Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7072” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7072 BGM360 × 540 × 82 mm | FAG7072-MP360 × 540 × 82 mm | KOYO7072 FY360 × 540 × 82 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 7072 BGM | 7072-MP | 7072 FY |
| Product family | Angular contact ball bearings | — | Single-row / With machined cage |
| Detailed type | Single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7072 | — |
| Bore diameterd | 360 mm | 360 mm | 360 mm |
| Outside diameterD | 540 mm | 540 mm | 540 mm |
| WidthB | 82 mm | 82 mm | 82 mm |
| Basic dynamic load ratingC | 462 kN | 540 kN | 644 kN |
| Basic static load ratingC0 | 850 kN | 1090 kN | 913 kN |
| Fatigue load limitPu | 17 kN | 27 kN | 22.2 kN |
| Reference speednref | 1200 r/min | 1090 r/min | — |
| Limiting speednG | 1200 r/min | 1700 r/min | 1000 r/min |
| Mass≈m | 62.5 kg | 66.5 kg | 64.6 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — |
| Sealing | Without | Without — Not sealed | — |
| Cage | Machined brass | MP — Solid brass cage, ball guided | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | — | Angular contact ball bearings / Single-row / With machined cage |
| Dimensions | |||
| Contact angle | 40.0 ° | — | — |
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Minimum chamfer dimensionr1 min | — | 2 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.079 in | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 475.45 mm | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 18.719 in | — |
| Shoulder diameter on inner ring wide side faced1 | — | 428.4 mm | — |
| Shoulder diameter on inner ring wide side faced1 | — | 16.866 in | — |
| Distance between the apexes of the pressure conesa | — | 170.9 mm | — |
| Distance between the apexes of the pressure conesa | — | 6.728 in | — |
| Contact angleα | — | 30 ° | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 378 mm | — | — |
| Abutment diameter housingD a | max. 522 mm | — | — |
| Diameter of housing abutmentD b | max. 531 mm | — | — |
| Radius of filletr a | max. 4 mm | — | — |
| Radius of filletr b | max. 2 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 11.3 | — | — |
| Minimum radial load factork r | 0.08 | — | — |
| Limiting valuee | 1.1 | — | — |
| Engineering — Calculation data — Bearing pair arranged back-to-back or face-to-face | |||
| Calculation factor (back-to-back, face-to-face)X | 0.57 | — | — |
| Calculation factor (back-to-back, face-to-face)Y 0 | 0.52 | — | — |
| Calculation factor (back-to-back, face-to-face)Y 1 | 0.55 | — | — |
| Calculation factor (back-to-back, face-to-face)Y 2 | 0.93 | — | — |
| Engineering — Calculation data — Single bearing or bearing pair arranged in tandem | |||
| Calculation factor (single, tandem)X | 0.35 | — | — |
| Calculation factor (single, tandem)Y 0 | 0.26 | — | — |
| Calculation factor (single, tandem)Y 2 | 0.57 | — | — |
| Engineering — Dimensions | |||
| Deviation limits of mid-range bore diametert Δdmp | -0.04 to 0 mm | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.05 to 0 mm | — | — |
| Deviation limits of ring widtht ΔBs | -0.4 to 0 mm | — | — |
| Shoulder diameter of inner ring (large side face)d 1 | ≈ 431.205 mm | — | — |
| Shoulder diameter of inner ring (small side face)d 2 | ≈ 398.625 mm | — | — |
| Shoulder diameter of outer ring (large side face)D 1 | ≈ 472.5 mm | — | — |
| Distance side face to pressure pointa | 230 mm | — | — |
| Chamfer dimensionr 1,2 | min. 5 mm | — | — |
| Chamfer dimensionr 3,4 | min. 2 mm | — | — |
| ISO tolerance class for dimensions | Normal | — | — |
| Engineering — Tolerances of run-out | |||
| Range of section height at inner ring of assembled bearingt Kia | 60 µm | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 100 µm | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — |
| Logistics | |||
| Product net weight | 62.5 kg | — | — |
| eClass code | 23-05-08-03 | — | — |
| UNSPSC code | 31171531 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 540,000 N | — |
| Basic dynamic load rating, radialCr | — | 121,402.878 lbf | — |
| Basic static load rating, radialC0r | — | 1,090,000 N | — |
| Basic static load rating, radialC0r | — | 245,053.957 lbf | — |
| Fatigue load limit, radialCur | — | 27,000 N | — |
| Fatigue load limit, radialCur | — | 6,070.144 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 1794507 | — |
| Official Class Key | — | — | 020-010-000 |
| Base Type | — | 7072 | — |
| Product Line Id | — | 14 | — |
| Base product | — | 2305080301 | — |
| Bearing X designation | — | 7072-MP | — |
| Mounting Manager ID | — | 7072-MP | — |
| Grease application ID | — | 7072-MP | — |
| Mounting dimensions | |||
| Minimum diameter of shaft shoulderda min | — | 378 mm | — |
| Minimum diameter of shaft shoulderda min | — | 14.882 in | — |
| Maximum diameter of housing shoulderDa max | — | 522 mm | — |
| Maximum diameter of housing shoulderDa max | — | 20.551 in | — |
| Maximum diameter of housing shoulderDb max | — | 531.2 mm | — |
| Maximum diameter of housing shoulderDb max | — | 20.913 in | — |
| Maximum fillet radius of shaftra max | — | 4 mm | — |
| Maximum fillet radius of shaftra max | — | 0.157 in | — |
| Maximum fillet radius of housingra1 max | — | 2 mm | — |
| Maximum fillet radius of housingra1 max | — | 0.079 in | — |
| Product characteristics | |||
| Type of SealWithout | — | Not sealed | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — |
| Product identity | |||
| Official product category | Angular contact ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings | — | — |
| Structure group ID | BA1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Angular contact ball bearing 70..-MP, single row, solid brass cage | — |
| Short Description | — | Angular contact ball bearing | — |
| Properties | |||
| Contact type | Normal contact (two-point contact) | — | — |
| Number of rows | 1 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Ring type | One-piece inner and outer rings | — | — |
| Matched arrangement | No | — | — |
| Universal matching bearing | Yes | — | — |
| Axial internal clearance | Not applicable | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 231.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 540 mm |
| B | — | — | 82 mm |
| Bore Diameter (D) | — | 360 mm | — |
| R(Min.) | — | — | 5 mm |
| Outside Diameter (D) | — | 540 mm | — |
| R1(Min.) | — | — | 2 mm |
| Width (B) | — | 82 mm | — |
| Basic Load Ratings : Cr | — | — | 644 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 540,000 N | — |
| Basic Load Ratings : C0R | — | — | 913 kN |
| Basic Static Load Rating, Radial (C0R) | — | 1,090,000 N | — |
| Fatigue Load Limit : Cu | — | — | 22.2 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 1,700 1/min | — |
| Limiting Speeds(Grease Lub.) | — | — | 1000 min-1 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| Limiting Speeds(Oil Lub.) | — | — | 1300 min-1 |
| Reference Speed (Nϑr) | — | 1,090 1/min | — |
| Load Center Spread : A | — | — | 170.9 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 531.2 mm | — |
| Da(Min.) | — | — | 382 mm |
| Fatigue Load Limit, Radial (Cur) | — | 27,000 N | — |
| Da(Max.) | — | — | 518 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 378 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Shoulder Diameter Inner Ring (D1) | — | 428.4 mm | — |
| Mass(Refer.) | — | — | 64.6 kg |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 522 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 2 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 475.45 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 2 mm | — |
| Contact Angle (Α) | — | 30 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 170.9 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.