Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“BK2016” across 3 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFBK 2016Drawn cup needle roller bearing with a closed end | INABK2016-AS120 × 26 × 16 mm | KOYOBK2016Needle roller bearings |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | INA | KOYO |
| Designation | BK 2016 | BK2016-AS1 | BK2016 |
| Product family | Needle roller bearings | — | Drawn cup needle roller bearings / Metric series, caged |
| Detailed type | Drawn cup needle roller bearing with a closed end | Drawn cup needle roller bearing closed end | Needle roller bearings |
| Series | — | BK2016 | — |
| Bore diameterd | — | 20 mm | — |
| Outside diameterD | 26 mm | 26 mm | 26 mm |
| WidthB | 16 mm | 16 mm | — |
| Basic dynamic load ratingC | 12.3 kN | 12.7 kN | 12.4 kN |
| Basic static load ratingC0 | 20.4 kN | 20.1 kN | 18.9 kN |
| Fatigue load limitPu | 2.36 kN | 2.55 kN | 2.85 kN |
| Reference speednref | 12000 r/min | 9300 r/min | — |
| Limiting speednG | 14000 r/min | 12700 r/min | 11000 r/min |
| Mass≈m | 0.022 kg | 0.0223 kg | 0.024 kg |
| Sealing | Without | — | — |
| Cage | Sheet steel | — | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 140 °C | — |
| Classification | |||
| Official Category Path | — | — | Needle roller bearings - Drawn cup needle roller bearings - Metric series, caged |
| Official Classification 1 | — | — | Needle roller bearings / Drawn cup needle roller bearings / Metric series, caged |
| Dimensions | |||
| Bore diameter of needle roller complement | 20.0 mm | — | — |
| Engineering — Associated products | |||
| Inner ring IR series | IR 17x20x16.5 | — | — |
| Inner ring LR series | LR 17x20x16.5 | — | — |
| Radial shaft seal with a low cross-sectional height, single lip | G 20x26x4 | — | — |
| Radial shaft seal with a low cross-sectional height, double lip | SD 20x26x4 | — | — |
| Engineering — Dimensions | |||
| Diameter under rollersF w | 20 mm | — | — |
| Depth of the drawn cup BKC 1 | min. 13.3 mm | — | — |
| Chamfer dimension drawn cup (outer ring)r | min. 0.8 mm | — | — |
| Logistics | |||
| Product net weight | 0.022 kg | — | — |
| eClass code | 23-05-09-03 | — | — |
| UNSPSC code | 31171512 | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 382346 | — |
| Official Class Key | — | — | 090-020-010 |
| Base Type | — | BK2016 | — |
| Gpsd Group | — | I01 | — |
| Product Line Id | — | 09 | — |
| Product identity | |||
| Official product category | Needle roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/drawn-cup-needle-roller-bearings | — | — |
| Structure group ID | BND_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Drawn cup needle roller bearing closed end BK..-AS1, single row, with cage | — |
| Short Description | — | Drawn cup needle roller bearing closed end | — |
| Properties | |||
| Bearing part | Bearing without inner ring | — | — |
| Number of rows | 1 | — | — |
| Outer ring type | Drawn cup with one closed end | — | — |
| Aligning feature | Without | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 0.08 kg CO 2 e | — | — |
| Technical Data | |||
| Fw | — | — | 20 mm |
| D | — | — | 26 mm |
| C | — | — | 16 mm |
| Under Roller Diameter (Fw) | — | 20 mm | — |
| C3(Min.) | — | — | 13.3 mm |
| Outside Diamater (D) | — | 26 mm | — |
| R(Min.) | — | — | 1 mm |
| Width, Outer Ring (C) | — | 16 mm | — |
| Basic Load Ratings : Cr | — | — | 12.40 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 12,700 N | — |
| Basic Load Ratings : C0R | — | — | 18.90 kN |
| Basic Static Load Rating, Radial (C0R) | — | 20,100 N | — |
| Fatigue Load Limit : Cu | — | — | 2.85 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speeds(Grease Lub.) | — | — | 11000 min-1 |
| Operating Temperature Max. (Tmax) | — | 140 °C | — |
| Limiting Speeds(Oil Lub.) | — | — | 16000 min-1 |
| Limiting Speed (Limiting Spe) | — | 12,700 1/min | — |
| Mounting Inner Ring | — | — | JR17x20x16,5 |
| Reference Speed (Nϑr) | — | 9,300 1/min | — |
| Mass(Refer.) | — | — | 0.024 kg |
| Minimum Width To Base Of Drawn Cup With Closed End (Ct Min) | — | 13.3 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 0.8 mm | — |
| Limiting Speed For Grease Lubrication (Ng Grea) | — | 7,600 1/min | — |
| Fatigue Load Limit, Radial (Cur) | — | 2,550 N | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.