Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 7052-ACD-P4ADGB. This table explores the base group 7052; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7052” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7052 ACD/P4A260 × 400 × 65 mm | FAG7052-MP260 × 400 × 65 mm | KOYO7052 FY260 × 400 × 65 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 7052 ACD/P4A | 7052-MP | 7052 FY |
| Product family | Super-precision angular contact ball bearings | — | Single-row / With machined cage |
| Detailed type | Super-precision, high-capacity, single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7052 | — |
| Bore diameterd | 260 mm | 260 mm | 260 mm |
| Outside diameterD | 400 mm | 400 mm | 400 mm |
| WidthB | 65 mm | 65 mm | 65 mm |
| Basic dynamic load ratingC | 397 kN | 370 kN | 407 kN |
| Basic static load ratingC0 | 600 kN | 600 kN | 478 kN |
| Fatigue load limitPu | 14 kN | 17.2 kN | 13.6 kN |
| Reference speednref | — | 1650 r/min | — |
| Limiting speednG | — | 2360 r/min | 1500 r/min |
| Mass≈m | 25.6 kg | 30.4 kg | 28.7 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Sealing | Without | Without — Not sealed | — |
| Cage | — | MP — Solid brass cage, ball guided | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | — | Angular contact ball bearings / Single-row / With machined cage |
| Dimensions | |||
| Contact angle | 25.0 ° | — | — |
| Minimum chamfer dimensionrmin | — | 4 mm | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — |
| Minimum chamfer dimensionr1 min | — | 1.5 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.059 in | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 349.6 mm | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 13.764 in | — |
| Shoulder diameter on inner ring wide side faced1 | — | 313.55 mm | — |
| Shoulder diameter on inner ring wide side faced1 | — | 12.344 in | — |
| Distance between the apexes of the pressure conesa | — | 127.8 mm | — |
| Distance between the apexes of the pressure conesa | — | 5.031 in | — |
| Contact angleα | 25 ° | 30 ° | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 275 mm | — | — |
| Diameter of shaft abutmentd b | min. 275 mm | — | — |
| Diameter of housing abutmentD a | max. 385 mm | — | — |
| Diameter of housing abutmentD b | max. 393 mm | — | — |
| Radius of filletr a | max. 3 mm | — | — |
| Radius of filletr b | max. 1.5 mm | — | — |
| Position of oil nozzled n | 315 mm | — | — |
| Engineering — Calculation data | |||
| Attainable speed for grease lubrication | 3000.0 r/min | — | — |
| Attainable speed for oil-air lubrication | 4500.0 r/min | — | — |
| Ball diameterD w | 44.45 mm | — | — |
| Number of rowsi | 1 | — | — |
| Number of balls (per bearing)z | 21 | — | — |
| Reference grease quantity (per bearing)G ref | 324 cm³ | — | — |
| Engineering — Calculation data — Correction factors for preload calculation | |||
| Correction factor dependent on bearing series and sizef | 1.1 | — | — |
| Correction factor dependent on contact anglef 1 | 0.99 | — | — |
| Correction factor, preload class Af 2A | 1 | — | — |
| Correction factor, preload class Bf 2B | 1 | — | — |
| Correction factor, preload class Cf 2C | 1.1 | — | — |
| Correction factor, preload class Df 2D | 1.1 | — | — |
| Correction factor for hybrid bearingsf HC | 1 | — | — |
| Engineering — Calculation data — Factors for equivalent bearing load calculation | |||
| Limiting valuee | 0.68 | — | — |
| Axial load factor (single, tandem)Y 1 | 0 | — | — |
| Axial load factor (single, tandem)Y 2 | 0.87 | — | — |
| Axial load factor (single, tandem)Y 0 | 0.38 | — | — |
| Radial load factor (single, tandem)X 1 | 1 | — | — |
| Radial load factor (single, tandem)X 2 | 0.41 | — | — |
| Radial load factor (single, tandem)X 0 | 0.5 | — | — |
| Axial load factor (back-to-back, face-to-face)Y 1 | 0.92 | — | — |
| Axial load factor (back-to-back, face-to-face)Y 2 | 1.4 | — | — |
| Axial load factor (back-to-back, face-to-face)Y 0 | 0.76 | — | — |
| Radial load factor (back-to-back, face-to-face)X 1 | 1 | — | — |
| Radial load factor (back-to-back, face-to-face)X 2 | 0.67 | — | — |
| Radial load factor (back-to-back, face-to-face)X 0 | 1 | — | — |
| Engineering — Calculation data — Preload and stiffness (back-to-back, face-to-face) | |||
| Preload, class AG A | 2480 N | — | — |
| Axial stiffnes for preload A (sets of two brgs back to back or face to face) | 617 N/µm | — | — |
| Preload, class BG B | 4960 N | — | — |
| Axial stiffness for preload B (sets of two brgs back-to-back or face-to-face) | 801 N/µm | — | — |
| Preload, class CG C | 9920 N | — | — |
| Axial stiffness for preload C (sets of two brgs back-to-back or face-to-face) | 1053 N/µm | — | — |
| Preload, class DG D | 19840 N | — | — |
