Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 54322X. This table explores the base group 54322; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“54322” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG54322-MP95 × 190 × 118.4 mm | NSK54322X95 × 190 × 118.4 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | 54322-MP | 54322X |
| Product family | — | Axial deep groove ball bearing |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 54322 | — |
| Bore diameterd | 95 mm | 95 mm |
| Outside diameterD | 190 mm | 190 mm |
| WidthB | 118.4 mm | 118.4 mm |
| Reference speednref | 3300 r/min | — |
| Limiting speednG | 1790 r/min | — |
| Mass≈m | 13.808 kg | 13.5 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | MP — Solid brass cage, rolling element guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Additional information | ||
| Seat washer | U322 | — |
| Aligning-seat geometry | ||
| Aligning-seat geometric referenceA1 | — | 47 mm |
| Spherical seat radiusR | — | 140 mm |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd2 | — | 95 mm |
| Overall outside diameterD | — | 190 mm |
| Complete assembled heightT5 | — | 118.4 mm |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 282000 N |
| Basic static axial load ratingC0a | — | 755000 N |
| Calculation factors | ||
| Minimum load factorA | 3 | — |
| Capabilities & suitability | ||
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | — | 2 mm |
| Minimum shaft-side chamferr1 min. | — | 1 mm |
| Component dimensions | ||
| Central shaft washer outside diameterd3 | — | 189.5 mm |
| Housing washer bore diameterD1 | — | 113 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | 110 mm |
| Central shaft washer thicknessB | — | 24 mm |
| Partial axial height in the assembly drawingT6 | — | 71.2 mm |
| Construction | ||
| Axial load directions | — | Both directions |
| Seat construction | — | Aligning seat |
| Radial-load support | — | Not suitable for radial load; separate radial support required |
| Dimensions | ||
| Inner diameter housing washerD1 | 113 mm | — |
| Inner diameter housing washerD1 | 4.449 in | — |
| Height shaft washerB | 24 mm | — |
| Height shaft washerB | 0.945 in | — |
| Minimum chamfer dimensionrmin | 2 mm | — |
| Minimum chamfer dimensionrmin | 0.079 in | — |
| Minimum chamfer dimensionr1 min | 1 mm | — |
| Minimum chamfer dimensionr1 min | 0.039 in | — |
| Radius spherical housing washerR | 140 mm | — |
| Radius spherical housing washerR | 5.512 in | — |
| Distance of the center pointA | 47 mm | — |
| Distance of the center pointA | 1.85 in | — |
| Height with seat washerT3 | 128 mm | — |
| Height with seat washerT3 | 5.039 in | — |
| Bore diameter seat washerD2 | 150 mm | — |
| Bore diameter seat washerD2 | 5.906 in | — |
| Outside diameter seat washerD3 | 195 mm | — |
| Outside diameter seat washerD3 | 7.677 in | — |
| Height seat washerC | 20.5 mm | — |
| Height seat washerC | 0.807 in | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 850 r/min |
| Limiting speed — oil | — | 1300 r/min |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | 95 mm | — |
| Inner diameter shaft washerd | 3.74 in | — |
| Outer diameter housing washerD | 190 mm | — |
| Outer diameter housing washerD | 7.48 in | — |
| Basic dynamic load rating, axialCa | 280,000 N | — |
| Basic dynamic load rating, axialCa | 62,949.64 lbf | — |
| Basic static load rating, axialC0a | 740,000 N | — |
| Basic static load rating, axialC0a | 166,366.906 lbf | — |
| Fatigue load limit, axialCua | 28,000 N | — |
| Fatigue load limit, axialCua | 6,294.964 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 395056 | — |
| Base Type | 54322 | — |
| Old Designation | ["54322MP"] | — |
| Gpsd Group | S03 | — |
| Product Line Id | 14 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0190754640000 | — |
| Base product | 2305100102 | — |
| Bearing X designation | 54322-MP | — |
| Mounting Manager ID | 54322-MP | — |
| Grease application ID | 54322-MP | — |
| Mass reference | ||
| Approximate assembly mass | — | 13.5 kg |
| Mounting dimensions | ||
| Maximum housing abutment diameterDa max. | — | 150 mm |
| Maximum housing-side fillet radiusra max. | — | 2 mm |
| Maximum shaft-side fillet radiusrb max. | — | 1 mm |
| Maximum diameter shaft shoulderda max | 110 mm | — |
| Maximum diameter shaft shoulderda max | 4.331 in | — |
| Maximum diameter of housing shoulderDa max | 150 mm | — |
| Maximum diameter of housing shoulderDa max | 5.906 in | — |
| Maximum filled radiusra max | 2 mm | — |
| Maximum filled radiusra max | 0.079 in | — |
| Maximum filled radiusra1 max | 1 mm | — |
| Maximum filled radiusra1 max | 0.039 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — |
| Product Identity | ||
| Construction | Axial deep groove ball bearing 543..-MP, double direction, with spherical housing washer, solid brass cage | — |
| Short Description | Axial deep groove ball bearing | — |
| Technical Data | ||
| Inner Diameter Shaft Washer (D) | 95 mm | — |
| Outside Diameter (D) | 190 mm | — |
| Height (T2) | 118.4 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | 280,000 N | — |
| Basic Static Load Rating, Axial (C0A) | 740,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed (Ng) | 1,790 1/min | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Reference Speed (Nϑr) | 3,300 1/min | — |
| Bore Diameter Seat Washer (D2) | 150 mm | — |
| Height Seat Washer (C) | 20.5 mm | — |
| Height Shaft Washer (B) | 24 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 110 mm | — |
| Minimum Load Factor (A) | 3 | — |
| Outside Diameter Seat Washer (D3) | 195 mm | — |
| Distance Of The Center Point (A) | 47 mm | — |
| Height With Seat Washer (T3) | 128 mm | — |
| Bore Diameter Housing Washer (D1) | 113 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 150 mm | — |
| Minimum Chamfer Dimension (Rmin) | 2 mm | — |
| Maximum Fillet Radius (Ra Max) | 2 mm | — |
| Maximum Recess Radius (Ra1 Max) | 1 mm | — |
| Radius Spherical Housing Washer (R) | 140 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 1 mm | — |
| Fatigue Load Limit, Axial (Cua) | 28,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.