Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 694ZZ. This table explores the base group 694; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“694” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG694-2Z>N4 × 11 × 4 mm | NSK6944 × 11 × 4 mm | KOYO6944 × 11 × 4 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 694-2Z>N | 694 | 694 |
| Product family | — | Single row deep groove ball bearings | Extra-small, miniature ball bearings / Standard type / Open |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | 694 | — | — |
| Bore diameterd | 4 mm | 4 mm | 4 mm |
| Outside diameterD | 11 mm | 11 mm | 11 mm |
| WidthB | 4 mm | 4 mm | 4 mm |
| Basic dynamic load ratingC | 1.02 kN | 1.05 kN | 1.2 kN |
| Basic static load ratingC0 | 0.345 kN | 0.345 kN | 0.35 kN |
| Fatigue load limitPu | 0.0215 kN | — | 0.009 kN |
| Reference speednref | 53000 r/min | — | — |
| Limiting speednG | 69000 r/min | — | 54000 r/min |
| Mass≈m | 0.00175 kg | 0.0017 kg | 0.001 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — |
| Sealing | 2Z — Non-contact shield on both sides | Open | Open |
| Cage | JN — Steel sheet metal | — | — |
| Lubricant | Lubricating grease | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — |
| Boundary dimensions | |||
| Bearing width (open)B | — | 4 mm | — |
| Minimum bearing chamferr min. | — | 0.15 mm | — |
| Calculation factors | |||
| Calculation factorf0 | 12.3 | — | — |
| Capabilities & suitability | |||
| Radial load capacity | Yes | — | — |
| Axial load capacity in one direction | Yes | — | — |
| Axial load capacity in both directions | Yes | — | — |
| Lifetimelubricationfreedomfrommaintenance | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Sealedonbothsides | Yes | — | — |
| Classification | |||
| Official Category Path | — | — | Deep groove ball bearings - Extra-small, miniature ball bearings - Standard type - Open |
| Official Classification 1 | — | — | Deep groove ball bearings / Extra-small, miniature ball bearings / Standard type / Open |
| Construction | |||
| Catalogue closure construction | — | Open | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 0.15 mm | — | — |
| Minimum chamfer dimensionrmin | 0.006 in | — | — |
| Shoulder diameter outer ringD1 | 9.1 mm | — | — |
| Shoulder diameter outer ringD1 | 0.358 in | — | — |
| Caliber diameter outer ringD2 | 9.5 mm | — | — |
| Caliber diameter outer ringD2 | 0.374 in | — | — |
| Shoulder diameter inner ringd1 | 5.9 mm | — | — |
| Shoulder diameter inner ringd1 | 0.232 in | — | — |
| Load ratings | |||
| Basic dynamic radial load ratingCr | — | 1050 N | — |
| Basic static radial load ratingC0r | — | 345 N | — |
| Lubrication-qualified speed | |||
| Limiting speed with grease | — | 48000 r/min | — |
| Limiting speed with oil (open) | — | 56000 r/min | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | 1,020 N | — | — |
| Basic dynamic load rating, radialCr | 229.317 lbf | — | — |
| Basic static load rating, radialC0r | 345 N | — | — |
| Basic static load rating, radialC0r | 77.563 lbf | — | — |
| Fatigue load limit, radialCur | 21.5 N | — | — |
| Fatigue load limit, radialCur | 4.834 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 2898276 | — | — |
| Official Class Key | — | — | 010-020-010 |
| Base Type | 694 | — | — |
| Gpsd Group | S02 | — | — |
| Product Line Id | 14 | — | — |
| SAP material number | 3029852550000 | — | — |
| Base product | 2305080101 | — | — |
| Mounting dimensions | |||
| Minimum shaft shoulder diameter (open)da min. | — | 5.2 mm | — |
| Maximum adjacent fillet radiusra max. | — | 0.15 mm | — |
| Maximum housing shoulder diameter (open)Da max. | — | 9.8 mm | — |
| Minimum diameter shaft shoulderda min | 4.8 mm | — | — |
| Minimum diameter shaft shoulderda min | 0.189 in | — | — |
| Maximum diameter of housing shoulderDa max | 10.2 mm | — | — |
| Maximum diameter of housing shoulderDa max | 0.402 in | — | — |
| Maximum fillet radiusra max | 0.15 mm | — | — |
| Maximum fillet radiusra max | 0.006 in | — | — |
| Product characteristics | |||
| Version code>N | Not marked on bearing | — | — |
| Type of Seal2Z | Non-contact shield on both sides | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationSN | Rings dimensional stabilized up to 120° | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — |
| Bore typeZ | Cylindrical | — | — |
| Product Identity | |||
| Construction | Deep groove ball bearing 69..-2Z, single row, shields, steel sheet metal cage | — | — |
| Short Description | Deep groove ball bearing | — | — |
| Reference mass | |||
| Approximate catalogue mass (open) | — | 1.7 g | — |
| Technical Data | |||
| d | — | — | 11 mm |
| B | — | — | 4 mm |
| Bore Diameter (D) | 4 mm | — | — |
| R(Min.) | — | — | 0.15 mm |
| Outside Diameter (D) | 11 mm | — | — |
| Basic Load Ratings : Cr | — | — | 1.20 kN |
| Width (B) | 4 mm | — | — |
| Basic Load Ratings : C0R | — | — | 0.35 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 1,020 N | — | — |
| Fatigue Load Limit : Cu | — | — | 0.009 kN |
| Basic Static Load Rating, Radial (C0R) | 345 N | — | — |
| Factor : F0 | — | — | 12.4 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 54000 min-1 |
| Limiting Speed (Ng) | 69,000 1/min | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 65000 min-1 |
| Operating Temperature Max. (Tmax) | 120 °C | — | — |
| Da(Min.) | — | — | 5.2 mm |
| Reference Speed (Nϑr) | 53,000 1/min | — | — |
| Da(Max.) | — | — | 9.8 mm |
| Calculation Factor (F0) | 12.3 | — | — |
| Ra(Max.) | — | — | 0.15 mm |
| Fatigue Load Limit, Radial (Cur) | 21.5 N | — | — |
| Mass(Refer.) | — | — | 1.8 g |
| Minimum Diameter Shaft Shoulder (Da Min) | 4.8 mm | — | — |
| Shoulder Diameter Inner Ring (D1) | 5.9 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 10.2 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 0.15 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 0.15 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | 9.1 mm | — | — |
| Caliber Diameter Outer Ring (D1) | 9.5 mm | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 120 °C | — | — |
| Operating temperature max.Tmax | 248 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.