Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 812-630-M. This table explores the base group 812; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“812” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKF812/500 M500 × 670 × mm | INA812/500-M500 × 670 × 135 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | 812/500 M | 812/500-M |
| Product family | Cylindrical roller thrust bearings | — |
| Detailed type | Single row cylindrical roller thrust bearing, single direction | Axial cylindrical roller bearing |
| Series | — | 812/500 |
| Bore diameterd | 500 mm | 500 mm |
| Outside diameterD | 670 mm | 670 mm |
| WidthB | — | 135 mm |
| HeightH | 135 mm | — |
| Basic dynamic load ratingC | 3200 kN | — |
| Basic static load ratingC0 | 16300 kN | — |
| Fatigue load limitPu | 1060 kN | — |
| Reference speednref | 190 r/min | 135 r/min |
| Limiting speednG | 380 r/min | 490 r/min |
| Mass≈m | 144 kg | 158.27 kg |
| Bearing material | Bearing steel | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | min. 661 mm | — |
| Abutment diameter housingD a | max. 540 mm | — |
| Fillet radiusr a | max. 4 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 21.3 | — |
| Engineering — Dimensions | ||
| Outside diameter shaft washerd 1 | 665 mm | — |
| Bore diameter housing washerD 1 | 505 mm | — |
| Height shaft washerB | 39.5 mm | — |
| Chamfer dimension housing washerr 1,2 | min. 5 mm | — |
| Engineering — Included products | ||
| Shaft washer | IW-812/500 | — |
| Housing washer | OW-812/500 | — |
| Logistics | ||
| Product net weight | 144.0 kg | — |
| eClass code | 23-05-11-01 | — |
| UNSPSC code | 31171505 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 395997 |
| Base Type | — | 812/500 |
| Gpsd Group | — | I02 |
| Product Line Id | — | 75 |
| Product identity | ||
| Official product category | Cylindrical roller thrust bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-thrust-bearings | — |
| Structure group ID | BGS_001_002_003 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Axial cylindrical roller bearing 812..-M, single row |
| Short Description | — | Axial cylindrical roller bearing |
| Properties | ||
| Bearing part | Complete bearing | — |
| Axial load capability | Single-direction | — |
| Number of rows | 1 | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Indicative carbon footprint for new product | 533.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 500 mm |
| Outside Diameter (D) | — | 670 mm |
| Width (B) | — | 135 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 4,250,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 18,000,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Limiting Speed (Ng) | — | 490 1/min |
| Reference Speed (Nϑr) | — | 135 1/min |
| Maximum Recess Radius (Ra Max) | — | 5 mm |
| Rip Diameter Shaft Washer (D1) | — | 665 mm |
| Bore Diameter Housing Washer (D1) | — | 505 mm |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm |
| Fatigue Load Limit, Axial (Cua) | — | 1,260,000 N |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.