Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“6332” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF6332160 × 340 × 68 mm | FAG6332-G160 × 340 × 68 mm | TIMKEN6332M160 × 340 × 68 mm | NSK6332160 × 340 × 68 mm | KOYO6332160 × 340 × 68 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | 6332 | 6332-G | 6332M | 6332 | 6332 |
| Product family | Deep groove ball bearings | — | Radial Deep-Groove Ball | Single row deep groove ball bearings | Single-row / Open type |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 6332 | 6300 | — | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 340 mm | 340 mm | 340 mm | 340 mm | 340 mm |
| WidthB | 68 mm | 68 mm | 68 mm | 68 mm | 68 mm |
| Basic dynamic load ratingC | 276 kN | 330 kN | 301 kN | 305 kN | 347 kN |
| Basic static load ratingC0 | 285 kN | 405 kN | 316 kN | 287 kN | 286 kN |
| Fatigue load limitPu | 7.65 kN | 13.3 kN | — | — | 16.4 kN |
| Reference speednref | 4000 r/min | 2700 r/min | — | — | — |
| Limiting speednG | 2600 r/min | 2650 r/min | — | — | 1800 r/min |
| Mass≈m | 26.2 kg | 27 kg | 32.9 kg | 26.2 kg | 29 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without | Without — Not sealed | Open | Open | Open |
| Cage | Sheet metal | JN — Steel sheet metal | Brass cage | — | — |
| Bearing material | Bearing steel | — | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 68 mm | — |
| Minimum bearing chamferr min. | — | — | — | 4 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 0.00 | — | — |
| Y2 Factor | — | — | 0.00 | — | — |
| Y0 Factor | — | — | 0.50 | — | — |
| E Factor | — | — | 0.00 | — | — |
| Cg Factor | — | — | 0.0921 | — | — |
| Calculation factors | |||||
| Calculation factorf0 | — | 19.2 | — | — | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Axial load capacity in both directions | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Largebearing | — | Yes | — | — | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Deep groove ball bearings - Single-row - Open type |
| Official Classification 1 | — | — | — | — | Deep groove ball bearings / Single-row / Open type |
| Construction | |||||
| Catalogue closure construction | — | — | — | Open | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — | — |
| Shoulder diameter outer ringD1 | — | 281.2 mm | — | — | — |
| Shoulder diameter outer ringD1 | — | 11.071 in | — | — | — |
| Shoulder diameter inner ringd1 | — | 220 mm | — | — | — |
| Shoulder diameter inner ringd1 | — | 8.661 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of shaft abutmentd a | min. 177 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 323 mm | — | — | — | — |
| Radius of shaft or housing filletr a | max. 3 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| Minimum load factork r | 0.03 | — | — | — | — |
| Calculation factorf 0 | 13.9 | — | — | — | — |
| Engineering — Dimensions | |||||
| Deviation limits of mid-range bore diametert Δdmp | -0.025 to 0 mm | — | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.04 to 0 mm | — | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.25 to 0 mm | — | — | — | — |
| Shoulder diameterd 1 | ≈ 280.7 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — | — |
| Engineering — Tolerances of run-out | |||||
| Range of section height at inner ring of assembled bearingt Kia | 30 µm | — | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 70 µm | — | — | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — | — | — |
| Load ratings | |||||
| Basic dynamic radial load ratingCr | — | — | — | 305000 N | — |
| Basic static radial load ratingC0r | — | — | — | 287000 N | — |
| Equivalent-load calculation factorf0 | — | — | — | 13.9 | — |
| Logistics | |||||
| Product net weight | 26.2 kg | — | — | — | — |
| eClass code | 23-05-08-01 | — | — | — | — |
| UNSPSC code | 31171504 | — | — | — | — |
| Lubrication-qualified speed | |||||
| Limiting speed with grease | — | — | — | 1700 r/min | — |
| Limiting speed with oil (open bearing) | — | — | — | 2000 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 330,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 74,190.647 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 405,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 91,052.158 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 13,300 N | — | — | — |
| Fatigue load limit, radialCur | — | 2,990.108 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 1794465 | — | — | — |
