Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 7006-CD-P4A. This table explores the base group 7006; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“7006” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF7006 CD/P4A30 × 55 × 13 mm | FAG7006-B-XL-TVP30 × 55 × 13 mm | NSK7006AW30 × 55 × 13 mm | KOYO7006 FY30 × 55 × 13 mm | NTN700630 × 55 × 13 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | NSK | KOYO | NTN |
| Designation | 7006 CD/P4A | 7006-B-XL-TVP | 7006AW | 7006 FY | 7006 |
| Product family | Super-precision angular contact ball bearings | — | Angular contact ball bearing | Single-row / With machined cage | Single row or matched pairs of angular contact ball bearings |
| Detailed type | Super-precision, high-capacity, single row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 7006 | — | — | — |
| Bore diameterd | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm |
| Outside diameterD | 55 mm | 55 mm | 55 mm | 55 mm | 55 mm |
| WidthB | 13 mm | 13 mm | 13 mm | 13 mm | 13 mm |
| Basic dynamic load ratingC | 14.3 kN | 19.9 kN | 16 kN | 18.2 kN | 15.4 kN |
| Basic static load ratingC0 | 8 kN | 13.4 kN | 10.1 kN | 10.1 kN | 9.45 kN |
| Fatigue load limitPu | 0.34 kN | 0.93 kN | — | 0.61 kN | 0.725 kN |
| Reference speednref | — | 10200 r/min | — | — | — |
| Limiting speednG | — | 16800 r/min | — | 14000 r/min | — |
| Mass≈m | 0.11 kg | 0.106 kg | 0.116 kg | 0.133 kg | 0.135 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | — | — | — | — | CN |
| Sealing | Without | Without — Not sealed | — | — | — |
| Cage | — | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Pressed steel | — | polyamide cage. |
| Bearing material | Bearing steel | — | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | -20 °C |
| Maximum operating temperatureTmax | — | 120 °C | — | — | 120 °C |
| Boundary dimensions | |||||
| Individual bearing widthB | — | — | 13 mm | — | — |
| Minimum bearing chamferr min. | — | — | 1 mm | — | — |
| Minimum secondary bearing chamferr1 min. | — | — | 0.6 mm | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Classification | |||||
| Official Category Path | — | — | — | Angular contact ball bearings - Single-row - With machined cage | — |
| Official Classification 1 | — | — | — | Angular contact ball bearings / Single-row / With machined cage | — |
| Construction | |||||
| Nominal contact angleα | — | — | 30 ° | — | — |
| Standard cage code | — | — | W | — | — |
| Optional cage codes — ratings require separate confirmation | — | — | (M), T,TYN | — | — |
| Catalogue matching scope | — | — | DB, DF, DT | — | — |
| Cage material and construction | — | — | Pressed steel | — | — |
| Construction / arrangement | — | — | Single-row angular contact bearing | — | — |
| Dimensions | |||||
| Contact angle | 15.0 ° | — | — | — | — |
| Minimum chamfer dimensionrmin | — | 1 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.039 in | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.6 mm | — | — | — |
| Minimum chamfer dimensionr1 min | — | 0.024 in | — | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 47.05 mm | — | — | — |
| Shoulder diameter on outer ring wide side faceD1 | — | 1.852 in | — | — | — |
| Caliber diameter on outer ring wide side faceD2 | — | 47.7 mm | — | — | — |
| Caliber diameter on outer ring wide side faceD2 | — | 1.878 in | — | — | — |
| Caliber diameter on outer ring small side faceD3 | — | 51.93 mm | — | — | — |
| Caliber diameter on outer ring small side faceD3 | — | 2.044 in | — | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 41.26 mm | — | — | — |
| Shoulder diameter on inner ring wide side faced1 | — | 1.624 in | — | — | — |
| Caliber diameter on inner ring wide side faced2 | — | 38.04 mm | — | — | — |
| Caliber diameter on inner ring wide side faced2 | — | 1.498 in | — | — | — |
| Distance between the apexes of the pressure conesa | — | 24.9 mm | — | — | — |
| Distance between the apexes of the pressure conesa | — | 0.98 in | — | — | — |
| Contact angleα | 15 ° | 40 ° | — | — | 30 ° |
| Dimensions and properties | |||||
| Internal diameterd | — | — | — | — | 30 mm |
| External diameterD | — | — | — | — | 55 mm |
| Bearing/Inner ring widthB | — | — | — | — | 13 mm |
| Charge load application pointa | — | — | — | — | 19 mm |
| Min fillet radiusrs | — | — | — | — | 1 mm |
| Min fillet radiusr1s | — | — | — | — | 0.6 mm |
| Radial clearance class | — | — | — | — | CN |
| Engineering — Abutment dimensions | |||||
| Diameter of shaft abutmentd a | min. 34.6 mm | — | — | — | — |
| Diameter of shaft abutmentd b | min. 34.6 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 50.4 mm | — | — | — | — |
| Diameter of housing abutmentD b | max. 53 mm | — | — | — | — |
| Radius of filletr a | max. 1 mm | — | — | — | — |
