Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“6252” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF6252 M260 × 480 × 80 mm | FAG6252-M260 × 480 × 80 mm | TIMKEN6252M-C3260 × 480 × 80 mm | KOYO6252260 × 480 × 80 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | TIMKEN | KOYO |
| Designation | 6252 M | 6252-M | 6252M-C3 | 6252 |
| Product family | Deep groove ball bearings | — | Radial Deep-Groove Ball | Single-row / Open type |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 6252 | 6252 | — |
| Bore diameterd | 260 mm | 260 mm | 260 mm | 260 mm |
| Outside diameterD | 480 mm | 480 mm | 480 mm | 480 mm |
| WidthB | 80 mm | 80 mm | 80 mm | 80 mm |
| Basic dynamic load ratingC | 390 kN | 410 kN | 391 kN | 502 kN |
| Basic static load ratingC0 | 530 kN | 560 kN | 534 kN | 541 kN |
| Fatigue load limitPu | 11.8 kN | 19.7 kN | — | 22.2 kN |
| Reference speednref | 2600 r/min | 1820 r/min | — | — |
| Limiting speednG | 2400 r/min | 2370 r/min | — | 1100 r/min |
| Mass≈m | 67.5 kg | 68.4 kg | 66 kg | 68.2 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | Without — Not sealed | Open | Open |
| Cage | Machined brass | M — Solid brass cage, rolling element guided | Brass cage | — |
| Bearing material | Bearing steel | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — |
| Calculation Factors | ||||
| K Factor | — | — | 0.00 | — |
| Y1 Factor | — | — | 0.00 | — |
| Y2 Factor | — | — | 0.00 | — |
| Y0 Factor | — | — | 0.50 | — |
| E Factor | — | — | 0.00 | — |
| Cg Factor | — | — | 0.1202 | — |
| Calculation factors | ||||
| Calculation factorf0 | — | 15.1 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Axial load capacity in both directions | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Largebearing | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Deep groove ball bearings - Single-row - Open type |
| Official Classification 1 | — | — | — | Deep groove ball bearings / Single-row / Open type |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 5 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — | — |
| Shoulder diameter outer ringD1 | — | 402.55 mm | — | — |
| Shoulder diameter outer ringD1 | — | 15.848 in | — | — |
| Shoulder diameter inner ringd1 | — | 337.1 mm | — | — |
| Shoulder diameter inner ringd1 | — | 13.272 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | min. 280 mm | — | — | — |
| Diameter of housing abutmentD a | max. 460 mm | — | — | — |
| Radius of shaft or housing filletr a | max. 4 mm | — | — | — |
| Engineering — Calculation data | ||||
| Minimum load factork r | 0.03 | — | — | — |
| Calculation factorf 0 | 15.3 | — | — | — |
| Engineering — Dimensions | ||||
| Deviation limits of mid-range bore diametert Δdmp | -0.035 to 0 mm | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.045 to 0 mm | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.35 to 0 mm | — | — | — |
| Shoulder diameterd 1 | ≈ 402.4 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 5 mm | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — |
| Engineering — Tolerances of run-out | ||||
| Range of section height at inner ring of assembled bearingt Kia | 50 µm | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 80 µm | — | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — | — |
| Logistics | ||||
| Product net weight | 67.5 kg | — | — | — |
| eClass code | 23-05-08-01 | — | — | — |
| UNSPSC code | 31171504 | — | — | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 410,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 92,176.259 lbf | — | — |
| Basic static load rating, radialC0r | — | 560,000 N | — | — |
| Basic static load rating, radialC0r | — | 125,899.281 lbf | — | — |
| Fatigue load limit, radialCur | — | 19,700 N | — | — |
| Fatigue load limit, radialCur | — | 4,428.957 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 351628 | — | — |
| Material Number | — | — | 000000000101753171 | — |
| Official Class Key | — | — | — | 010-010-010 |
| Base Type | — | 6252 | — | — |
| World Assembly Part Number | — | — | 6252MB-C3 | — |
| Old Designation | — | ["6252M"] | — | — |
| Upc | — | — | 0013992160737 | — |
| Gpsd Group | — | S02 | — | — |
| Product Line Id | — | 14 | — | — |
| X Life Marking | — | n.r. | — | — |
| Official Source System | — | — | CORE BP - DS DF | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.94 | — |
| SAP material number | — | 0191068900000 | — | — |
| Base product | — | 2305080101 | — | — |
| Bearing X designation | — | 6252-M | — | — |
| Mounting Manager ID | — | 6252-M | — | — |
| Grease application ID | — | 6252-M | — | — |
| Mounting dimensions | ||||
| Minimum diameter shaft shoulderda min | — | 280 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 11.024 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 460 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 18.11 in | — | — |
| Maximum fillet radiusra max | — | 4 mm | — | — |
| Maximum fillet radiusra max | — | 0.157 in | — | — |
| Product characteristics | ||||
| Type of SealWithout | — | Not sealed | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Bore typeZ | — | Cylindrical | — | — |
| Product identity | ||||
| Official product category | Deep groove ball bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — | — |
| Structure group ID | BB1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | Yes | — | — | — |
| Product Identity | ||||
| Type Description | — | — | Radial Deep-Groove Ball | — |
| Construction | — | Deep groove ball bearing 62..-M, single row, solid brass cage | Single Row Deep Groove Ball Bearing | Imperial Series | 10.2362 in Bore | 18.8976 in OD | 3.1496 in Width | Open | Cylindrical Bore | Brass Cage | C3 Clearance | ISO P0 Tolerance | — |
| Number Of Rows | 1 | — | 1 | — |
| Tapered Bore | — | — | N | — |
| Short Description | — | Deep groove ball bearing | — | — |
| Properties | ||||
| Filling slots | Without | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Matched arrangement | No | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Material, bearing | Bearing steel | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — |
| Indicative carbon footprint for new product | 250.0 kg CO 2 e | — | — | — |
| Indicative carbon footprint for remanufactured product | 83.0 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 480 mm |
| Overall Width | — | — | 0.000 mm | — |
| B | — | — | — | 80 mm |
| Radial Rating | — | — | 0 N | — |
| R(Min.) | — | — | — | 5 mm |
| Axial Rating | — | — | 0 N | — |
| Basic Load Ratings : Cr | — | — | — | 502 kN |
| Bore Diameter (D) | — | 260 mm | — | — |
| Dynamic Rating C1 | — | — | 391,000 N | — |
| Basic Load Ratings : C0R | — | — | — | 541 kN |
| Outside Diameter (D) | — | 480 mm | — | — |
| Dynamic Rating C90 | — | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | — | 22.2 kN |
| Width (B) | — | 80 mm | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — |
| Factor : F0 | — | — | — | 15.1 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 410,000 N | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 1100 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 560,000 N | — | — |
| Static Radial Rating C0 | — | — | 534,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 1300 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — |
| Da(Min.) | — | — | — | 280 mm |
| Limiting Speed (Ng) | — | 2,370 1/min | — | — |
| Static Axial Rating C0A | — | — | 0 N | — |
| Da(Max.) | — | — | — | 460 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — |
| Ra(Max.) | — | — | — | 4 mm |
| Reference Speed (Nϑr) | — | 1,820 1/min | — | — |
| Mass(Refer.) | — | — | — | 68.2 kg |
| Calculation Factor (F0) | — | 15.1 | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 19,700 N | — | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 280 mm | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 337.1 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 460 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 402.55 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.