| Material Number | — | — | 000000000190102690 | — | — |
| Official Class Key | — | — | — | — | 010-010-010 |
| Base Type | — | 6332 | — | — | — |
| World Assembly Part Number | — | — | 6332M | — | — |
| Product Line Id | — | 14 | — | — | — |
| Upc | — | — | 0013992695277 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.947 | — | — |
| Base product | — | 2305080101 | — | — | — |
| Bearing X designation | — | 6332-G | — | — | — |
| Mounting Manager ID | — | 6332-G | — | — | — |
| Mounting dimensions | |||||
| Minimum shaft shoulder diameterda min. | — | — | — | 176 mm | — |
| Maximum shaft shoulder diameterda max. | — | — | — | 215.5 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 324 mm | — |
| Maximum shaft or housing fillet radiusra max. | — | — | — | 3 mm | — |
| Minimum diameter shaft shoulderda min | — | 177 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 6.969 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 323 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 12.717 in | — | — | — |
| Maximum fillet radiusra max | — | 3 mm | — | — | — |
| Maximum fillet radiusra max | — | 0.118 in | — | — | — |
| Product characteristics | |||||
| Changed internal designG | — | Generator bearing | — | — | — |
| Type of SealWithout | — | Not sealed | — | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Bore typeZ | — | Cylindrical | — | — | — |
| Product identity | |||||
| Official product category | Deep groove ball bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — | — | — |
| Structure group ID | BB1_001_101 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | Yes | — | — | — | — |
| Product Identity | |||||
| Construction | — | Deep groove ball bearing 63..-G, single row, generator bearing, steel sheet metal cage | Single Row Deep Groove Ball Bearing | Imperial Series | 6.2992 in Bore | 13.3858 in OD | 2.6772 in Width | Open | Cylindrical Bore | Brass Cage | C0 Clearance | ISO P0 Tolerance | — | — |
| Type Description | — | — | Radial Deep-Groove Ball | — | — |
| Short Description | — | Deep groove ball bearing | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Filling slots | Without | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — |
| Matched arrangement | No | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Material, bearing | Bearing steel | — | — | — | — |
| Coating | Without | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — | — |
| Indicative carbon footprint for new product | 97.1 kg CO 2 e | — | — | — | — |
| Indicative carbon footprint for remanufactured product | 32.3 kg CO 2 e | — | — | — | — |
| Reference mass | |||||
| Approximate catalogue mass (open reference) | — | — | — | 26.2 kg | — |
| Technical Data | |||||
| d | — | — | — | — | 340 mm |
| Bore Diameter (D) | — | 160 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| B | — | — | — | — | 68 mm |
| Outside Diameter (D) | — | 340 mm | — | — | — |
| Radial Rating | — | — | 0 N | — | — |
| R(Min.) | — | — | — | — | 4 mm |
| Width (B) | — | 68 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 347 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 330,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 301,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 286 kN |
| Basic Static Load Rating, Radial (C0R) | — | 405,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 16.4 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Factor : F0 | — | — | — | — | 13.9 |
| Limiting Speed (Ng) | — | 2,650 1/min | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1800 min-1 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — | — |
| Static Radial Rating C0 | — | — | 316,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 2200 min-1 |
| Reference Speed (Nϑr) | — | 2,700 1/min | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| Da(Min.) | — | — | — | — | 176 mm |
| Calculation Factor (F0) | — | 19.2 | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| Da(Max.) | — | — | — | — | 324 mm |
| Fatigue Load Limit, Radial (Cur) | — | 13,300 N | — | — | — |
| Ra(Max.) | — | — | — | — | 3 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 177 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 29.0 kg |
| Shoulder Diameter Inner Ring (D1) | — | 220 mm | — | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 323 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 281.2 mm | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.