Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 6334-HC5C3PS0VA970. This table explores the base group 6334; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“6334” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF6334170 × 360 × 72 mm | FAG6334-G170 × 360 × 72 mm | NSK6334170 × 360 × 72 mm | KOYO6334170 × 360 × 72 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | 6334 | 6334-G | 6334 | 6334 |
| Product family | Deep groove ball bearings | — | Single row deep groove ball bearings | Single-row / Open type |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 6334 | — | — |
| Bore diameterd | 170 mm | 170 mm | 170 mm | 170 mm |
| Outside diameterD | 360 mm | 360 mm | 360 mm | 360 mm |
| WidthB | 72 mm | 72 mm | 72 mm | 72 mm |
| Basic dynamic load ratingC | 312 kN | 325 kN | 360 kN | 408 kN |
| Basic static load ratingC0 | 340 kN | 410 kN | 355 kN | 355 kN |
| Fatigue load limitPu | 8.8 kN | 13.2 kN | — | 20.5 kN |
| Reference speednref | 3800 r/min | 2550 r/min | — | — |
| Limiting speednG | 2400 r/min | 2500 r/min | — | 1700 r/min |
| Mass≈m | 30.8 kg | 32.2 kg | 36.6 kg | 38.6 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | Without — Not sealed | Open | Open |
| Cage | Sheet metal | JN — Steel sheet metal | — | — |
| Bearing material | Bearing steel | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 72 mm | — |
| Minimum bearing chamferr min. | — | — | 4 mm | — |
| Calculation factors | ||||
| Calculation factorf0 | — | 19.4 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Axial load capacity in both directions | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Largebearing | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Deep groove ball bearings - Single-row - Open type |
| Official Classification 1 | — | — | — | Deep groove ball bearings / Single-row / Open type |
| Construction | ||||
| Catalogue closure construction | — | — | Open | — |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — |
| Shoulder diameter outer ringD1 | — | 296.3 mm | — | — |
| Shoulder diameter outer ringD1 | — | 11.665 in | — | — |
| Shoulder diameter inner ringd1 | — | 235 mm | — | — |
| Shoulder diameter inner ringd1 | — | 9.252 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | min. 187 mm | — | — | — |
| Diameter of housing abutmentD a | max. 343 mm | — | — | — |
| Radius of shaft or housing filletr a | max. 3 mm | — | — | — |
| Engineering — Calculation data | ||||
| Minimum load factork r | 0.03 | — | — | — |
| Calculation factorf 0 | 14 | — | — | — |
| Engineering — Dimensions | ||||
| Deviation limits of mid-range bore diametert Δdmp | -0.025 to 0 mm | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.04 to 0 mm | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.25 to 0 mm | — | — | — |
| Shoulder diameterd 1 | ≈ 298.2 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — |
| Engineering — Tolerances of run-out | ||||
| Range of section height at inner ring of assembled bearingt Kia | 30 µm | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 70 µm | — | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — | — |
| Load ratings | ||||
| Basic dynamic radial load ratingCr | — | — | 360000 N | — |
| Basic static radial load ratingC0r | — | — | 355000 N | — |
| Equivalent-load calculation factorf0 | — | — | 13.6 | — |
| Logistics | ||||
| Product net weight | 30.8 kg | — | — | — |
| eClass code | 23-05-08-01 | — | — | — |
| UNSPSC code | 31171504 | — | — | — |
| Lubrication-qualified speed | ||||
| Limiting speed with grease | — | — | 1600 r/min | — |
| Limiting speed with oil (open bearing) | — | — | 2000 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 325,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 73,066.547 lbf | — | — |
| Basic static load rating, radialC0r | — | 410,000 N | — | — |
| Basic static load rating, radialC0r | — | 92,176.259 lbf | — | — |
| Fatigue load limit, radialCur | — | 13,200 N | — | — |
| Fatigue load limit, radialCur | — | 2,967.626 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 1794468 | — | — |
| Official Class Key | — | — | — | 010-010-010 |
| Base Type | — | 6334 | — | — |
| Product Line Id | — | 14 | — | — |
| Base product | — | 2305080101 | — | — |
| Bearing X designation | — | 6334-G | — | — |
| Mounting Manager ID | — | 6334-G | — | — |
| Mounting dimensions | ||||
| Minimum shaft shoulder diameterda min. | — | — | 186 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | 344 mm | — |
| Maximum shaft or housing fillet radiusra max. | — | — | 3 mm | — |
| Minimum diameter shaft shoulderda min | — | 187 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 7.362 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 343 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 13.504 in | — | — |
| Maximum fillet radiusra max | — | 3 mm | — | — |
| Maximum fillet radiusra max | — | 0.118 in | — | — |
| Product characteristics | ||||
| Changed internal designG | — | Generator bearing | — | — |
| Type of SealWithout | — | Not sealed | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Bore typeZ | — | Cylindrical | — | — |
| Product identity | ||||
| Official product category | Deep groove ball bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — | — |
| Structure group ID | BB1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | Yes | — | — | — |
| Product Identity | ||||
| Construction | — | Deep groove ball bearing 63..-G, single row, generator bearing, steel sheet metal cage | — | — |
| Short Description | — | Deep groove ball bearing | — | — |
| Properties | ||||
| Filling slots | Without | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Matched arrangement | No | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Material, bearing | Bearing steel | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — |
| Indicative carbon footprint for new product | 114.0 kg CO 2 e | — | — | — |
| Indicative carbon footprint for remanufactured product | 37.9 kg CO 2 e | — | — | — |
| Reference mass | ||||
| Approximate catalogue mass (open reference) | — | — | 36.6 kg | — |
| Technical Data | ||||
| d | — | — | — | 360 mm |
| Bore Diameter (D) | — | 170 mm | — | — |
| B | — | — | — | 72 mm |
| Outside Diameter (D) | — | 360 mm | — | — |
| R(Min.) | — | — | — | 4 mm |
| Width (B) | — | 72 mm | — | — |
| Basic Load Ratings : Cr | — | — | — | 408 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 325,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | 355 kN |
| Basic Static Load Rating, Radial (C0R) | — | 410,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 20.5 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Factor : F0 | — | — | — | 13.6 |
| Limiting Speed (Ng) | — | 2,500 1/min | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 1700 min-1 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2000 min-1 |
| Reference Speed (Nϑr) | — | 2,550 1/min | — | — |
| Da(Min.) | — | — | — | 186 mm |
| Calculation Factor (F0) | — | 19.4 | — | — |
| Da(Max.) | — | — | — | 344 mm |
| Fatigue Load Limit, Radial (Cur) | — | 13,200 N | — | — |
| Ra(Max.) | — | — | — | 3 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 187 mm | — | — |
| Mass(Refer.) | — | — | — | 38.6 kg |
| Shoulder Diameter Inner Ring (D1) | — | 235 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 343 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 296.3 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.