Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7026” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7026 CD/P4A130 × 200 × 33 mm | FAG7026-XL-MP130 × 200 × 33 mm | NSK7026A130 × 200 × 33 mm | KOYO7026 FY130 × 200 × 33 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | 7026 CD/P4A | 7026-XL-MP | 7026A | 7026 FY |
| Product family | Super-precision angular contact ball bearings | — | Angular contact ball bearing | Single-row / With machined cage |
| Detailed type | Super-precision, high-capacity, single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7026 | — | — |
| Bore diameterd | 130 mm | 130 mm | 130 mm | 130 mm |
| Outside diameterD | 200 mm | 200 mm | 200 mm | 200 mm |
| WidthB | 33 mm | 33 mm | 33 mm | 33 mm |
| Basic dynamic load ratingC | 148 kN | 131 kN | 129 kN | 147 kN |
| Basic static load ratingC0 | 156 kN | 142 kN | 125 kN | 125 kN |
| Fatigue load limitPu | — | 7.7 kN | — | 5.25 kN |
| Reference speednref | — | 3450 r/min | — | — |
| Limiting speednG | — | 5500 r/min | — | 3500 r/min |
| Mass≈m | 3.18 kg | 4.07 kg | 3.68 kg | 3.43 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Sealing | Without | Without — Not sealed | — | — |
| Cage | — | MP — Solid brass cage, ball guided | Machined brass, inner-ring guided | — |
| Bearing material | Bearing steel | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Boundary dimensions | ||||
| Individual bearing widthB | — | — | 33 mm | — |
| Minimum bearing chamferr min. | — | — | 2 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 1 mm | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Angular contact ball bearings - Single-row - With machined cage |
| Official Classification 1 | — | — | — | Angular contact ball bearings / Single-row / With machined cage |
| Construction | ||||
| Nominal contact angleα | — | — | 30 ° | — |
| Standard cage code | — | — | M usually omitted | — |
| Optional cage codes — ratings require separate confirmation | — | — | T,TYN | — |
| Catalogue matching scope | — | — | DB, DF, DT | — |
| Cage material and construction | — | — | Machined brass, inner-ring guided | — |
| Construction / arrangement | — | — | Single-row angular contact bearing | — |
| Dimensions | ||||
| Contact angle | 15.0 ° | — | — | — |
| Minimum chamfer dimensionrmin | — | 2 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.079 in | — | — |
| Minimum chamfer dimensionr1 min | — | 1 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.039 in | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 171.96 mm | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 6.77 in | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 157.98 mm | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 6.22 in | — | — |
| Distance between the apexes of the pressure conesa | — | 64.1 mm | — | — |
| Distance between the apexes of the pressure conesa | — | 2.524 in | — | — |
| Contact angleα | — | 30 ° | — | — |
| Load ratings | ||||
| Basic dynamic radial load ratingCr | — | — | 129000 N | — |
| Basic static radial load ratingC0r | — | — | 125000 N | — |
| Load-centre geometry | ||||
| Single-bearing effective load centrea | — | — | 64.1 mm | — |
| Logistics | ||||
| Product net weight | 3.18 kg | — | — | — |
| eClass code | 23-05-08-04 | — | — | — |
| UNSPSC code | 31171531 | — | — | — |
| Lubrication-qualified speed | ||||
| Limiting speed — grease | — | — | 3400 r/min | — |
| Limiting speed — oil | — | — | 4500 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 131,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 29,451.439 lbf | — | — |
| Basic static load rating, radialC0r | — | 142,000 N | — | — |
| Basic static load rating, radialC0r | — | 31,924.46 lbf | — | — |
| Fatigue load limit, radialCur | — | 7,700 N | — | — |
| Fatigue load limit, radialCur | — | 1,731.115 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 1794488 | — | — |
| Official Class Key | — | — | — | 020-010-000 |
| Base Type | — | 7026 | — | — |
| Product Line Id | — | 14 | — | — |
| X Life Marking | — | XL | — | — |
| Base product | — | 2305080301 | — | — |
| Bearing X designation | — | 7026-XL-MP | — | — |