| Radius of filletr b | max. 0.3 mm | — | — | — | — |
| Position of oil nozzled n | 39.3 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| Attainable speed for grease lubrication | 32000.0 r/min | — | — | — | — |
| Attainable speed for oil-air lubrication | 48000.0 r/min | — | — | — | — |
| Ball diameterD w | 7.938 mm | — | — | — | — |
| Number of rowsi | 1 | — | — | — | — |
| Number of balls (per bearing)z | 14 | — | — | — | — |
| Reference grease quantity (per bearing)G ref | 1.6 cm³ | — | — | — | — |
| Engineering — Calculation data — Correction factors for preload calculation | |||||
| Correction factor dependent on bearing series and sizef | 1.1 | — | — | — | — |
| Correction factor dependent on contact anglef 1 | 1 | — | — | — | — |
| Correction factor, preload class Af 2A | 1 | — | — | — | — |
| Correction factor, preload class Bf 2B | 1 | — | — | — | — |
| Correction factor, preload class Cf 2C | 1.1 | — | — | — | — |
| Correction factor, preload class Df 2D | 1.1 | — | — | — | — |
| Correction factor for hybrid bearingsf HC | 1 | — | — | — | — |
| Engineering — Calculation data — Factors for equivalent bearing load calculation | |||||
| Calculation factor for equivalent loadsf 0 | 9.4 | — | — | — | — |
| Additional factors for equivalent loads | Refer to Notes 1 and 2 below | — | — | — | — |
| Engineering — Calculation data — Preload and stiffness (back-to-back, face-to-face) | |||||
| Preload, class AG A | 50 N | — | — | — | — |
| Axial stiffnes for preload A (sets of two brgs back to back or face to face) | 30 N/µm | — | — | — | — |
| Preload, class BG B | 100 N | — | — | — | — |
| Axial stiffness for preload B (sets of two brgs back-to-back or face-to-face) | 40 N/µm | — | — | — | — |
| Preload, class CG C | 200 N | — | — | — | — |
| Axial stiffness for preload C (sets of two brgs back-to-back or face-to-face) | 55 N/µm | — | — | — | — |
| Preload, class DG D | 400 N | — | — | — | — |
| Axial stiffness for preload D (sets of two brgs back-to-back or face-to-face) | 77 N/µm | — | — | — | — |
| Engineering — Dimensions | |||||
| Shoulder diameter of inner ring (large side face)d 1 | 37.7 mm | — | — | — | — |
| Shoulder diameter of inner ring (small side face)d 2 | 37.7 mm | — | — | — | — |
| Shoulder diameter of outer ring (large side face)D 1 | 47.3 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 1 mm | — | — | — | — |
| Chamfer dimensionr 3,4 | min. 0.3 mm | — | — | — | — |
| Distance from side face to pressure pointa | 12.3 mm | — | — | — | — |
| Engineering — Engineering specifications | |||||
| Universal matching bearing(s) | No | — | — | — | — |
| Load ratings | |||||
| Basic dynamic radial load ratingCr | — | — | 16000 N | — | — |
| Basic static radial load ratingC0r | — | — | 10100 N | — | — |
| Load-centre geometry | |||||
| Single-bearing effective load centrea | — | — | 18.8 mm | — | — |
| Logistics | |||||
| Product net weight | 0.11 kg | — | — | — | — |
| eClass code | 23-05-08-04 | — | — | — | — |
| UNSPSC code | 31171531 | — | — | — | — |
| Lubrication-qualified speed | |||||
| Limiting speed — grease | — | — | 11000 r/min | — | — |
| Limiting speed — oil | — | — | 14000 r/min | — | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 19,900 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 4,473.921 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 13,400 N | — | — | — |
| Basic static load rating, radialC0r | — | 3,012.59 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 930 N | — | — | — |
| Fatigue load limit, radialCur | — | 209.083 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 359034 | — | — | — |
| Official Class Key | — | — | — | 020-010-000 | — |
| Base Type | — | 7006 | — | — | — |
| Old Designation | — | ["7006B.TVP","7006-B-TVP"] | — | — | — |
| Gpsd Group | — | S03 | — | — | — |
| Product Line Id | — | 14 | — | — | — |
| X Life Marking | — | XL | — | — | — |
| SAP material number | — | 0390683580000 | — | — | — |
| Base product | — | 2305080301 | — | — | — |
| Bearing X designation | — | 7006-B-XL-TVP | — | — | — |
| Mounting Manager ID | — | 7006-B-XL-TVP | — | — | — |
| Grease application ID | — | 7006-B-XL-TVP | — | — | — |
| Mass reference | |||||
| Approximate mass | — | — | 0.116 kg | — | — |
| Mounting dimensions | |||||
| Min shoulder diameter IRda min | — | — | — | — | 35.5 mm |
| Max shoulder diameter ORDa max | — | — | — | — | 49.5 mm |
| Max OR shoulder diameterDb max | — | — | — | — | 50.5 mm |
| Max fillet radiusr1a | — | — | — | — | 0.6 mm |
| Max shaft & housing fillet radiusra max | — | — | — | — | 1 mm |
| Minimum diameter of shaft shoulderda min | — | 34.6 mm | — | — | — |
| Minimum diameter of shaft shoulderda min | — | 1.362 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 50.4 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 1.984 in | — | — | — |
