Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 7234ADF. This table explores the base group 7234; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7234” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7234 BCBM170 × 310 × 52 mm | FAG7234-B-MP170 × 310 × 52 mm | NSK7234A170 × 310 × 52 mm | KOYO7234 FY170 × 310 × 52 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | 7234 BCBM | 7234-B-MP | 7234A | 7234 FY |
| Product family | Angular contact ball bearings | — | Angular contact ball bearing | Single-row / With machined cage |
| Detailed type | Single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7234 | — | — |
| Bore diameterd | 170 mm | 170 mm | 170 mm | 170 mm |
| Outside diameterD | 310 mm | 310 mm | 310 mm | 310 mm |
| WidthB | 52 mm | 52 mm | 52 mm | 52 mm |
| Basic dynamic load ratingC | 281 kN | 270 kN | 325 kN | 340 kN |
| Basic static load ratingC0 | 345 kN | 355 kN | 360 kN | 331 kN |
| Fatigue load limitPu | 9.5 kN | 11.9 kN | — | 11 kN |
| Reference speednref | 2400 r/min | 2440 r/min | — | — |
| Limiting speednG | 2800 r/min | 3250 r/min | — | 2300 r/min |
| Mass≈m | 16.4 kg | 17.3 kg | 17.3 kg | 15.1 kg |
| Precision class | P6 | PN — Normal (ISO 492:2023) | — | — |
| Sealing | Without | Without — Not sealed | — | — |
| Cage | Machined brass | MP — Solid brass cage, ball guided | Machined brass, inner-ring guided | — |
| Bearing material | Bearing steel | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — |
| Boundary dimensions | ||||
| Individual bearing widthB | — | — | 52 mm | — |
| Minimum bearing chamferr min. | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 1.5 mm | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | — | — | Angular contact ball bearings / Single-row / With machined cage |
| Construction | ||||
| Nominal contact angleα | — | — | 30 ° | — |
| Standard cage code | — | — | M usually omitted | — |
| Optional cage codes — ratings require separate confirmation | — | — | None listed | — |
| Catalogue matching scope | — | — | DB, DF, DT | — |
| Cage material and construction | — | — | Machined brass, inner-ring guided | — |
| Construction / arrangement | — | — | Single-row angular contact bearing | — |
| Dimensions | ||||
| Contact angle | 40.0 ° | — | — | — |
| Minimum chamfer dimensionrmin | — | 4 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | — | 1.5 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.059 in | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 255.8 mm | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 10.071 in | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 227.38 mm | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 8.952 in | — | — |
| Distance between the apexes of the pressure conesa | — | 126.7 mm | — | — |
| Distance between the apexes of the pressure conesa | — | 4.988 in | — | — |
| Contact angleα | — | 40 ° | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | min. 187 mm | — | — | — |
| Abutment diameter housingD a | max. 293 mm | — | — | — |
| Diameter of housing abutmentD b | max. 301 mm | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — |
| Radius of filletr b | max. 1.5 mm | — | — | — |
| Engineering — Calculation data | ||||
| Minimum axial load factorA | 2 | — | — | — |
| Minimum radial load factork r | 0.08 | — | — | — |
| Limiting valuee | 1.1 | — | — | — |
| Engineering — Calculation data — Bearing pair arranged back-to-back or face-to-face | ||||
| Calculation factor (back-to-back, face-to-face)X | 0.57 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 0 | 0.52 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 1 | 0.55 | — | — | — |
| Calculation factor (back-to-back, face-to-face)Y 2 | 0.93 | — | — | — |
| Engineering — Calculation data — Single bearing or bearing pair arranged in tandem | ||||
| Calculation factor (single, tandem)X | 0.35 | — | — | — |
| Calculation factor (single, tandem)Y 0 | 0.26 | — | — | — |
| Calculation factor (single, tandem)Y 2 | 0.57 | — | — | — |
| Engineering — Dimensions | ||||
| Deviation limits of mid-range bore diametert Δdmp | -0.018 to 0 mm | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.025 to 0 mm | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.25 to 0 mm | — | — | — |
| Shoulder diameter of inner ring (large side face)d 1 | ≈ 227.4 mm | — | — | — |
| Shoulder diameter of inner ring (small side face)d 2 | ≈ 202.05 mm | — | — | — |
| Shoulder diameter of outer ring (large side face)D 1 | ≈ 261.25 mm | — | — | — |
| Distance side face to pressure pointa | 127 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 1.5 mm | — | — | — |
| ISO tolerance class for dimensions | P6 | — | — | — |
| Engineering — Tolerances of run-out | ||||
| Range of section height at inner ring of assembled bearingt Kia | 18 µm | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 30 µm | — | — | — |
| ISO tolerance class for geometrical tolerances | P6 | — | — | — |
| Load ratings | ||||
| Basic dynamic radial load ratingCr | — | — | 325000 N | — |
