Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 6036ZZS. This table explores the base group 6036; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“6036” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF6036 M180 × 280 × 46 mm | FAG6036-M180 × 280 × 46 mm | NSK6036180 × 280 × 46 mm | KOYO6036180 × 280 × 46 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | NSK | KOYO |
| Designation | 6036 M | 6036-M | 6036 | 6036 |
| Product family | Deep groove ball bearings | — | Single row deep groove ball bearings | Single-row / Open type |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 6036 | — | — |
| Bore diameterd | 180 mm | 180 mm | 180 mm | 180 mm |
| Outside diameterD | 280 mm | 280 mm | 280 mm | 280 mm |
| WidthB | 46 mm | 46 mm | 46 mm | 46 mm |
| Basic dynamic load ratingC | 190 kN | 201 kN | 198 kN | 227 kN |
| Basic static load ratingC0 | 200 kN | 199 kN | 185 kN | 194 kN |
| Fatigue load limitPu | 5.6 kN | 8.4 kN | — | 7.15 kN |
| Reference speednref | 4800 r/min | 3300 r/min | — | — |
| Limiting speednG | 4000 r/min | 4050 r/min | — | 2200 r/min |
| Mass≈m | 10.6 kg | 10.6 kg | 8.88 kg | 10.3 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | Without — Not sealed | Open | Open |
| Cage | Machined brass | M — Solid brass cage, rolling element guided | — | — |
| Bearing material | Bearing steel | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 46 mm | — |
| Minimum bearing chamferr min. | — | — | 2.1 mm | — |
| Calculation factors | ||||
| Calculation factorf0 | — | 15.6 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Axial load capacity in both directions | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Deep groove ball bearings - Single-row - Open type |
| Official Classification 1 | — | — | — | Deep groove ball bearings / Single-row / Open type |
| Construction | ||||
| Catalogue closure construction | — | — | Open | — |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 2.1 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.083 in | — | — |
| Shoulder diameter outer ringD1 | — | 249.25 mm | — | — |
| Shoulder diameter outer ringD1 | — | 9.813 in | — | — |
| Shoulder diameter inner ringd1 | — | 211.8 mm | — | — |
| Shoulder diameter inner ringd1 | — | 8.339 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | min. 190 mm | — | — | — |
| Diameter of housing abutmentD a | max. 270 mm | — | — | — |
| Radius of shaft or housing filletr a | max. 2 mm | — | — | — |
| Engineering — Calculation data | ||||
| Minimum load factork r | 0.03 | — | — | — |
| Calculation factorf 0 | 15.6 | — | — | — |
| Engineering — Dimensions | ||||
| Deviation limits of mid-range bore diametert Δdmp | -0.025 to 0 mm | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.035 to 0 mm | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.25 to 0 mm | — | — | — |
| Shoulder diameterd 1 | ≈ 248 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 2.1 mm | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — |
| Engineering — Tolerances of run-out | ||||
| Range of section height at inner ring of assembled bearingt Kia | 30 µm | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 60 µm | — | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — | — |
| Load ratings | ||||
| Basic dynamic radial load ratingCr | — | — | 198000 N | — |
| Basic static radial load ratingC0r | — | — | 185000 N | — |
| Equivalent-load calculation factorf0 | — | — | 15.6 | — |
| Logistics | ||||
| Product net weight | 10.6 kg | — | — | — |
| eClass code | 23-05-08-01 | — | — | — |
| UNSPSC code | 31171504 | — | — | — |
| Lubrication-qualified speed | ||||
| Limiting speed with grease | — | — | 2000 r/min | — |
| Limiting speed with oil (open bearing) | — | — | 2400 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 201,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 45,188.849 lbf | — | — |
| Basic static load rating, radialC0r | — | 199,000 N | — | — |
| Basic static load rating, radialC0r | — | 44,739.209 lbf | — | — |
| Fatigue load limit, radialCur | — | 8,400 N | — | — |
| Fatigue load limit, radialCur | — | 1,888.489 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 349820 | — | — |
| Official Class Key | — | — | — | 010-010-010 |
| Base Type | — | 6036 | — | — |
| Old Designation | — | ["6036M"] | — | — |
| Gpsd Group | — | S02 | — | — |
| Product Line Id | — | 14 | — | — |
| X Life Marking | — | n.r. | — | — |
| SAP material number | — | 0167187390000 | — | — |
| Base product | — | 2305080101 | — | — |
| Bearing X designation | — | 6036-M | — | — |
| Mounting Manager ID | — | 6036-M | — | — |
| Grease application ID | — | 6036-M | — | — |
| Mounting dimensions | ||||
| Minimum shaft shoulder diameterda min. | — | — | 191 mm | — |
| Maximum shaft shoulder diameterda max. | — | — | 208 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | 269 mm | — |
| Maximum shaft or housing fillet radiusra max. | — | — | 2 mm | — |
| Minimum diameter shaft shoulderda min | — | 190.2 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 7.488 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 269.8 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 10.622 in | — | — |
| Maximum fillet radiusra max | — | 2.1 mm | — | — |
| Maximum fillet radiusra max | — | 0.083 in | — | — |
| Product characteristics | ||||
| Type of SealWithout | — | Not sealed | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Bore typeZ | — | Cylindrical | — | — |
| Product identity | ||||
| Official product category | Deep groove ball bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — | — |
| Structure group ID | BB1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Deep groove ball bearing 60..-M, single row, solid brass cage | — | — |
| Short Description | — | Deep groove ball bearing | — | — |
| Properties | ||||
| Filling slots | Without | — | — | — |
| Number of rows | 1 | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Matched arrangement | No | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Material, bearing | Bearing steel | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 39.2 kg CO 2 e | — | — | — |
| Reference mass | ||||
| Approximate catalogue mass (open reference) | — | — | 8.88 kg | — |
| Technical Data | ||||
| d | — | — | — | 280 mm |
| B | — | — | — | 46 mm |
| R(Min.) | — | — | — | 2.1 mm |
| Basic Load Ratings : Cr | — | — | — | 227 kN |
| Bore Diameter (D) | — | 180 mm | — | — |
| Basic Load Ratings : C0R | — | — | — | 194 kN |
| Outside Diameter (D) | — | 280 mm | — | — |
| Fatigue Load Limit : Cu | — | — | — | 7.15 kN |
| Width (B) | — | 46 mm | — | — |
| Factor : F0 | — | — | — | 15.8 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 201,000 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 2200 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 199,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2600 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Da(Min.) | — | — | — | 191 mm |
| Limiting Speed (Ng) | — | 4,050 1/min | — | — |
| Da(Max.) | — | — | — | 269 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — |
| Ra(Max.) | — | — | — | 2 mm |
| Reference Speed (Nϑr) | — | 3,300 1/min | — | — |
| Mass(Refer.) | — | — | — | 10.3 kg |
| Calculation Factor (F0) | — | 15.6 | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 8,400 N | — | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 190.2 mm | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 211.8 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 269.8 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm | — | — |
| Maximum Fillet Radius (Ra Max) | — | 2.1 mm | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 249.25 mm | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.