Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 7415-BCBM. This table explores the base group 7415; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7415” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7415 BCBM75 × 190 × 45 mm | FAG7415-B-XL-MP75 × 190 × 45 mm | TIMKEN7415WNMBRSU75 × 190 × 45 mm | KOYO7415 FY75 × 190 × 45 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | TIMKEN | KOYO |
| Designation | 7415 BCBM | 7415-B-XL-MP | 7415WNMBRSU | 7415 FY |
| Product family | Angular contact ball bearings | — | Angular Contact Ball | Single-row / With machined cage |
| Detailed type | Single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7415 | 7400 | — |
| Bore diameterd | 75 mm | 75 mm | 75 mm | 75 mm |
| Outside diameterD | 190 mm | 190 mm | 190 mm | 190 mm |
| WidthB | 45 mm | 45 mm | 45 mm | 45 mm |
| Basic dynamic load ratingC | 168 kN | 167 kN | 178 kN | 214 kN |
| Basic static load ratingC0 | 140 kN | 138 kN | 150 kN | 141 kN |
| Fatigue load limitPu | 5.1 kN | 8.3 kN | — | 6.3 kN |
| Reference speednref | 4500 r/min | 3750 r/min | — | — |
| Limiting speednG | 6000 r/min | 6400 r/min | — | 3300 r/min |
| Mass≈m | 6.85 kg | 6.59 kg | 6.75 kg | 5.9 kg |
| Precision class | P6 | PN — Normal (ISO 492:2023) | — | — |
| Sealing | Without | Without — Not sealed | Open | — |
| Cage | Machined brass | MP — Solid brass cage, ball guided | Brass cage | — |
| Bearing material | Bearing steel | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Calculation Factors | ||||
| K Factor | — | — | 0.00 | — |
| Y1 Factor | — | — | 0.00 | — |
| Y2 Factor | — | — | 0.00 | — |
| Y0 Factor | — | — | 0.26 | — |
| E Factor | — | — | 0.00 | — |
| Cg Factor | — | — | 0.0637 | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | — | — | Angular contact ball bearings / Single-row / With machined cage |
| Dimensions | ||||
| Contact angle | 40.0 ° | — | — | — |
| Minimum chamfer dimensionrmin | — | 3 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — | — |
| Minimum chamfer dimensionr1 min | — | 1.1 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.043 in | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 144.34 mm | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 5.683 in | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 123.1 mm | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 4.846 in | — | — |
| Distance between the apexes of the pressure conesa | — | 78.1 mm | — | — |
| Distance between the apexes of the pressure conesa | — | 3.075 in | — | — |
| Contact angleα | — | 40 ° | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | min. 55 mm | — | — | — |
| Abutment diameter housingD a | max. 110 mm | — | — | — |
| Diameter of housing abutmentD b | max. 170.8 mm | — | — | — |
| Radius of filletr a | max. 2 mm | — | — | — |
| Radius of filletr b | max. 2 mm | — | — | — |
| Engineering — Calculation data | ||||
| Minimum axial load factorA | 0.38 | — | — | — |
| Minimum radial load factork r | 0.1 | — | — | — |
| Limiting valuee | 1.1 | — | — | — |
| Engineering — Calculation data — Bearing pair arranged back-to-back or face-to-face | ||||
| Calculation factor (back-to-back, face-to-face)X | 0.57 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 0 | 0.52 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 1 | 0.55 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 2 | 0.93 | — | — | — |
| Engineering — Calculation data — Single bearing or bearing pair arranged in tandem | ||||
| Calculation factor (single, tandem)X | 0.35 | — | — | — |
| Calculation factor (single, tandem)Y 0 | 0.26 | — | — | — |
| Calculation factor (single, tandem)Y 2 | 0.57 | — | — | — |
| Engineering — Dimensions | ||||
| Deviation limits of mid-range bore diametert Δdmp | -0.012 to 0 mm | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.02 to 0 mm | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.15 to 0 mm | — | — | — |
| Shoulder diameter of inner ring (large side face)d 1 | ≈ 119.6 mm | — | — | — |
| Shoulder diameter of inner ring (small side face)d 2 | ≈ 97.65 mm | — | — | — |
| Shoulder diameter of outer ring (large side face)D 1 | ≈ 147.6 mm | — | — | — |
| Distance side face to pressure pointa | 78 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 3 mm | — | — | — |
| ISO tolerance class for dimensions | P6 | — | — | — |
| Engineering — Tolerances of run-out | ||||
| Range of section height at inner ring of assembled bearingt Kia | 10 µm | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 25 µm | — | — | — |
| ISO tolerance class for geometrical tolerances | P6 | — | — | — |
| Logistics | ||||
| Product net weight | 6.85 kg | — | — | — |
| eClass code | 23-05-08-03 | — | — | — |
| UNSPSC code | 31171531 | — | — | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 167,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 37,544.964 lbf | — | — |
| Basic static load rating, radialC0r | — | 138,000 N | — | — |
| Basic static load rating, radialC0r | — | 31,025.18 lbf | — | — |
| Fatigue load limit, radialCur | — | 8,300 N | — | — |
