference Speed (Nϑr) | 37,000 1/min | — | — |
| Dimensions Of Flange C1 | — | — | 1.5 mm |
| Calculation Factor (F0) | 12.1 | — | — |
| Da(Min.) | — | — | 9 mm |
| Width Flange (Bf) | 1.5 mm | — | — |
| Ra(Max.) | — | — | 0.3 mm |
| Outer Diameter Flange (Df) | 22 mm | — | — |
| Mass(Refer.) | — | — | 8.7 g |
| Fatigue Load Limit, Radial (Cur) | 30.5 N | — | — |
| Shoulder Diameter Inner Ring (D1) | 10.12 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 0.3 mm | — | — |
| Caliber Diameter Inner Ring (D1) | 9 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | 15.02 mm | — | — |
| Caliber Diameter Outer Ring (D1) | 16.5 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 120 °C | — | — |
| Operating temperature max.Tmax | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.