Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 6352-M-C3. This table explores the base group 6352; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“6352” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG6352-M-C3260 × 540 × 102 mm | KOYO6352260 × 540 × 102 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 6352-M-C3 | 6352 |
| Product family | — | Single-row / Open type |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings |
| Series | 6352 | — |
| Bore diameterd | 260 mm | 260 mm |
| Outside diameterD | 540 mm | 540 mm |
| WidthB | 102 mm | 102 mm |
| Basic dynamic load ratingC | 520 kN | 663 kN |
| Basic static load ratingC0 | 720 kN | 741 kN |
| Fatigue load limitPu | 25.5 kN | 32.4 kN |
| Reference speednref | 1650 r/min | — |
| Limiting speednG | 2080 r/min | 990 r/min |
| Mass≈m | 117 kg | 116 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | — |
| Sealing | Without — Not sealed | Open |
| Cage | M — Solid brass cage, rolling element guided | — |
| Lubricant | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation factors | ||
| Calculation factorf0 | 14.2 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Classification | ||
| Official Category Path | — | Deep groove ball bearings - Single-row - Open type |
| Official Classification 1 | — | Deep groove ball bearings / Single-row / Open type |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 6 mm | — |
| Minimum chamfer dimensionrmin | 0.236 in | — |
| Shoulder diameter outer ringD1 | 446.1 mm | — |
| Shoulder diameter outer ringD1 | 17.563 in | — |
| Shoulder diameter inner ringd1 | 355 mm | — |
| Shoulder diameter inner ringd1 | 13.976 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 520,000 N | — |
| Basic dynamic load rating, radialCr | 116,906.475 lbf | — |
| Basic static load rating, radialC0r | 720,000 N | — |
| Basic static load rating, radialC0r | 161,870.504 lbf | — |
| Fatigue load limit, radialCur | 25,500 N | — |
| Fatigue load limit, radialCur | 5,732.914 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 352288 | — |
| Official Class Key | — | 010-010-010 |
| Base Type | 6352 | — |
| Old Designation | ["6352M.C3"] | — |
| Gpsd Group | S02 | — |
| Product Line Id | 14 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0384526500030 | — |
| Base product | 2305080101 | — |
| Bearing X designation | 6352-M-C3 | — |
| Mounting Manager ID | 6352-M-C3 | — |
| Grease application ID | 6352-M-C3 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 286 mm | — |
| Minimum diameter shaft shoulderda min | 11.26 in | — |
| Maximum diameter of housing shoulderDa max | 514 mm | — |
| Maximum diameter of housing shoulderDa max | 20.236 in | — |
| Maximum fillet radiusra max | 5 mm | — |
| Maximum fillet radiusra max | 0.197 in | — |
| Product characteristics | ||
| Type of SealWithout | Not sealed | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS1 | Rings dimensional stabilized up to 200° | — |
| Radial internal clearanceC3 (Group 3) | Internal clearance larger than CN | — |
| Bore typeZ | Cylindrical | — |
| Product Identity | ||
| Construction | Deep groove ball bearing 63..-M, single row, solid brass cage | — |
| Short Description | Deep groove ball bearing | — |
| Technical Data | ||
| d | — | 540 mm |
| B | — | 102 mm |
| R(Min.) | — | 6 mm |
| Basic Load Ratings : Cr | — | 663 kN |
| Bore Diameter (D) | 260 mm | — |
| Basic Load Ratings : C0R | — | 741 kN |
| Outside Diameter (D) | 540 mm | — |
| Fatigue Load Limit : Cu | — | 32.4 kN |
| Width (B) | 102 mm | — |
| Factor : F0 | — | 14.2 |
| Basic Dynamic Load Rating, Radial (Cr) | 520,000 N | — |
| Limiting Speeds(Grease Lub.) | — | 990 min-1 |
| Basic Static Load Rating, Radial (C0R) | 720,000 N | — |
| Limiting Speeds(Oil Lub.) | — | 1200 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Da(Min.) | — | 284 mm |
| Limiting Speed (Ng) | 2,080 1/min | — |
| Da(Max.) | — | 516 mm |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Ra(Max.) | — | 5 mm |
| Reference Speed (Nϑr) | 1,650 1/min | — |
| Mass(Refer.) | — | 116 kg |
| Calculation Factor (F0) | 14.2 | — |
| Fatigue Load Limit, Radial (Cur) | 25,500 N | — |
| Minimum Diameter Shaft Shoulder (Da Min) | 286 mm | — |
| Shoulder Diameter Inner Ring (D1) | 355 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 514 mm | — |
| Minimum Chamfer Dimension (Rmin) | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | 5 mm | — |
| Shoulder Diameter Outer Ring (D1) | 446.1 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.