| Fatigue load limit, radialCur | — | 1,866.007 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 360189 | — | — |
| Material Number | — | — | 000000000100022543 | — |
| Official Class Key | — | — | — | 020-010-000 |
| Base Type | — | 7415 | — | — |
| World Assembly Part Number | — | — | 7415WNMBRSU | — |
| Old Designation | — | ["7415-B-MP","7415B.MP"] | — | — |
| Upc | — | — | 0087796068995 | — |
| Gpsd Group | — | S03 | — | — |
| Product Line Id | — | 14 | — | — |
| X Life Marking | — | XL | — | — |
| Official Source System | — | — | CORE BP - DS DF | — |
| Official Last Run | — | — | 2026-08-23T20:02:46.73 | — |
| SAP material number | — | 0191189960000 | — | — |
| Base product | — | 2305080301 | — | — |
| Bearing X designation | — | 7415-B-XL-MP | — | — |
| Mounting Manager ID | — | 7415-B-XL-MP | — | — |
| Mounting dimensions | ||||
| Minimum diameter of shaft shoulderda min | — | 91 mm | — | — |
| Minimum diameter of shaft shoulderda min | — | 3.583 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 174 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 6.85 in | — | — |
| Maximum diameter of housing shoulderDb max | — | 181 mm | — | — |
| Maximum diameter of housing shoulderDb max | — | 7.126 in | — | — |
| Maximum fillet radius of shaftra max | — | 2.5 mm | — | — |
| Maximum fillet radius of shaftra max | — | 0.098 in | — | — |
| Maximum fillet radius of housingra1 max | — | 1 mm | — | — |
| Maximum fillet radius of housingra1 max | — | 0.039 in | — | — |
| Product characteristics | ||||
| Design variant | — | B | — | — |
| Type of SealWithout | — | Not sealed | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — | — |
| Product identity | ||||
| Official product category | Angular contact ball bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings | — | — | — |
| Structure group ID | BA1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Type Description | — | — | Angular Contact Ball | — |
| Construction | — | Angular contact ball bearing 74..-B-XL-MP, single row, X-life, solid brass cage | Single Row Angular Contact Ball Bearing | Imperial Series | 2.9528 in Bore | 7.4803 in OD | 1.7717 in Width | Open | Cylindrical Bore | Brass Cage | 40° Contact Angle | ISO P0 Tolerance | — |
| Number Of Rows | 1 | — | 1 | — |
| Tapered Bore | — | — | N | — |
| Short Description | — | Angular contact ball bearing | — | — |
| Properties | ||||
| Contact type | Normal contact (two-point contact) | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Ring type | One-piece inner and outer rings | — | — | — |
| Matched arrangement | No | — | — | — |
| Universal matching bearing | Yes | — | — | — |
| Axial internal clearance | Not applicable | — | — | — |
| Matched condition (axial clearance/ preload) | Axial clearance CB | — | — | — |
| Tolerance class | Class 6 (P6) | — | — | — |
| Material, bearing | Bearing steel | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 25.3 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 190 mm |
| B | — | — | — | 45 mm |
| Overall Width | — | — | 0.000 mm | — |
| R(Min.) | — | — | — | 3 mm |
| Radial Rating | — | — | 197,000 N | — |
| R1(Min.) | — | — | — | 1.1 mm |
| Axial Rating | — | — | 0 N | — |
| Basic Load Ratings : Cr | — | — | — | 214 kN |
| Bore Diameter (D) | — | 75 mm | — | — |
| Dynamic Rating C1 | — | — | 178,000 N | — |
| Basic Load Ratings : C0R | — | — | — | 141 kN |
| Outside Diameter (D) | — | 190 mm | — | — |
| Dynamic Rating C90 | — | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | — | 6.30 kN |
| Width (B) | — | 45 mm | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 167,000 N | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 3300 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 138,000 N | — | — |
| Static Radial Rating C0 | — | — | 150,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 4400 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Extended Dynamic Rating Ce | — | — | 197,000 N | — |
| Load Center Spread : A | — | — | — | 61.3 mm |
| Limiting Speed (Ng) | — | 6,400 1/min | — | — |
| Static Axial Rating C0A | — | — | 0 N | — |
| Da(Min.) | — | — | — | 89 mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Da(Max.) | — | — | — | 176 mm |
| Reference Speed (Nϑr) | — | 3,750 1/min | — | — |
| Ra(Max.) | — | — | — | 2.5 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 181 mm | — | — |
| Mass(Refer.) | — | — | — | 5.90 kg |
| Fatigue Load Limit, Radial (Cur) | — | 8,300 N | — | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 91 mm | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 123.1 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 174 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — | — |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 1 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 144.34 mm | — | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.1 mm | — | — |
| Contact Angle (Α) | — | 40 ° | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 78.1 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.