Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 6092-M. This table explores the base group 6092; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“6092” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG6092-M460 × 680 × 100 mm | KOYO6092460 × 680 × 100 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 6092-M | 6092 |
| Product family | — | Single-row / Open type |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings |
| Series | 6092 | — |
| Bore diameterd | 460 mm | 460 mm |
| Outside diameterD | 680 mm | 680 mm |
| WidthB | 100 mm | 100 mm |
| Basic dynamic load ratingC | 590 kN | 722 kN |
| Basic static load ratingC0 | 1070 kN | 1000 kN |
| Fatigue load limitPu | 28 kN | 30.4 kN |
| Reference speednref | 1200 r/min | — |
| Limiting speednG | 1550 r/min | 630 r/min |
| Mass≈m | 122.9 kg | 124 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Sealing | Without — Not sealed | Open |
| Cage | M — Solid brass cage, rolling element guided | — |
| Lubricant | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation factors | ||
| Calculation factorf0 | 16 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Classification | ||
| Official Category Path | — | Deep groove ball bearings - Single-row - Open type |
| Official Classification 1 | — | Deep groove ball bearings / Single-row / Open type |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 6 mm | — |
| Minimum chamfer dimensionrmin | 0.236 in | — |
| Shoulder diameter outer ringD1 | 614 mm | — |
| Shoulder diameter outer ringD1 | 24.173 in | — |
| Shoulder diameter inner ringd1 | 528.7 mm | — |
| Shoulder diameter inner ringd1 | 20.815 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 590,000 N | — |
| Basic dynamic load rating, radialCr | 132,643.885 lbf | — |
| Basic static load rating, radialC0r | 1,070,000 N | — |
| Basic static load rating, radialC0r | 240,557.554 lbf | — |
| Fatigue load limit, radialCur | 28,000 N | — |
| Fatigue load limit, radialCur | 6,294.964 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 349880 | — |
| Official Class Key | — | 010-010-010 |
| Base Type | 6092 | — |
| Old Designation | ["6092M"] | — |
| Gpsd Group | S02 | — |
| Product Line Id | 14 | — |
| SAP material number | 0190964610000 | — |
| Base product | 2305080101 | — |
| Bearing X designation | 6092-M | — |
| Mounting Manager ID | 6092-M | — |
| Grease application ID | 6092-M | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 483 mm | — |
| Minimum diameter shaft shoulderda min | 19.016 in | — |
| Maximum diameter of housing shoulderDa max | 657 mm | — |
| Maximum diameter of housing shoulderDa max | 25.866 in | — |
| Maximum fillet radiusra max | 5 mm | — |
| Maximum fillet radiusra max | 0.197 in | — |
| Product characteristics | ||
| Type of SealWithout | Not sealed | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS1 | Rings dimensional stabilized up to 200° | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Bore typeZ | Cylindrical | — |
| Product Identity | ||
| Construction | Deep groove ball bearing 60..-M, single row, solid brass cage | — |
| Short Description | Deep groove ball bearing | — |
| Technical Data | ||
| d | — | 680 mm |
| B | — | 100 mm |
| R(Min.) | — | 6 mm |
| Bore Diameter (D) | 460 mm | — |
| Basic Load Ratings : Cr | — | 722 kN |
| Outside Diameter (D) | 680 mm | — |
| Basic Load Ratings : C0R | — | 1000 kN |
| Width (B) | 100 mm | — |
| Fatigue Load Limit : Cu | — | 30.4 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 590,000 N | — |
| Factor : F0 | — | 15.8 |
| Basic Static Load Rating, Radial (C0R) | 1,070,000 N | — |
| Limiting Speeds(Grease Lub.) | — | 630 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speeds(Oil Lub.) | — | 750 min-1 |
| Limiting Speed (Ng) | 1,550 1/min | — |
| Da(Min.) | — | 484 mm |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Da(Max.) | — | 656 mm |
| Reference Speed (Nϑr) | 1,200 1/min | — |
| Ra(Max.) | — | 5 mm |
| Calculation Factor (F0) | 16 | — |
| Mass(Refer.) | — | 124 kg |
| Fatigue Load Limit, Radial (Cur) | 28,000 N | — |
| Minimum Diameter Shaft Shoulder (Da Min) | 483 mm | — |
| Shoulder Diameter Inner Ring (D1) | 528.7 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 657 mm | — |
| Minimum Chamfer Dimension (Rmin) | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | 5 mm | — |
| Shoulder Diameter Outer Ring (D1) | 614 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.