Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 54238X. This table explores the base group 54238; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“54238” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG54238-MP160 × 270 × 116.4 mm | NSK54238X160 × 270 × 116.4 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | 54238-MP | 54238X |
| Product family | — | Axial deep groove ball bearing |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 54238 | — |
| Bore diameterd | 160 mm | 160 mm |
| Outside diameterD | 270 mm | 270 mm |
| WidthB | 116.4 mm | 116.4 mm |
| Reference speednref | 1990 r/min | — |
| Limiting speednG | 1540 r/min | — |
| Mass≈m | 21.295 kg | 22.2 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | MP — Solid brass cage, rolling element guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Additional information | ||
| Seat washer | U238 | — |
| Aligning-seat geometry | ||
| Aligning-seat geometric referenceA1 | — | 93.5 mm |
| Spherical seat radiusR | — | 200 mm |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd2 | — | 160 mm |
| Overall outside diameterD | — | 270 mm |
| Complete assembled heightT5 | — | 116.4 mm |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 320000 N |
| Basic static axial load ratingC0a | — | 1110000 N |
| Calculation factors | ||
| Minimum load factorA | 7.2 | — |
| Capabilities & suitability | ||
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | — | 2 mm |
| Minimum shaft-side chamferr1 min. | — | 2 mm |
| Component dimensions | ||
| Central shaft washer outside diameterd3 | — | 269 mm |
| Housing washer bore diameterD1 | — | 194 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | 190 mm |
| Central shaft washer thicknessB | — | 24 mm |
| Partial axial height in the assembly drawingT6 | — | 70.2 mm |
| Construction | ||
| Axial load directions | — | Both directions |
| Seat construction | — | Aligning seat |
| Radial-load support | — | Not suitable for radial load; separate radial support required |
| Dimensions | ||
| Inner diameter housing washerD1 | 194.7 mm | — |
| Inner diameter housing washerD1 | 7.665 in | — |
| Height shaft washerB | 24 mm | — |
| Height shaft washerB | 0.945 in | — |
| Minimum chamfer dimensionrmin | 2 mm | — |
| Minimum chamfer dimensionrmin | 0.079 in | — |
| Minimum chamfer dimensionr1 min | 2 mm | — |
| Minimum chamfer dimensionr1 min | 0.079 in | — |
| Radius spherical housing washerR | 200 mm | — |
| Radius spherical housing washerR | 7.874 in | — |
| Distance of the center pointA | 93.5 mm | — |
| Distance of the center pointA | 3.681 in | — |
| Height with seat washerT3 | 131 mm | — |
| Height with seat washerT3 | 5.157 in | — |
| Bore diameter seat washerD2 | 230 mm | — |
| Bore diameter seat washerD2 | 9.055 in | — |
| Outside diameter seat washerD3 | 280 mm | — |
| Outside diameter seat washerD3 | 11.024 in | — |
| Height seat washerC | 23 mm | — |
| Height seat washerC | 0.906 in | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 710 r/min |
| Limiting speed — oil | — | 1100 r/min |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | 160 mm | — |
| Inner diameter shaft washerd | 6.299 in | — |
| Outer diameter housing washerD | 270 mm | — |
| Outer diameter housing washerD | 10.63 in | — |
| Basic dynamic load rating, axialCa | 335,000 N | — |
| Basic dynamic load rating, axialCa | 75,314.748 lbf | — |
| Basic static load rating, axialC0a | 1,170,000 N | — |
| Basic static load rating, axialC0a | 263,039.568 lbf | — |
| Fatigue load limit, axialCua | 35,500 N | — |
| Fatigue load limit, axialCua | 7,981.115 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 395026 | — |
| Base Type | 54238 | — |
| Old Designation | ["54238MP"] | — |
| Gpsd Group | S03 | — |
| Product Line Id | 14 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0384750490000 | — |
| Base product | 2305100102 | — |
| Bearing X designation | 54238-MP | — |
| Mounting Manager ID | 54238-MP | — |
| Grease application ID | 54238-MP | — |
| Mass reference | ||
| Approximate assembly mass | — | 22.2 kg |
| Mounting dimensions | ||
| Maximum housing abutment diameterDa max. | — | 230 mm |
| Maximum housing-side fillet radiusra max. | — | 2 mm |
| Maximum shaft-side fillet radiusrb max. | — | 2 mm |
| Maximum diameter shaft shoulderda max | 190 mm | — |
| Maximum diameter shaft shoulderda max | 7.48 in | — |
| Maximum diameter of housing shoulderDa max | 230 mm | — |
| Maximum diameter of housing shoulderDa max | 9.055 in | — |
| Maximum filled radiusra max | 2 mm | — |
| Maximum filled radiusra max | 0.079 in | — |
| Maximum filled radiusra1 max | 2 mm | — |
| Maximum filled radiusra1 max | 0.079 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS1 | Rings dimensional stabilized up to 200° | — |
| Product Identity | ||
| Construction | Axial deep groove ball bearing 542..-MP, double direction, with spherical housing washer, solid brass cage | — |
| Short Description | Axial deep groove ball bearing | — |
| Technical Data | ||
| Inner Diameter Shaft Washer (D) | 160 mm | — |
| Outside Diameter (D) | 270 mm | — |
| Height (T2) | 116.4 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | 335,000 N | — |
| Basic Static Load Rating, Axial (C0A) | 1,170,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed (Ng) | 1,540 1/min | — |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Reference Speed (Nϑr) | 1,990 1/min | — |
| Bore Diameter Seat Washer (D2) | 230 mm | — |
| Height Seat Washer (C) | 23 mm | — |
| Height Shaft Washer (B) | 24 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 190 mm | — |
| Minimum Load Factor (A) | 7.2 | — |
| Outside Diameter Seat Washer (D3) | 280 mm | — |
| Distance Of The Center Point (A) | 93.5 mm | — |
| Height With Seat Washer (T3) | 131 mm | — |
| Bore Diameter Housing Washer (D1) | 194.7 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 230 mm | — |
| Minimum Chamfer Dimension (Rmin) | 2 mm | — |
| Maximum Fillet Radius (Ra Max) | 2 mm | — |
| Maximum Recess Radius (Ra1 Max) | 2 mm | — |
| Radius Spherical Housing Washer (R) | 200 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 2 mm | — |
| Fatigue Load Limit, Axial (Cua) | 35,500 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.