Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 54307U. This table explores the base group 54307; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“54307” across 3 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF5430730 × 68 × mm | FAG5430730 × 68 × 47.2 mm | NSK5430730 × 68 × 47.2 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | NSK |
| Designation | 54307 | 54307 | 54307 |
| Product family | Thrust ball bearings | — | Axial deep groove ball bearing |
| Detailed type | Double direction thrust ball bearing with sphered housing washers | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 30 mm | 30 mm | 30 mm |
| Outside diameterD | 68 mm | 68 mm | 68 mm |
| WidthB | — | 47.2 mm | 47.2 mm |
| HeightH | 47.2 mm | — | — |
| Basic dynamic load ratingC | 49.4 kN | — | — |
| Basic static load ratingC0 | 96.5 kN | — | — |
| Fatigue load limitPu | 3.55 kN | — | — |
| Reference speednref | 2400 r/min | 7600 r/min | — |
| Limiting speednG | 3400 r/min | 3200 r/min | — |
| Mass≈m | 0.669 kg | 0.665 kg | 0.744 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Cage | Sheet metal | JP — Steel sheet metal | — |
| Bearing material | Bearing steel | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Additional information | |||
| Seat washer | U 307 | U307 | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA1 | — | — | 21 mm |
| Spherical seat radiusR | — | — | 56 mm |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd2 | — | — | 30 mm |
| Overall outside diameterD | — | — | 68 mm |
| Complete assembled heightT5 | — | — | 47.2 mm |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | — | 56000 N |
| Basic static axial load ratingC0a | — | — | 105000 N |
| Calculation factors | |||
| Minimum load factorA | 0.05 | 0.05 | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | — | 1 mm |
| Minimum shaft-side chamferr1 min. | — | — | 0.3 mm |
| Component dimensions | |||
| Central shaft washer outside diameterd3 | — | — | 68 mm |
| Housing washer bore diameterD1 | — | — | 37 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | — | 35 mm |
| Central shaft washer thicknessB | — | — | 10 mm |
| Partial axial height in the assembly drawingT6 | — | — | 28.6 mm |
| Construction | |||
| Axial load directions | — | — | Both directions |
| Seat construction | — | — | Aligning seat |
| Radial-load support | — | — | Not suitable for radial load; separate radial support required |
| Dimensions | |||
| Radius of aligning surface | 56.0 mm | — | — |
| Inner diameter housing washerD1 | — | 37 mm | — |
| Inner diameter housing washerD1 | — | 1.457 in | — |
| Height shaft washerB | 10 mm | 10 mm | — |
| Height shaft washerB | — | 0.394 in | — |
| Minimum chamfer dimensionrmin | — | 1 mm | — |
| Minimum chamfer dimensionrmin | — | 0.039 in | — |
| Minimum chamfer dimensionr1 min | — | 0.3 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.012 in | — |
| Radius spherical housing washerR | — | 56 mm | — |
| Radius spherical housing washerR | — | 2.205 in | — |
| Distance of the center pointA | — | 21 mm | — |
| Distance of the center pointA | — | 0.827 in | — |
| Height with seat washerT3 | — | 52 mm | — |
| Height with seat washerT3 | — | 2.047 in | — |
| Bore diameter seat washerD2 | — | 52 mm | — |
| Bore diameter seat washerD2 | — | 2.047 in | — |
| Outside diameter seat washerD3 | — | 72 mm | — |
| Outside diameter seat washerD3 | — | 2.835 in | — |
| Height seat washerC | — | 7.5 mm | — |
| Height seat washerC | — | 0.295 in | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | 35 mm | — | — |
| Abutment diameter housingD a | max. 52 mm | — | — |
| Fillet radius housingr a | max. 1 mm | — | — |
| Fillet radius shaftr b | max. 0.3 mm | — | — |
| Engineering — Dimensions | |||
| Height bearing including seat washerH 1 | 52 mm | — | — |
| Inner diameter housing washerD 1 | ≈ 37 mm | — | — |
| Inner diameter sphered seat washerD 2 | 52 mm | — | — |
| Outside diameter sphered housing washerD 3 | 72 mm | — | — |
| Height sphered housing washerC | 7.5 mm | — | — |
| Radius sphered housing washerR | 56 mm | — | — |
