Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 7418-GAM. This table explores the base group 7418; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7418” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7418 CBM90 × 225 × 54 mm | FAG7418-B-XL-MP90 × 225 × 54 mm | KOYO7418 FY90 × 225 × 54 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 7418 CBM | 7418-B-XL-MP | 7418 FY |
| Product family | Angular contact ball bearings | — | Single-row / With machined cage |
| Detailed type | Single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7418 | — |
| Bore diameterd | 90 mm | 90 mm | 90 mm |
| Outside diameterD | 225 mm | 225 mm | 225 mm |
| WidthB | 54 mm | 54 mm | 54 mm |
| Basic dynamic load ratingC | 212 kN | 232 kN | 270 kN |
| Basic static load ratingC0 | 193 kN | 206 kN | 196 kN |
| Fatigue load limitPu | 6.55 kN | 11.4 kN | 8.1 kN |
| Reference speednref | 3800 r/min | 3300 r/min | — |
| Limiting speednG | 3800 r/min | 5100 r/min | 2800 r/min |
| Mass≈m | 11.1 kg | 11.1 kg | 11.4 kg |
| Precision class | P6 | PN — Normal (ISO 492:2023) | — |
| Sealing | Without | Without — Not sealed | — |
| Cage | Machined brass | MP — Solid brass cage, ball guided | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | — | Angular contact ball bearings / Single-row / With machined cage |
| Dimensions | |||
| Contact angle | 37.0 ° | — | — |
| Minimum chamfer dimensionrmin | — | 4 mm | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — |
| Minimum chamfer dimensionr1 min | — | 1.5 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.059 in | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 173.2 mm | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 6.819 in | — |
| Shoulder diameter on inner ring wide side faced1 | — | 145.11 mm | — |
| Shoulder diameter on inner ring wide side faced1 | — | 5.713 in | — |
| Distance between the apexes of the pressure conesa | — | 93.1 mm | — |
| Distance between the apexes of the pressure conesa | — | 3.665 in | — |
| Contact angleα | — | 40 ° | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 96 mm | — | — |
| Abutment diameter housingD a | max. 215 mm | — | — |
| Diameter of housing abutmentD b | max. 215 mm | — | — |
| Radius of filletr a | max. 2 mm | — | — |
| Radius of filletr b | max. 2 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 0.73 | — | — |
| Minimum radial load factork r | 0.1 | — | — |
| Limiting valuee | 1.1 | — | — |
| Engineering — Calculation data — Bearing pair arranged back-to-back or face-to-face | |||
| Calculation factor (back-to-back, face-to-face)X | 0.57 | — | — |
| Calculation factor (back-to-back, face-to-face)Y 0 | 0.52 | — | — |
| Calculation factor (back-to-back, face-to-face)Y 1 | 0.55 | — | — |
| Calculation factor (back-to-back, face-to-face)Y 2 | 0.93 | — | — |
| Engineering — Calculation data — Single bearing or bearing pair arranged in tandem | |||
| Calculation factor (single, tandem)X | 0.35 | — | — |
| Calculation factor (single, tandem)Y 0 | 0.26 | — | — |
| Calculation factor (single, tandem)Y 2 | 0.57 | — | — |
| Engineering — Dimensions | |||
| Deviation limits of mid-range bore diametert Δdmp | -0.015 to 0 mm | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.02 to 0 mm | — | — |
| Deviation limits of ring widtht ΔBs | -0.2 to 0 mm | — | — |
| Shoulder diameter of inner ring (large side face)d 1 | ≈ 132 mm | — | — |
| Shoulder diameter of outer ring (large side face)D 1 | ≈ 182.1 mm | — | — |
| Distance side face to pressure pointa | 95 mm | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — | — |
| ISO tolerance class for dimensions | P6 | — | — |
| Engineering — Tolerances of run-out | |||
| Range of section height at inner ring of assembled bearingt Kia | 13 µm | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 25 µm | — | — |
| ISO tolerance class for geometrical tolerances | P6 | — | — |
| Logistics | |||
| Product net weight | 11.1 kg | — | — |
