Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7417” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7417 BACBMC85 × 210 × 52 mm | KOYO7417 FY85 × 210 × 52 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | KOYO |
| Designation | 7417 BACBMC | 7417 FY |
| Product family | Angular contact ball bearings | Single-row / With machined cage |
| Detailed type | Single row angular contact ball bearing | Angular contact ball bearings |
| Bore diameterd | 85 mm | 85 mm |
| Outside diameterD | 210 mm | 210 mm |
| WidthB | 52 mm | 52 mm |
| Basic dynamic load ratingC | 190 kN | 255 kN |
| Basic static load ratingC0 | 166 kN | 180 kN |
| Fatigue load limitPu | 5.85 kN | 7.65 kN |
| Reference speednref | 4000 r/min | — |
| Limiting speednG | 4000 r/min | 3000 r/min |
| Mass≈m | 9.28 kg | 8.54 kg |
| Precision class | P6 | — |
| Sealing | Without | — |
| Cage | Machined brass | — |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Classification | ||
| Official Category Path | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | Angular contact ball bearings / Single-row / With machined cage |
| Dimensions | ||
| Contact angle | 40.0 ° | — |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 55 mm | — |
| Abutment diameter housingD a | max. 110 mm | — |
| Diameter of housing abutmentD b | max. 191 mm | — |
| Radius of filletr a | max. 2 mm | — |
| Radius of filletr b | max. 2 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 0.54 | — |
| Minimum radial load factork r | 0.1 | — |
| Limiting valuee | 1.1 | — |
| Engineering — Calculation data — Bearing pair arranged back-to-back or face-to-face | ||
| Calculation factor (back-to-back, face-to-face)X | 0.57 | — |
| Calculation factor (back-to-back, face-to-face)Y 0 | 0.52 | — |
| Calculation factor (back-to-back, face-to-face)Y 1 | 0.55 | — |
| Calculation factor (back-to-back, face-to-face)Y 2 | 0.93 | — |
| Engineering — Calculation data — Single bearing or bearing pair arranged in tandem | ||
| Calculation factor (single, tandem)X | 0.35 | — |
| Calculation factor (single, tandem)Y 0 | 0.26 | — |
| Calculation factor (single, tandem)Y 2 | 0.57 | — |
| Engineering — Dimensions | ||
| Deviation limits of mid-range bore diametert Δdmp | -0.015 to 0 mm | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.02 to 0 mm | — |
| Deviation limits of ring widtht ΔBs | -0.2 to 0 mm | — |
| Shoulder diameter of inner ring (large side face)d 1 | ≈ 127.631 mm | — |
| Shoulder diameter of outer ring (large side face)D 1 | ≈ 166.95 mm | — |
| Distance side face to pressure pointa | 88 mm | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — |
| ISO tolerance class for dimensions | P6 | — |
| Engineering — Tolerances of run-out | ||
| Range of section height at inner ring of assembled bearingt Kia | 13 µm | — |
| Range of section height at outer ring of assembled bearingt Kea | 25 µm | — |
| ISO tolerance class for geometrical tolerances | P6 | — |
| Logistics | ||
| Product net weight | 9.28 kg | — |
| eClass code | 23-05-08-03 | — |
| UNSPSC code | 31171531 | — |
| Manufacturer Identity | ||
| Official Class Key | — | 020-010-000 |
| Product identity | ||
| Official product category | Angular contact ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings | — |
| Structure group ID | BA1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Properties | ||
| Contact type | Normal contact (two-point contact) | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Ring type | One-piece inner and outer rings | — |
| Matched arrangement | No | — |
| Universal matching bearing | Yes | — |
| Axial internal clearance | Not applicable | — |
| Matched condition (axial clearance/ preload) | Axial clearance CB | — |
| Tolerance class | Class 6 (P6) | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 34.3 kg CO 2 e | — |
| Technical Data | ||
| d | — | 210 mm |
| B | — | 52 mm |
| R(Min.) | — | 4 mm |
| R1(Min.) | — | 1.5 mm |
| Basic Load Ratings : Cr | — | 255 kN |
| Basic Load Ratings : C0R | — | 180 kN |
| Fatigue Load Limit : Cu | — | 7.65 kN |
| Limiting Speeds(Grease Lub.) | — | 3000 min-1 |
| Limiting Speeds(Oil Lub.) | — | 3900 min-1 |
| Load Center Spread : A | — | 68.7 mm |
| Da(Min.) | — | 103 mm |
| Da(Max.) | — | 192 mm |
| Ra(Max.) | — | 3 mm |
| Mass(Refer.) | — | 8.54 kg |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.