| Centre height housing washer spheres | 21 mm | — | — |
| Chamfer dimension housing washerr 1,2 | min. 1 mm | — | — |
| Chamfer dimension shaft washerr 3,4 | min. 0.3 mm | — | — |
| Logistics | |||
| Product net weight | 0.669 kg | — | — |
| eClass code | 23-05-10-01 | — | — |
| UNSPSC code | 31171507 | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | — | 2400 r/min |
| Limiting speed — oil | — | — | 3600 r/min |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | — | 30 mm | — |
| Inner diameter shaft washerd | — | 1.181 in | — |
| Outer diameter housing washerD | — | 68 mm | — |
| Outer diameter housing washerD | — | 2.677 in | — |
| Basic dynamic load rating, axialCa | — | 55,200 N | — |
| Basic dynamic load rating, axialCa | — | 12,410.072 lbf | — |
| Basic static load rating, axialC0a | — | 105,000 N | — |
| Basic static load rating, axialC0a | — | 23,606.115 lbf | — |
| Fatigue load limit, axialCua | — | 4,773 N | — |
| Fatigue load limit, axialCua | — | 1,073.067 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 395034 | — |
| Base Type | — | 54307 | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0190752940000 | — |
| Base product | — | 2305100102 | — |
| Bearing X designation | — | 54307 | — |
| Mounting Manager ID | — | 54307 | — |
| Grease application ID | — | 54307 | — |
| Mass reference | |||
| Approximate assembly mass | — | — | 0.744 kg |
| Mounting dimensions | |||
| Maximum housing abutment diameterDa max. | — | — | 52 mm |
| Maximum housing-side fillet radiusra max. | — | — | 1 mm |
| Maximum shaft-side fillet radiusrb max. | — | — | 0.3 mm |
| Maximum diameter shaft shoulderda max | — | 35 mm | — |
| Maximum diameter shaft shoulderda max | — | 1.378 in | — |
| Maximum diameter of housing shoulderDa max | — | 52 mm | — |
| Maximum diameter of housing shoulderDa max | — | 2.047 in | — |
| Maximum filled radiusra max | — | 1 mm | — |
| Maximum filled radiusra max | — | 0.039 in | — |
| Maximum filled radiusra1 max | — | 0.3 mm | — |
| Maximum filled radiusra1 max | — | 0.012 in | — |
| Product characteristics | |||
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Product identity | |||
| Official product category | Thrust ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/thrust-ball-bearings | — | — |
| Structure group ID | BE1_001_002 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Axial deep groove ball bearing 543, double direction, with spherical housing washer, steel sheet metal cage | — |
| Short Description | — | Axial deep groove ball bearing | — |
| Properties | |||
| Axial load capability | Double-direction | — | — |
| Number of rows | 2 | — | — |
| Housing washer type | Sphered | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Indicative carbon footprint for new product | 2.5 kg CO 2 e | — | — |
| Technical Data | |||
| Inner Diameter Shaft Washer (D) | — | 30 mm | — |
| Outside Diameter (D) | — | 68 mm | — |
| Height (T2) | — | 47.2 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | — | 55,200 N | — |
| Basic Static Load Rating, Axial (C0A) | — | 105,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 3,200 1/min | — |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Reference Speed (Nϑr) | — | 7,600 1/min | — |
| Bore Diameter Seat Washer (D2) | — | 52 mm | — |
| Height Seat Washer (C) | — | 7.5 mm | — |
| Height Shaft Washer (B) | — | 10 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 35 mm | — |
| Minimum Load Factor (A) | — | 0.05 | — |
| Outside Diameter Seat Washer (D3) | — | 72 mm | — |
| Distance Of The Center Point (A) | — | 21 mm | — |
| Height With Seat Washer (T3) | — | 52 mm | — |
| Bore Diameter Housing Washer (D1) | — | 37 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 52 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 1 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 1 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 0.3 mm | — |
| Radius Spherical Housing Washer (R) | — | 56 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 0.3 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 4,773 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.