| Basic static radial load ratingC0r | — | — | 360000 N | — |
| Load-centre geometry | ||||
| Single-bearing effective load centrea | — | — | 95.3 mm | — |
| Logistics | ||||
| Product net weight | 16.4 kg | — | — | — |
| eClass code | 23-05-08-03 | — | — | — |
| UNSPSC code | 31171531 | — | — | — |
| Lubrication-qualified speed | ||||
| Limiting speed — grease | — | — | 1800 r/min | — |
| Limiting speed — oil | — | — | 2400 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 270,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 60,701.439 lbf | — | — |
| Basic static load rating, radialC0r | — | 355,000 N | — | — |
| Basic static load rating, radialC0r | — | 79,811.151 lbf | — | — |
| Fatigue load limit, radialCur | — | 11,900 N | — | — |
| Fatigue load limit, radialCur | — | 2,675.36 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 359278 | — | — |
| Official Class Key | — | — | — | 020-010-000 |
| Base Type | — | 7234 | — | — |
| Old Designation | — | ["7234B.MP"] | — | — |
| Gpsd Group | — | S03 | — | — |
| Product Line Id | — | 14 | — | — |
| SAP material number | — | 0191163060000 | — | — |
| Base product | — | 2305080301 | — | — |
| Bearing X designation | — | 7234-B-MP | — | — |
| Mounting Manager ID | — | 7234-B-MP | — | — |
| Grease application ID | — | 7234-B-MP | — | — |
| Mass reference | ||||
| Approximate mass | — | — | 17.3 kg | — |
| Mounting dimensions | ||||
| Minimum diameter of shaft shoulderda min | — | 187 mm | — | — |
| Minimum diameter of shaft shoulderda min | — | 7.362 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 293 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 11.535 in | — | — |
| Maximum diameter of housing shoulderDb max | — | 301 mm | — | — |
| Maximum diameter of housing shoulderDb max | — | 11.85 in | — | — |
| Maximum fillet radius of shaftra max | — | 3 mm | — | — |
| Maximum fillet radius of shaftra max | — | 0.118 in | — | — |
| Maximum fillet radius of housingra1 max | — | 1.5 mm | — | — |
| Maximum fillet radius of housingra1 max | — | 0.059 in | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 188 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | 292 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 3 mm | — |
| Product characteristics | ||||
| Design variant | — | B | — | — |
| Type of SealWithout | — | Not sealed | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — | — |
| Product identity | ||||
| Official product category | Angular contact ball bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings | — | — | — |
| Structure group ID | BA1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | Yes | — | — | — |
| Product Identity | ||||
| Construction | — | Angular contact ball bearing 72..-B-MP, single row, solid brass cage | — | — |
| Short Description | — | Angular contact ball bearing | — | — |
| Properties | ||||
| Contact type | Normal contact (two-point contact) | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Ring type | One-piece inner and outer rings | — | — | — |
| Matched arrangement | No | — | — | — |
| Universal matching bearing | Yes | — | — | — |
| Axial internal clearance | Not applicable | — | — | — |
| Matched condition (axial clearance/ preload) | Axial clearance CB | — | — | — |
| Tolerance class | Class 6 (P6) | — | — | — |
| Material, bearing | Bearing steel | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 60.7 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 310 mm |
| B | — | — | — | 52 mm |
| R(Min.) | — | — | — | 4 mm |
| R1(Min.) | — | — | — | 1.5 mm |
| Bore Diameter (D) | — | 170 mm | — | — |
| Basic Load Ratings : Cr | — | — | — | 340 kN |
| Outside Diameter (D) | — | 310 mm | — | — |
| Basic Load Ratings : C0R | — | — | — | 331 kN |
| Width (B) | — | 52 mm | — | — |
| Fatigue Load Limit : Cu | — | — | — | 11.0 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 270,000 N | — | — |
| Basic Static Load Rating, Radial (C0R) | — | 355,000 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 2300 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2800 min-1 |
| Limiting Speed (Ng) | — | 3,250 1/min | — | — |
| Load Center Spread : A | — | — | — | 95.3 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — |
| Da(Min.) | — | — | — | 188 mm |
| Reference Speed (Nϑr) | — | 2,440 1/min | — | — |
| Da(Max.) | — | — | — | 292 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 301 mm | — | — |
| Ra(Max.) | — | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 11,900 N | — | — |
| Mass(Refer.) | — | — | — | 15.1 kg |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 187 mm | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 227.38 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 293 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 1.5 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 255.8 mm | — | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.5 mm | — | — |
| Contact Angle (Α) | — | 40 ° | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 126.7 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.