Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“61892” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF61892 MA460 × 580 × 56 mm | FAG61892-M460 × 580 × 56 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 61892 MA | 61892-M |
| Product family | Deep groove ball bearings | — |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 61892 |
| Bore diameterd | 460 mm | 460 mm |
| Outside diameterD | 580 mm | 580 mm |
| WidthB | 56 mm | 56 mm |
| Basic dynamic load ratingC | 319 kN | 290 kN |
| Basic static load ratingC0 | 570 kN | 480 kN |
| Fatigue load limitPu | 10.6 kN | 12.3 kN |
| Reference speednref | 2000 r/min | 1170 r/min |
| Limiting speednG | 1600 r/min | 1840 r/min |
| Mass≈m | 36.2 kg | 35.4 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) |
| Internal clearance | CN | CN (Group N) — Normal internal clearance |
| Sealing | Without | Without — Not sealed |
| Cage | Machined brass | M — Solid brass cage, rolling element guided |
| Bearing material | Bearing steel | — |
| Lubricant | None | Without — Bearing not greased |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Calculation factors | ||
| Calculation factorf0 | — | 16 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 3 mm |
| Minimum chamfer dimensionrmin | — | 0.118 in |
| Shoulder diameter outer ringD1 | — | 540.85 mm |
| Shoulder diameter outer ringD1 | — | 21.293 in |
| Shoulder diameter inner ringd1 | — | 500.2 mm |
| Shoulder diameter inner ringd1 | — | 19.693 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 473 mm | — |
| Diameter of housing abutmentD a | max. 567 mm | — |
| Radius of shaft or housing filletr a | max. 2.5 mm | — |
| Engineering — Calculation data | ||
| Minimum load factork r | 0.02 | — |
| Calculation factorf 0 | 17.1 | — |
| Engineering — Dimensions | ||
| Deviation limits of mid-range bore diametert Δdmp | -0.045 to 0 mm | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.05 to 0 mm | — |
| Deviation limits of ring widtht ΔBs | -0.45 to 0 mm | — |
| Shoulder diameterd 1 | ≈ 541.63 mm | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — |
| ISO tolerance class for dimensions | Normal | — |
| Engineering — Tolerances of run-out | ||
| Range of section height at inner ring of assembled bearingt Kia | 65 µm | — |
| Range of section height at outer ring of assembled bearingt Kea | 100 µm | — |
| ISO tolerance class for geometrical tolerances | Normal | — |
| Logistics | ||
| Product net weight | 36.2 kg | — |
| eClass code | 23-05-08-01 | — |
| UNSPSC code | 31171504 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 290,000 N |
| Basic dynamic load rating, radialCr | — | 65,197.842 lbf |
| Basic static load rating, radialC0r | — | 480,000 N |
| Basic static load rating, radialC0r | — | 107,913.669 lbf |
| Fatigue load limit, radialCur | — | 12,300 N |
| Fatigue load limit, radialCur | — | 2,765.288 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 350369 |
| Base Type | — | 61892 |
| Old Designation | — | ["61892M"] |
| Gpsd Group | — | S02 |
| Product Line Id | — | 14 |
| SAP material number | — | 0167192040000 |
| Base product | — | 2305080101 |
| Bearing X designation | — | 61892-M |
| Mounting Manager ID | — | 61892-M |
| Grease application ID | — | 61892-M |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 472.4 mm |
| Minimum diameter shaft shoulderda min | — | 18.598 in |
| Maximum diameter of housing shoulderDa max | — | 567.6 mm |
| Maximum diameter of housing shoulderDa max | — | 22.346 in |
| Maximum fillet radiusra max | — | 2.5 mm |
| Maximum fillet radiusra max | — | 0.098 in |
| Product characteristics | ||
| Type of SealWithout | — | Not sealed |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance |
| Bore typeZ | — | Cylindrical |
| Product identity | ||
| Official product category | Deep groove ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — |
| Structure group ID | BB1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Deep groove ball bearing 618..-M, single row, solid brass cage |
| Short Description | — | Deep groove ball bearing |
| Properties | ||
| Filling slots | Without | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Matched arrangement | No | — |
| Radial internal clearance | CN | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 134.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 44.5 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 460 mm |
| Outside Diameter (D) | — | 580 mm |
| Width (B) | — | 56 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 290,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 480,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 1,840 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 1,170 1/min |
| Calculation Factor (F0) | — | 16 |
| Fatigue Load Limit, Radial (Cur) | — | 12,300 N |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 472.4 mm |
| Shoulder Diameter Inner Ring (D1) | — | 500.2 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 567.6 mm |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm |
| Shoulder Diameter Outer Ring (D1) | — | 540.85 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.