Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 7405BDF. This table explores the base group 7405; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7405” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7405 BM25 × 80 × 21 mm | FAG7405-B-XL-MP25 × 80 × 21 mm | TIMKEN7405W25 × 80 × 21 mm | KOYO740525 × 80 × 21 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | TIMKEN | KOYO |
| Designation | 7405 BM | 7405-B-XL-MP | 7405W | 7405 |
| Product family | Angular contact ball bearings | — | Angular Contact Ball | Single-row / With pressed cage |
| Detailed type | Single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7405 | 7400 | — |
| Bore diameterd | 25 mm | 25 mm | 25 mm | 25 mm |
| Outside diameterD | 80 mm | 80 mm | 80 mm | 80 mm |
| WidthB | 21 mm | 21 mm | 21 mm | 21 mm |
| Basic dynamic load ratingC | 39.7 kN | 43.5 kN | 47.2 kN | 53.3 kN |
| Basic static load ratingC0 | 23.6 kN | 26 kN | 26 kN | 25.7 kN |
| Fatigue load limitPu | 1 kN | 1.8 kN | — | 2 kN |
| Reference speednref | 11000 r/min | 7500 r/min | — | — |
| Limiting speednG | 15000 r/min | 16600 r/min | — | 6500 r/min |
| Mass≈m | 0.61 kg | 0.586 kg | 0.53 kg | 0.527 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — | — |
| Sealing | Without | Without — Not sealed | Open | — |
| Cage | Machined brass | MP — Solid brass cage, ball guided | Steel cage | — |
| Bearing material | Bearing steel | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Calculation Factors | ||||
| K Factor | — | — | 0.00 | — |
| Y1 Factor | — | — | 0.00 | — |
| Y2 Factor | — | — | 0.00 | — |
| Y0 Factor | — | — | 0.42 | — |
| E Factor | — | — | 0.00 | — |
| Cg Factor | — | — | 0.0351 | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Angular contact ball bearings - Single-row - With pressed cage |
| Official Classification 1 | — | — | — | Angular contact ball bearings / Single-row / With pressed cage |
| Dimensions | ||||
| Contact angle | 40.0 ° | — | — | — |
| Minimum chamfer dimensionrmin | — | 1.5 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.059 in | — | — |
| Minimum chamfer dimensionr1 min | — | 1 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.039 in | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 57.9 mm | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 2.28 in | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 48.23 mm | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 1.899 in | — | — |
| Distance between the apexes of the pressure conesa | — | 32.5 mm | — | — |
| Distance between the apexes of the pressure conesa | — | 1.28 in | — | — |
| Contact angleα | — | 40 ° | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | min. 55 mm | — | — | — |
| Abutment diameter housingD a | max. 110 mm | — | — | — |
| Diameter of housing abutmentD b | max. 71.1 mm | — | — | — |
| Radius of filletr a | max. 2 mm | — | — | — |
| Radius of filletr b | max. 2 mm | — | — | — |
| Engineering — Calculation data | ||||
| Minimum axial load factorA | 0.01 | — | — | — |
| Minimum radial load factork r | 0.1 | — | — | — |
| Limiting valuee | 1.1 | — | — | — |
| Engineering — Calculation data — Bearing pair arranged back-to-back or face-to-face | ||||
| Calculation factor (back-to-back, face-to-face)X | 0.57 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 0 | 0.52 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 1 | 0.55 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 2 | 0.93 | — | — | — |
| Engineering — Calculation data — Single bearing or bearing pair arranged in tandem | ||||
| Calculation factor (single, tandem)X | 0.35 | — | — | — |
| Calculation factor (single, tandem)Y 0 | 0.26 | — | — | — |
| Calculation factor (single, tandem)Y 2 | 0.57 | — | — | — |
| Engineering — Dimensions | ||||
| Deviation limits of mid-range bore diametert Δdmp | -0.01 to 0 mm | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.013 to 0 mm | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.12 to 0 mm | — | — | — |
| Shoulder diameter of inner ring (large side face)d 1 | ≈ 49.2 mm | — | — | — |
| Shoulder diameter of inner ring (small side face)d 2 | ≈ 40.32 mm | — | — | — |
| Shoulder diameter of outer ring (large side face)D 1 | ≈ 60.2 mm | — | — | — |
| Distance side face to pressure pointa | 33 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 1.5 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 1.5 mm | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — |
| Engineering — Tolerances of run-out | ||||
| Range of section height at inner ring of assembled bearingt Kia | 13 µm | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 25 µm | — | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — | — |
| Logistics | ||||
| Product net weight | 0.61 kg | — | — | — |
| eClass code | 23-05-08-03 | — | — | — |
| UNSPSC code | 31171531 | — | — | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 43,500 N | — | — |
| Basic dynamic load rating, radialCr | — | 9,779.676 lbf | — | — |
| Basic static load rating, radialC0r | — | 26,000 N | — | — |
