Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered BK-0808. This table explores the base group BK0808; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“BK0808” across 3 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFBK 0808Drawn cup needle roller bearing with a closed end | INABK08088 × 12 × 8 mm | KOYOBK0808Needle roller bearings |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | INA | KOYO |
| Designation | BK 0808 | BK0808 | BK0808 |
| Product family | Needle roller bearings | — | Drawn cup needle roller bearings / Metric series, caged |
| Detailed type | Drawn cup needle roller bearing with a closed end | Drawn cup needle roller bearing closed end | Needle roller bearings |
| Bore diameterd | — | 8 mm | — |
| Outside diameterD | 12 mm | 12 mm | 12 mm |
| WidthB | 8 mm | 8 mm | — |
| Basic dynamic load ratingC | 2.7 kN | 2.75 kN | 2.9 kN |
| Basic static load ratingC0 | 2.75 kN | 2.6 kN | 2.73 kN |
| Fatigue load limitPu | 0.285 kN | 0.3 kN | 0.4 kN |
| Reference speednref | 19000 r/min | 23800 r/min | — |
| Limiting speednG | 22000 r/min | 29500 r/min | 20000 r/min |
| Mass≈m | 0.003 kg | 0.00281 kg | 0.003 kg |
| Sealing | Without | — | — |
| Cage | Sheet steel | — | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 140 °C | — |
| Classification | |||
| Official Category Path | — | — | Needle roller bearings - Drawn cup needle roller bearings - Metric series, caged |
| Official Classification 1 | — | — | Needle roller bearings / Drawn cup needle roller bearings / Metric series, caged |
| Dimensions | |||
| Bore diameter of needle roller complement | 8.0 mm | — | — |
| Engineering — Associated products | |||
| Radial shaft seal with a low cross-sectional height, single lip | G 8x12x3 | — | — |
| Engineering — Dimensions | |||
| Diameter under rollersF w | 8 mm | — | — |
| Depth of the drawn cup BKC 1 | min. 6.4 mm | — | — |
| Chamfer dimension drawn cup (outer ring)r | min. 0.4 mm | — | — |
| Logistics | |||
| Product net weight | 0.003 kg | — | — |
| eClass code | 23-05-09-03 | — | — |
| UNSPSC code | 31171512 | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 382255 | — |
| Official Class Key | — | — | 090-020-010 |
| Base Type | — | BK0808 | — |
| Gpsd Group | — | I01 | — |
| Product Line Id | — | 09 | — |
| X Life Marking | — | n.r. | — |
| Product identity | |||
| Official product category | Needle roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/drawn-cup-needle-roller-bearings | — | — |
| Structure group ID | BND_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Drawn cup needle roller bearings with closed end BK, to DIN 618/ISO 3245 | — |
| Short Description | — | Drawn cup needle roller bearing closed end | — |
| Properties | |||
| Bearing part | Bearing without inner ring | — | — |
| Number of rows | 1 | — | — |
| Outer ring type | Drawn cup with one closed end | — | — |
| Aligning feature | Without | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 0.01 kg CO 2 e | — | — |
| Technical Data | |||
| Fw | — | — | 8 mm |
| D | — | — | 12 mm |
| C | — | — | 8 mm |
| C3(Min.) | — | — | 6.40 mm |
| Under Roller Diameter (Fw) | — | 8 mm | — |
| R(Min.) | — | — | 0.40 mm |
| Outside Diamater (D) | — | 12 mm | — |
| Basic Load Ratings : Cr | — | — | 2.90 kN |
| Width, Outer Ring (C) | — | 8 mm | — |
| Basic Load Ratings : C0R | — | — | 2.73 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 2,750 N | — |
| Fatigue Load Limit : Cu | — | — | 0.400 kN |
| Basic Static Load Rating, Radial (C0R) | — | 2,600 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 20000 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speeds(Oil Lub.) | — | — | 31000 min-1 |
| Operating Temperature Max. (Tmax) | — | 140 °C | — |
| Mass(Refer.) | — | — | 0.003 kg |
| Limiting Speed (Limiting Spe) | — | 29,500 1/min | — |
| Reference Speed (Nϑr) | — | 23,800 1/min | — |
| Minimum Width To Base Of Drawn Cup With Closed End (Ct Min) | — | 6.4 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 0.4 mm | — |
| Limiting Speed For Grease Lubrication (Ng Grea) | — | 17,700 1/min | — |
| Fatigue Load Limit, Radial (Cur) | — | 300 N | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.