| Mounting Manager ID | — | 7026-XL-MP | — | — |
| Grease application ID | — | 7026-XL-MP | — | — |
| Mass reference | ||||
| Approximate mass | — | — | 3.68 kg | — |
| Mounting dimensions | ||||
| Minimum diameter of shaft shoulderda min | — | 138.8 mm | — | — |
| Minimum diameter of shaft shoulderda min | — | 5.465 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 191.2 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 7.528 in | — | — |
| Maximum diameter of housing shoulderDb max | — | 195.4 mm | — | — |
| Maximum diameter of housing shoulderDb max | — | 7.693 in | — | — |
| Maximum fillet radius of shaftra max | — | 2 mm | — | — |
| Maximum fillet radius of shaftra max | — | 0.079 in | — | — |
| Maximum fillet radius of housingra1 max | — | 1 mm | — | — |
| Maximum fillet radius of housingra1 max | — | 0.039 in | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 140 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | 190 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 2 mm | — |
| Performance | ||||
| Attainable speed for grease lubrication | 7000.0 r/min | — | — | — |
| Attainable speed for oil-air lubrication | 10000.0 r/min | — | — | — |
| Product characteristics | ||||
| Type of SealWithout | — | Not sealed | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — | — |
| Product identity | ||||
| Official product category | Super-precision angular contact ball bearings | — | — | — |
| Official taxonomy path | /products/super-precision-bearings/angular-contact-ball-bearings | — | — | — |
| Structure group ID | BA1_010 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Angular contact ball bearing 70..-XL-MP, single row, X-life, solid brass cage | — | — |
| Short Description | — | Angular contact ball bearing | — | — |
| Properties | ||||
| Contact type | Normal contact (two-point contact) | — | — | — |
| Number of rows | 1 | — | — | — |
| Ring type | One-piece inner and outer rings | — | — | — |
| Design | High-capacity D | — | — | — |
| Universal matching bearing | No | — | — | — |
| Matched arrangement | No | — | — | — |
| Matched condition (axial clearance/ preload) | Not applicable | — | — | — |
| Tolerance class | P4A | — | — | — |
| Material, bearing | Bearing steel | — | — | — |
| Coating | Without | — | — | — |
| Indicative carbon footprint for new product | 11.8 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 200 mm |
| B | — | — | — | 33 mm |
| R(Min.) | — | — | — | 2 mm |
| Bore Diameter (D) | — | 130 mm | — | — |
| R1(Min.) | — | — | — | 1 mm |
| Outside Diameter (D) | — | 200 mm | — | — |
| Basic Load Ratings : Cr | — | — | — | 147 kN |
| Width (B) | — | 33 mm | — | — |
| Basic Load Ratings : C0R | — | — | — | 125 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 131,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 5.25 kN |
| Basic Static Load Rating, Radial (C0R) | — | 142,000 N | — | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 3500 min-1 |
| Limiting Speed (Ng) | — | 5,500 1/min | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 4400 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Load Center Spread : A | — | — | — | 64.1 mm |
| Reference Speed (Nϑr) | — | 3,450 1/min | — | — |
| Da(Min.) | — | — | — | 140 mm |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 195.4 mm | — | — |
| Da(Max.) | — | — | — | 190 mm |
| Fatigue Load Limit, Radial (Cur) | — | 7,700 N | — | — |
| Ra(Max.) | — | — | — | 2 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 138.8 mm | — | — |
| Mass(Refer.) | — | — | — | 3.43 kg |
| Shoulder Diameter Inner Ring (D1) | — | 157.98 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 191.2 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 2 mm | — | — |
| Maximum Fillet Radius (Ra Max) | — | 2 mm | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 1 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 171.96 mm | — | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1 mm | — | — |
| Contact Angle (Α) | — | 30 ° | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 64.1 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.