Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 7064-MP. This table explores the base group 7064; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7064” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG7064-MP320 × 480 × 74 mm | KOYO7064 FY320 × 480 × 74 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 7064-MP | 7064 FY |
| Product family | — | Single-row / With machined cage |
| Detailed type | Angular contact ball bearings | Angular contact ball bearings |
| Series | 7064 | — |
| Bore diameterd | 320 mm | 320 mm |
| Outside diameterD | 480 mm | 480 mm |
| WidthB | 74 mm | 74 mm |
| Basic dynamic load ratingC | 440 kN | 546 kN |
| Basic static load ratingC0 | 800 kN | 722 kN |
| Fatigue load limitPu | 20.8 kN | 18.6 kN |
| Reference speednref | 1300 r/min | — |
| Limiting speednG | 1930 r/min | 1200 r/min |
| Mass≈m | 44.2 kg | 46 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Sealing | Without — Not sealed | — |
| Cage | MP — Solid brass cage, ball guided | — |
| Lubricant | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Classification | ||
| Official Category Path | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | Angular contact ball bearings / Single-row / With machined cage |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 4 mm | — |
| Minimum chamfer dimensionrmin | 0.157 in | — |
| Minimum chamfer dimensionr1 min | 1.5 mm | — |
| Minimum chamfer dimensionr1 min | 0.059 in | — |
| Shoulder diameter on outer ring wide side faceD1 | 422.15 mm | — |
| Shoulder diameter on outer ring wide side faceD1 | 16.62 in | — |
| Shoulder diameter on inner ring wide side faced1 | 381.4 mm | — |
| Shoulder diameter on inner ring wide side faced1 | 15.016 in | — |
| Distance between the apexes of the pressure conesa | 152.5 mm | — |
| Distance between the apexes of the pressure conesa | 6.004 in | — |
| Contact angleα | 30 ° | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 440,000 N | — |
| Basic dynamic load rating, radialCr | 98,920.863 lbf | — |
| Basic static load rating, radialC0r | 800,000 N | — |
| Basic static load rating, radialC0r | 179,856.115 lbf | — |
| Fatigue load limit, radialCur | 20,800 N | — |
| Fatigue load limit, radialCur | 4,676.259 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 359063 | — |
| Official Class Key | — | 020-010-000 |
| Base Type | 7064 | — |
| Old Designation | ["7064MP"] | — |
| Gpsd Group | S03 | — |
| Product Line Id | 14 | — |
| SAP material number | 0191131020000 | — |
| Base product | 2305080301 | — |
| Bearing X designation | 7064-MP | — |
| Mounting Manager ID | 7064-MP | — |
| Grease application ID | 7064-MP | — |
| Mounting dimensions | ||
| Minimum diameter of shaft shoulderda min | 334.6 mm | — |
| Minimum diameter of shaft shoulderda min | 13.173 in | — |
| Maximum diameter of housing shoulderDa max | 465.4 mm | — |
| Maximum diameter of housing shoulderDa max | 18.323 in | — |
| Maximum diameter of housing shoulderDb max | 473 mm | — |
| Maximum diameter of housing shoulderDb max | 18.622 in | — |
| Maximum fillet radius of shaftra max | 3 mm | — |
| Maximum fillet radius of shaftra max | 0.118 in | — |
| Maximum fillet radius of housingra1 max | 1.5 mm | — |
| Maximum fillet radius of housingra1 max | 0.059 in | — |
| Product characteristics | ||
| Type of SealWithout | Not sealed | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS1 | Rings dimensional stabilized up to 200° | — |
| Product Identity | ||
| Construction | Angular contact ball bearing 70..-MP, single row, solid brass cage | — |
| Short Description | Angular contact ball bearing | — |
| Technical Data | ||
| d | — | 480 mm |
| B | — | 74 mm |
| R(Min.) | — | 4 mm |
| R1(Min.) | — | 1.5 mm |
| Bore Diameter (D) | 320 mm | — |
| Basic Load Ratings : Cr | — | 546 kN |
| Outside Diameter (D) | 480 mm | — |
| Basic Load Ratings : C0R | — | 722 kN |
| Width (B) | 74 mm | — |
| Fatigue Load Limit : Cu | — | 18.6 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 440,000 N | — |
| Basic Static Load Rating, Radial (C0R) | 800,000 N | — |
| Limiting Speeds(Grease Lub.) | — | 1200 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speeds(Oil Lub.) | — | 1500 min-1 |
| Limiting Speed (Ng) | 1,930 1/min | — |
| Load Center Spread : A | — | 152.5 mm |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Da(Min.) | — | 338 mm |
| Reference Speed (Nϑr) | 1,300 1/min | — |
| Da(Max.) | — | 462 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | 473 mm | — |
| Ra(Max.) | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | 20,800 N | — |
| Mass(Refer.) | — | 46.0 kg |
| Minimum Diameter Shaft Shoulder (Da Min) | 334.6 mm | — |
| Shoulder Diameter Inner Ring (D1) | 381.4 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 465.4 mm | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — |
| Maximum Fillet Radius (Ra Max) | 3 mm | — |
| Maximum Recess Radius (Ra1 Max) | 1.5 mm | — |
| Shoulder Diameter Outer Ring (D1) | 422.15 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 1.5 mm | — |
| Contact Angle (Α) | 30 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 152.5 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.