| Basic static load rating, radialC0r | — | 5,845.324 lbf | — | — |
| Fatigue load limit, radialCur | — | 1,800 N | — | — |
| Fatigue load limit, radialCur | — | 404.676 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 360149 | — | — |
| Material Number | — | — | 000000000100018531 | — |
| Official Class Key | — | — | — | 020-010-000 |
| Base Type | — | 7405 | — | — |
| World Assembly Part Number | — | — | 7405W | — |
| Old Designation | — | ["7405-B-MP","7405B.MP"] | — | — |
| Upc | — | — | 0087796046948 | — |
| Gpsd Group | — | S03 | — | — |
| Product Line Id | — | 14 | — | — |
| X Life Marking | — | XL | — | — |
| Official Source System | — | — | CORE BP - DS DF | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.497 | — |
| SAP material number | — | 0191187240000 | — | — |
| Base product | — | 2305080301 | — | — |
| Bearing X designation | — | 7405-B-XL-MP | — | — |
| Mounting Manager ID | — | 7405-B-XL-MP | — | — |
| Mounting dimensions | ||||
| Minimum diameter of shaft shoulderda min | — | 36 mm | — | — |
| Minimum diameter of shaft shoulderda min | — | 1.417 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 69 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 2.717 in | — | — |
| Maximum diameter of housing shoulderDb max | — | 74.4 mm | — | — |
| Maximum diameter of housing shoulderDb max | — | 2.929 in | — | — |
| Maximum fillet radius of shaftra max | — | 1.5 mm | — | — |
| Maximum fillet radius of shaftra max | — | 0.059 in | — | — |
| Maximum fillet radius of housingra1 max | — | 1 mm | — | — |
| Maximum fillet radius of housingra1 max | — | 0.039 in | — | — |
| Product characteristics | ||||
| Design variant | — | B | — | — |
| Type of SealWithout | — | Not sealed | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — | — |
| Product identity | ||||
| Official product category | Angular contact ball bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings | — | — | — |
| Structure group ID | BA1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Type Description | — | — | Angular Contact Ball | — |
| Construction | — | Angular contact ball bearing 74..-B-XL-MP, single row, X-life, solid brass cage | Single Row Angular Contact Ball Bearing | Imperial Series | 0.9843 in Bore | 3.1496 in OD | 0.8268 in Width | Open | Cylindrical Bore | Steel Cage | 20° Contact Angle | ISO P0 Tolerance | — |
| Number Of Rows | 1 | — | 1 | — |
| Tapered Bore | — | — | N | — |
| Short Description | — | Angular contact ball bearing | — | — |
| Properties | ||||
| Contact type | Normal contact (two-point contact) | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Ring type | One-piece inner and outer rings | — | — | — |
| Matched arrangement | No | — | — | — |
| Axial internal clearance | Not applicable | — | — | — |
| Tolerance class | Normal | — | — | — |
| Material, bearing | Bearing steel | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 2.3 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 80 mm |
| Overall Width | — | — | 0.000 mm | — |
| B | — | — | — | 21 mm |
| Radial Rating | — | — | 52,500 N | — |
| R(Min.) | — | — | — | 1.5 mm |
| Axial Rating | — | — | 0 N | — |
| R1(Min.) | — | — | — | 1 mm |
| Bore Diameter (D) | — | 25 mm | — | — |
| Dynamic Rating C1 | — | — | 47,200 N | — |
| Basic Load Ratings : Cr | — | — | — | 53.3 kN |
| Outside Diameter (D) | — | 80 mm | — | — |
| Dynamic Rating C90 | — | — | 0 N | — |
| Basic Load Ratings : C0R | — | — | — | 25.7 kN |
| Width (B) | — | 21 mm | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | — | 2.00 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 43,500 N | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — |
| Basic Static Load Rating, Radial (C0R) | — | 26,000 N | — | — |
| Static Radial Rating C0 | — | — | 26,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 6500 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Extended Dynamic Rating Ce | — | — | 52,500 N | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 8800 min-1 |
| Limiting Speed (Ng) | — | 16,600 1/min | — | — |
| Static Axial Rating C0A | — | — | 0 N | — |
| Load Center Spread : A | — | — | — | 26.4 mm |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Da(Min.) | — | — | — | 33.5 mm |
| Reference Speed (Nϑr) | — | 7,500 1/min | — | — |
| Da(Max.) | — | — | — | 71.5 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 74.4 mm | — | — |
| Ra(Max.) | — | — | — | 1.5 mm |
| Fatigue Load Limit, Radial (Cur) | — | 1,800 N | — | — |
| Mass(Refer.) | — | — | — | 0.527 kg |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 36 mm | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 48.23 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 69 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm | — | — |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 1 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 57.9 mm | — | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1 mm | — | — |
| Contact Angle (Α) | — | 40 ° | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 32.5 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.