| Maximum diameter of housing shoulderDb max | — | 51.8 mm | — | — | — |
| Maximum diameter of housing shoulderDb max | — | 2.039 in | — | — | — |
| Maximum fillet radius of shaftra max | — | 1 mm | — | — | — |
| Maximum fillet radius of shaftra max | — | 0.039 in | — | — | — |
| Maximum fillet radius of housingra1 max | — | 0.6 mm | — | — | — |
| Maximum fillet radius of housingra1 max | — | 0.024 in | — | — | — |
| Mounting dimensions — shown arrangement | |||||
| Minimum shaft shoulder diameterda min. | — | — | 36 mm | — | — |
| Maximum housing shoulder diameterDa max. | — | — | 49 mm | — | — |
| Maximum adjacent fillet radiusra max. | — | — | 1 mm | — | — |
| Performance | |||||
| Dynamic loadC | — | — | — | — | 15.4 kN |
| Static loadC0 | — | — | — | — | 9.45 kN |
| Fatigue limit loadCu | — | — | — | — | 0.725 kN |
| Oil lubrication limit speedN lim | — | — | — | — | 18000 r/min |
| Grease lubrication limit speedN lim | — | — | — | — | 13000 r/min |
| Min operating temperatureTmin | — | — | — | — | -20 °C |
| Max operating temperatureTmax | — | — | — | — | 120 °C |
| Product characteristics | |||||
| Catalogue construction | — | — | — | — | Angular contact ball bearing, polyamide cage. |
| Cage construction | — | — | — | — | polyamide cage. |
| Design variant | — | B | — | — | — |
| Type of SealWithout | — | Not sealed | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — | — | — |
| Product identity | |||||
| Official product category | Super-precision angular contact ball bearings | — | — | — | — |
| Official taxonomy path | /products/super-precision-bearings/angular-contact-ball-bearings | — | — | — | — |
| Structure group ID | BA1_010 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Construction | — | Angular contact ball bearing 70..-B-XL-TVP, single row, X-life, plastic cage | — | — | — |
| Short Description | — | Angular contact ball bearing | — | — | — |
| Properties | |||||
| Contact type | Normal contact (two-point contact) | — | — | — | — |
| Number of rows | 1 | — | — | — | — |
| Ring type | One-piece inner and outer rings | — | — | — | — |
| Design | High-capacity D | — | — | — | — |
| Universal matching bearing | No | — | — | — | — |
| Matched arrangement | No | — | — | — | — |
| Matched condition (axial clearance/ preload) | Not applicable | — | — | — | — |
| Tolerance class | P4A | — | — | — | — |
| Material, bearing | Bearing steel | — | — | — | — |
| Coating | Without | — | — | — | — |
| Indicative carbon footprint for new product | 0.41 kg CO 2 e | — | — | — | — |
| Technical Data | |||||
| d | — | — | — | 55 mm | — |
| B | — | — | — | 13 mm | — |
| R(Min.) | — | — | — | 1 mm | — |
| R1(Min.) | — | — | — | 0.6 mm | — |
| Basic Load Ratings : Cr | — | — | — | 18.2 kN | — |
| Bore Diameter (D) | — | 30 mm | — | — | — |
| Basic Load Ratings : C0R | — | — | — | 10.1 kN | — |
| Outside Diameter (D) | — | 55 mm | — | — | — |
| Fatigue Load Limit : Cu | — | — | — | 0.610 kN | — |
| Width (B) | — | 13 mm | — | — | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 19,900 N | — | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 14000 min-1 | — |
| Basic Static Load Rating, Radial (C0R) | — | 13,400 N | — | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 18000 min-1 | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Load Center Spread : A | — | — | — | 18.8 mm | — |
| Limiting Speed (Ng) | — | 16,800 1/min | — | — | — |
| Da(Min.) | — | — | — | 35.5 mm | — |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — | — |
| Da(Max.) | — | — | — | 49.5 mm | — |
| Reference Speed (Nϑr) | — | 10,200 1/min | — | — | — |
| Ra(Max.) | — | — | — | 1 mm | — |
| Caliber Diameter On Outer Ring Small Side Face (D3) | — | 51.93 mm | — | — | — |
| Mass(Refer.) | — | — | — | 0.133 kg | — |
| Caliber Diameter Outer Ring (D2) | — | 47.7 mm | — | — | — |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 51.8 mm | — | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 930 N | — | — | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 34.6 mm | — | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 41.26 mm | — | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 50.4 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 1 mm | — | — | — |
| Caliber Diameter Inner Ring (D1) | — | 38.04 mm | — | — | — |
| Maximum Fillet Radius (Ra Max) | — | 1 mm | — | — | — |
| Maximum Recess Radius (Ra1 Max) | — | 0.6 mm | — | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 47.05 mm | — | — | — |
| Minimum Chamfer Dimension (R1 Min) | — | 0.6 mm | — | — | — |
| Contact Angle (Α) | — | 40 ° | — | — | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 24.9 mm | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.