| eClass code | 23-05-08-03 | — | — |
| UNSPSC code | 31171531 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 232,000 N | — |
| Basic dynamic load rating, radialCr | — | 52,158.273 lbf | — |
| Basic static load rating, radialC0r | — | 206,000 N | — |
| Basic static load rating, radialC0r | — | 46,312.95 lbf | — |
| Fatigue load limit, radialCur | — | 11,400 N | — |
| Fatigue load limit, radialCur | — | 2,562.95 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 1794531 | — |
| Official Class Key | — | — | 020-010-000 |
| Base Type | — | 7418 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | XL | — |
| Base product | — | 2305080301 | — |
| Mounting dimensions | |||
| Minimum diameter of shaft shoulderda min | — | 110 mm | — |
| Minimum diameter of shaft shoulderda min | — | 4.331 in | — |
| Maximum diameter of housing shoulderDa max | — | 205 mm | — |
| Maximum diameter of housing shoulderDa max | — | 8.071 in | — |
| Maximum diameter of housing shoulderDb max | — | 214 mm | — |
| Maximum diameter of housing shoulderDb max | — | 8.425 in | — |
| Maximum fillet radius of shaftra max | — | 3 mm | — |
| Maximum fillet radius of shaftra max | — | 0.118 in | — |
| Maximum fillet radius of housingra1 max | — | 1.5 mm | — |
| Maximum fillet radius of housingra1 max | — | 0.059 in | — |
| Product characteristics | |||
| Design variant | — | B | — |
| Type of SealWithout | — | Not sealed | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Product identity | |||
| Official product category | Angular contact ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings | — | — |
| Structure group ID | BA1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Angular contact ball bearing 74..-B-XL-MP, single row, X-life, solid brass cage | — |
| Short Description | — | Angular contact ball bearing | — |
| Properties | |||
| Contact type | Normal contact (two-point contact) | — | — |
| Number of rows | 1 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Ring type | One-piece inner and outer rings | — | — |
| Matched arrangement | No | — | — |
| Universal matching bearing | Yes | — | — |
| Axial internal clearance | Not applicable | — | — |
| Matched condition (axial clearance/ preload) | Axial clearance CB | — | — |
| Tolerance class | Class 6 (P6) | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 41.1 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 225 mm |
| B | — | — | 54 mm |
| R(Min.) | — | — | 4 mm |
| Bore Diameter (D) | — | 90 mm | — |
| R1(Min.) | — | — | 1.5 mm |
| Outside Diameter (D) | — | 225 mm | — |
| Basic Load Ratings : Cr | — | — | 270 kN |
| Width (B) | — | 54 mm | — |
| Basic Load Ratings : C0R | — | — | 196 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 232,000 N | — |
| Fatigue Load Limit : Cu | — | — | 8.10 kN |
| Basic Static Load Rating, Radial (C0R) | — | 206,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speeds(Grease Lub.) | — | — | 2800 min-1 |
| Limiting Speed (Ng) | — | 5,100 1/min | — |
| Limiting Speeds(Oil Lub.) | — | — | 3700 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Load Center Spread : A | — | — | 72.5 mm |
| Reference Speed (Nϑr) | — | 3,300 1/min | — |
| Da(Min.) | — | — | 108 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 214 mm | — |
| Da(Max.) | — | — | 207 mm |
| Fatigue Load Limit, Radial (Cur) | — | 11,400 N | — |
| Ra(Max.) | — | — | 3 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 110 mm | — |
| Mass(Refer.) | — | — | 11.4 kg |
| Shoulder Diameter Inner Ring (D1) | — | 145.11 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 205 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 1.5 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 173.2 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.5 mm | — |
| Contact Angle (Α) | — | 40 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 93.1 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.