| Axial stiffness for preload D (sets of two brgs back-to-back or face-to-face) | 1409 N/µm | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter of inner ring (large side face)d 1 | 303.2 mm | — | — |
| Shoulder diameter of inner ring (small side face)d 2 | 303.2 mm | — | — |
| Shoulder diameter of outer ring (large side face)D 1 | 356.8 mm | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — |
| Chamfer dimensionr 3,4 | min. 1.5 mm | — | — |
| Distance from side face to pressure pointa | 109.8 mm | — | — |
| Engineering — Engineering specifications | |||
| Universal matching bearing(s) | No | — | — |
| Logistics | |||
| Product net weight | 25.6 kg | — | — |
| eClass code | 23-05-08-04 | — | — |
| UNSPSC code | 31171531 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 370,000 N | — |
| Basic dynamic load rating, radialCr | — | 83,183.453 lbf | — |
| Basic static load rating, radialC0r | — | 600,000 N | — |
| Basic static load rating, radialC0r | — | 134,892.086 lbf | — |
| Fatigue load limit, radialCur | — | 17,200 N | — |
| Fatigue load limit, radialCur | — | 3,866.906 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 1794501 | — |
| Official Class Key | — | — | 020-010-000 |
| Base Type | — | 7052 | — |
| Product Line Id | — | 14 | — |
| Base product | — | 2305080301 | — |
| Bearing X designation | — | 7052-MP | — |
| Mounting Manager ID | — | 7052-MP | — |
| Grease application ID | — | 7052-MP | — |
| Mounting dimensions | |||
| Minimum diameter of shaft shoulderda min | — | 274.6 mm | — |
| Minimum diameter of shaft shoulderda min | — | 10.811 in | — |
| Maximum diameter of housing shoulderDa max | — | 385.4 mm | — |
| Maximum diameter of housing shoulderDa max | — | 15.173 in | — |
| Maximum diameter of housing shoulderDb max | — | 393 mm | — |
| Maximum diameter of housing shoulderDb max | — | 15.472 in | — |
| Maximum fillet radius of shaftra max | — | 3 mm | — |
| Maximum fillet radius of shaftra max | — | 0.118 in | — |
| Maximum fillet radius of housingra1 max | — | 1.5 mm | — |
| Maximum fillet radius of housingra1 max | — | 0.059 in | — |
| Product characteristics | |||
| Type of SealWithout | — | Not sealed | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — |
| Product identity | |||
| Official product category | Super-precision angular contact ball bearings | — | — |
| Official taxonomy path | /products/super-precision-bearings/angular-contact-ball-bearings | — | — |
| Structure group ID | BA1_010 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Angular contact ball bearing 70..-MP, single row, solid brass cage | — |
| Short Description | — | Angular contact ball bearing | — |
| Properties | |||
| Contact type | Normal contact (two-point contact) | — | — |
| Number of rows | 1 | — | — |
| Ring type | One-piece inner and outer rings | — | — |
| Design | High-capacity D | — | — |
| Universal matching bearing | No | — | — |
| Matched arrangement | No | — | — |
| Matched condition (axial clearance/ preload) | Not applicable | — | — |
| Tolerance class | P4A | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Indicative carbon footprint for new product | 94.7 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 400 mm |
| B | — | — | 65 mm |
| Bore Diameter (D) | — | 260 mm | — |
| R(Min.) | — | — | 4 mm |
| Outside Diameter (D) | — | 400 mm | — |
| R1(Min.) | — | — | 1.5 mm |
| Width (B) | — | 65 mm | — |
| Basic Load Ratings : Cr | — | — | 407 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 370,000 N | — |
| Basic Load Ratings : C0R | — | — | 478 kN |
| Basic Static Load Rating, Radial (C0R) | — | 600,000 N | — |
| Fatigue Load Limit : Cu | — | — | 13.6 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 2,360 1/min | — |
| Limiting Speeds(Grease Lub.) | — | — | 1500 min-1 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| Limiting Speeds(Oil Lub.) | — | — | 1900 min-1 |
| Reference Speed (Nϑr) | — | 1,650 1/min | — |
| Load Center Spread : A | — | — | 128.4 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 393 mm | — |
| Da(Min.) | — | — | 278 mm |
| Fatigue Load Limit, Radial (Cur) | — | 17,200 N | — |
| Da(Max.) | — | — | 382 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 274.6 mm | — |
| Ra(Max.) | — | — | 3 mm |
| Shoulder Diameter Inner Ring (D1) | — | 313.55 mm | — |
| Mass(Refer.) | — | — | 28.7 kg |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 385.4 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 1.5 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 349.6 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.5 mm | — |
| Contact Angle (Α) | — | 30 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 127.8 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.