Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 63800ZZ. This table explores the base group 63800; it does not preserve or approve every requested suffix. Search your complete marking first →
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
“63800” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Brand differences at a glance
| Parameter | SKF63800-2ZDeep groove ball bearing with seals or shields | EZO6380010 × 19 × 7 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | EZO |
| Designation | 63800-2Z | 63800 |
| Product family | Deep groove ball bearings | Thin-Section Ball Bearing |
| Detailed type | Deep groove ball bearing with seals or shields | Deep groove ball bearings |
| Bore diameterd | — | 10 mm |
| Outside diameterD | — | 19 mm |
| WidthB | 7 mm | 7 mm |
| Basic dynamic load ratingC | 1.72 kN | 1.72 kN |
| Basic static load ratingC0 | 0.83 kN | 0.84 kN |
| Reference speednref | 80000 r/min | — |
| Limiting speednG | 38000 r/min | — |
| Mass≈m | 0.0069 kg | 0.00675 kg |
| Internal clearance | CN | — |
| Sealing | Shield on both sides | Open (no closure suffix in this catalogue marking) |
| Bearing material | Bearing steel | High-carbon chromium bearing steel |
| Lubricant | Grease | — |
| Boundary dimensions | ||
| Outer diameterD | — | 19 mm |
| Outer diameterD | — | 0.748 inch |
| Inner ring widthB | — | 7 mm |
| Inner ring widthB | — | 0.2756 inch |
| Outer ring widthC | — | 7 mm |
| Outer ring widthC | — | 0.2756 inch |
| Inner ring chamfer dimensionr si min | — | 0.3 mm |
| Inner ring chamfer dimensionr si min | — | 0.0118 inch |
| Outer ring chamfer dimensionr se min | — | 0.3 mm |
| Outer ring chamfer dimensionr se min | — | 0.0118 inch |
| Construction | ||
| Closure interpretation | — | Open (no closure suffix in this catalogue marking) |
| Material interpretation | — | High-carbon chromium bearing steel |
| Logistics | ||
| Product net weight | 0.0069 kg | — |
| eClass code | 23-05-08-01 | — |
| UNSPSC code | 31171504 | — |
| Lubrication-qualified speed | ||
| Catalogue limiting speed (grease) | — | 34000 r/min |
| Catalogue limiting speed (oil) | — | 40000 r/min |
| Mounting dimensions | ||
| Adjacent mounting dimension (da min)da min | — | 17.5 mm |
| Adjacent mounting dimension (da min)da min | — | 0.689 inch |
| Adjacent mounting dimension (da max)da max | — | 17.5 mm |
| Adjacent mounting dimension (da max)da max | — | 0.689 inch |
| Adjacent mounting dimension (r asi max)r asi max | — | 0.3 mm |
| Adjacent mounting dimension (r asi max)r asi max | — | 0.0118 inch |
| Adjacent mounting dimension (r ase max)r ase max | — | 0.3 mm |
| Adjacent mounting dimension (r ase max)r ase max | — | 0.0118 inch |
| Product identity | ||
| Official product category | Deep groove ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — |
| Structure group ID | BB1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Properties | ||
| Filling slots | Without | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Matched arrangement | No | — |
| Radial internal clearance | CN | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Sealing type | Non-contact | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 0.03 kg CO 2 e | — |
| Reference mass | ||
| Reference mass | — | 6.75 g |
| Rolling elements | ||
| Ball diameterDw | — | 2.381 mm |
| Ball quantityZ | — | 10 |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.