Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“C3176” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFC 3176 KMB/C3380 × 620 × 194 mm | FAGC3176-XL-K-M-T52BW-C3380 × 620 × 194 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | C 3176 KMB/C3 | C3176-XL-K-M-T52BW-C3 |
| Product family | CARB toroidal roller bearings | — |
| Detailed type | Carb toroidal roller bearing with tapered bore (1:12) | Toroidal roller bearing |
| Series | — | C3176 |
| Bore diameterd | 380 mm | 380 mm |
| Outside diameterD | 620 mm | 620 mm |
| WidthB | 194 mm | 194 mm |
| Basic dynamic load ratingC | 4400 kN | 4950 kN |
| Basic static load ratingC0 | 7200 kN | 8200 kN |
| Fatigue load limitPu | 520 kN | 720 kN |
| Reference speednref | 750 r/min | 455 r/min |
| Limiting speednG | 1000 r/min | 990 r/min |
| Mass≈m | 236 kg | 243 kg |
| Internal clearance | C3 | — |
| Sealing | Without | — |
| Cage | Machined brass | M — Solid brass cage, ball guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Calculation factors | ||
| Operating clearance factor kδkδ | — | 0.544 |
| Tilting factor kφkφ | — | 20.41 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Unsealed design | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 5 mm |
| Minimum chamfer dimensionrmin | — | 0.197 in |
| Shoulder diameter of IRd2 | — | 448.4 mm |
| Shoulder diameter of IRd2 | — | 17.654 in |
| Shoulder diameter outer ringD1 | — | 548.6 mm |
| Shoulder diameter outer ringD1 | — | 21.598 in |
| Axial displacementS1 | — | 25.4 mm |
| Axial displacementS1 | — | 1 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | max. 445 mm | — |
| Diameter of housing abutmentD a | min. 526 mm | — |
| Abutment diameter housingD a | max. 600 mm | — |
| Minimum width of space required in housingC a | min. 7.3 mm | — |
| Radius of filletr a | max. 4 mm | — |
| Engineering — Calculation data | ||
| SKF performance class | SKF Explorer | — |
| Misalignment factork 1 | 0 | — |
| Internal clearance factork 2 | 0.11 | — |
| Engineering — Dimensions | ||
| Shoulder diameter of inner ringd 2 | ≈ 446 mm | — |
| Shoulder or recess diameter of outer ringD 1 | ≈ 551 mm | — |
| Permissible axial displacements 1 | max. 25.4 mm | — |
| Chamfer dimensionr 1,2 | min. 5 mm | — |
| Engineering — Engineering specifications | ||
| Bore type | Tapered 1:12 | — |
| Logistics | ||
| Product net weight | 236.0 kg | — |
| eClass code | 23-05-09-13 | — |
| UNSPSC code | 31171505 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 4,950,000 N |
| Basic dynamic load rating, radialCr | — | 1,112,859.712 lbf |
| Basic static load rating, radialC0r | — | 8,200,000 N |
| Basic static load rating, radialC0r | — | 1,843,525.18 lbf |
| Fatigue load limit, radialCur | — | 720,000 N |
| Fatigue load limit, radialCur | — | 161,870.504 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 2249554 |
| Base Type | — | C3176 |
| Gpsd Group | — | F03 |
| Product Line Id | — | 78 |
| X Life Marking | — | XL |
| SAP material number | — | 0847980680030 |
| Base product | — | 2305091390 |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 400 mm |
| Minimum diameter shaft shoulderda min | — | 15.748 in |
| Maximum diameter shaft shoulderda max | — | 474 mm |
| Maximum diameter shaft shoulderda max | — | 18.661 in |
| Minimum diameter of housing shoulderDa min | — | 523 mm |
| Minimum diameter of housing shoulderDa min | — | 20.591 in |
| Maximum diameter of housing shoulderDa max | — | 600 mm |
| Maximum diameter of housing shoulderDa max | — | 23.622 in |
| Maximum fillet radiusra max | — | 4 mm |
| Maximum fillet radiusra max | — | 0.157 in |
| Minimum depth of free space CaCa | — | 1.26 mm |
| Minimum depth of free space CaCa | — | 0.05 in |
| Product characteristics | ||
| Bore typeZ | — | Cylindrical |
| Product identity | ||
| Official product category | CARB toroidal roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/carb-toroidal-roller-bearings | — |
| Structure group ID | BSC_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Toroidal roller bearing C31..-XL-K-M |
| Short Description | — | Toroidal roller bearing |
| Properties | ||
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Radial internal clearance | C3 | — |
| Tolerance class | Normal | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 873.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 290.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 380 mm |
| Outside Diameter (D) | — | 620 mm |
| Width (B) | — | 194 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 4,950,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 8,200,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 990 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 455 1/min |
| Minimum Diameter Of Housing Shoulder (Da Min) | — | 523 mm |
| Axial Displacement (S1) | — | 25.4 mm |
| Minimum Depth Of Free Space Ca (Ca) | — | 1.26 mm |
| Operating Clearance Factor Kδ (Kδ) | — | 0.544 |
| Shoulder Diameter Of Ir (D2) | — | 448.4 mm |
| Tilting Factor Kφ (Kφ) | — | 20.41 |
| Fatigue Load Limit, Radial (Cur) | — | 720,000 N |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 474 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 400 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 600 mm |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm |
| Maximum Fillet Radius (Ra Max) | — | 4 mm |
| Shoulder Diameter Outer Ring (D1) | — | 548.6 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.