Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered AXK-1730. This table explores the base group AXK1730; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“AXK1730” across 3 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFAXK 173017 × 30 × mm | INAAXK1730-A/0-1017 × 30 × 2 mm | KOYOAXK1730TNNeedle roller bearings |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | INA | KOYO |
| Designation | AXK 1730 | AXK1730-A/0-10 | AXK1730TN |
| Product family | Needle roller thrust bearings | — | Thrust needle roller bearings / Metric series, separate type / Thrust needle roller and cage assembly(AXK,FNT) |
| Detailed type | Needle roller and cage thrust assembly | Axial needle roller and cage assembly | Needle roller bearings |
| Series | — | AXK1730 | — |
| Bore diameterd | 17 mm | 17 mm | — |
| Outside diameterD | 30 mm | 30 mm | — |
| WidthB | — | 2 mm | — |
| HeightH | 2 mm | — | — |
| Basic dynamic load ratingC | 11 kN | — | — |
| Basic static load ratingC0 | 40.5 kN | — | — |
| Fatigue load limitPu | 4.75 kN | — | 3.7 kN |
| Reference speednref | 4500 r/min | 4600 r/min | — |
| Limiting speednG | 9500 r/min | 12300 r/min | 14000 r/min |
| Mass≈m | 0.004 kg | 0.004096 kg | 0.004 kg |
| Cage | Sheet steel | — | — |
| Bearing material | Bearing steel | — | — |
| Minimum operating temperatureTmin | — | -20 °C | — |
| Maximum operating temperatureTmax | — | 120 °C | — |
| Classification | |||
| Official Category Path | — | — | Needle roller bearings - Thrust needle roller bearings - Metric series, separate type - Thrust needle roller and cage assembly(AXK,FNT) |
| Official Classification 1 | — | — | Needle roller bearings / Thrust needle roller bearings / Metric series, separate type / Thrust needle roller and cage assembly(AXK,FNT) |
| Engineering — Associated products | |||
| Universal washer | LS 1730 | — | — |
| Thin universal washer | AS 1730 | — | — |
| Shaft washer | WS 81103 | — | — |
| Housing washer | GS 81103 | — | — |
| Engineering — Dimensions | |||
| Diameter rollerD w | 2 mm | — | — |
| Raceway diameter (min.) roller and cage thrust assemblyE a | min. 19 mm | — | — |
| Raceway diameter (max.) roller and cage thrust assemblyE b | max. 29 mm | — | — |
| Logistics | |||
| Product net weight | 0.004 kg | — | — |
| eClass code | 23-05-09-03 | — | — |
| UNSPSC code | 31171512 | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396894 | — |
| Official Class Key | — | — | 090-040-010 |
| Base Type | — | AXK1730 | — |
| Gpsd Group | — | I01 | — |
| Product Line Id | — | 26 | — |
| Product identity | |||
| Official product category | Needle roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-thrust-bearings | — | — |
| Structure group ID | BGN_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Axial needle roller and cage assemblies, single direction, to DIN 5405-2 | — |
| Short Description | — | Axial needle roller and cage assembly | — |
| Properties | |||
| Bearing part | Needle roller and cage assembly | — | — |
| Roller grade | G2 | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Indicative carbon footprint for new product | 0.01 kg CO 2 e | — | — |
| Technical Data | |||
| Dc1 | — | — | 17 mm |
| Dc | — | — | 30 mm |
| Dw | — | — | 2 mm |
| Bore Diameter Cage (Dc1) | — | 17 mm | — |
| Ea | — | — | 28.7 mm |
| Outside Diameter (Dc) | — | 30 mm | — |
| Eb | — | — | 18.3 mm |
| Rolling Element Diameter (Dw) | — | 2 mm | — |
| Ra(Max.) | — | — | 0.3 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 12,000 N | — |
| Basic Load Ratings Ca | — | — | 11.7 kN |
| Basic Static Load Rating, Axial (C0A) | — | 39,500 N | — |
| Basic Load Ratings C0A | — | — | 38.7 kN |
| Operating Temperature Min. (Tmin) | — | -20 °C | — |
| Fatigue Load Limit : Cu | — | — | 3.70 kN |
| Raceway Dimension (Eb) | — | 19 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 14000 min-1 |
| Operating Temperature Max. (Tmax) | — | 120 °C | — |
| (Refer.)Mass | — | — | 0.004 kg |
| Limiting Speed (Limiting Spe) | — | 12,300 1/min | — |
| Washer Dimensions : D,D1 | — | — | 30 mm |
| Reference Speed (Nϑr) | — | 4,600 1/min | — |
| Washer Dimensions : D1 | — | — | 18 mm |
| Fatigue Load Limit, Axial (Cua) | — | 4,000 N | — |
| Thin Washer Dimensions : H1 | — | — | 1.00 mm |
| Raceway Dimension (Ea) | — | 29 mm | — |
| Thin Washer No. | — | — | AS1730 |
| Thin (Refer.)Mass | — | — | 0.003 kg |
| Heavy(Ls) Washer Dimensions : H | — | — | 2.75 mm |
| Heavy(Ls) Washer Dimensions : A | — | — | 0.50 mm |
| Heavy(Ls) Washer No. | — | — | LS1730 |
| Heavy(Ls) (Refer.)Mass | — | — | 0.011 kg |
| Heavy Washer Dimensions : H | — | — | 2.75 mm |
| Heavy Washer Dimensions : R(Min.) | — | — | 0.30 mm |
| Heavy Washer No(Shaft Piloted) | — | — | WS.81103 |
| Heavy Washer No.(Housing Piloted) | — | — | GS.81103 |
| Heavy (Refer.)Mass | — | — | 0.011 kg |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.