Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 54232-MP. This table explores the base group 54232; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“54232” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG54232-MP140 × 225 × 97.4 mm | NSK54232X140 × 225 × 97.4 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | 54232-MP | 54232X |
| Product family | — | Axial deep groove ball bearing |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 54232 | — |
| Bore diameterd | 140 mm | 140 mm |
| Outside diameterD | 225 mm | 225 mm |
| WidthB | 97.4 mm | 97.4 mm |
| Reference speednref | 2400 r/min | — |
| Limiting speednG | 1900 r/min | — |
| Mass≈m | 11.19 kg | 12.7 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | MP — Solid brass cage, rolling element guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Additional information | ||
| Seat washer | U232 | — |
| Aligning-seat geometry | ||
| Aligning-seat geometric referenceA1 | — | 70 mm |
| Spherical seat radiusR | — | 160 mm |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd2 | — | 140 mm |
| Overall outside diameterD | — | 225 mm |
| Complete assembled heightT5 | — | 97.4 mm |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 249000 N |
| Basic static axial load ratingC0a | — | 805000 N |
| Calculation factors | ||
| Minimum load factorA | 3.2 | — |
| Capabilities & suitability | ||
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | — | 1.5 mm |
| Minimum shaft-side chamferr1 min. | — | 1.1 mm |
| Component dimensions | ||
| Central shaft washer outside diameterd3 | — | 224.5 mm |
| Housing washer bore diameterD1 | — | 163 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | 160 mm |
| Central shaft washer thicknessB | — | 20 mm |
| Partial axial height in the assembly drawingT6 | — | 58.7 mm |
| Construction | ||
| Axial load directions | — | Both directions |
| Seat construction | — | Aligning seat |
| Radial-load support | — | Not suitable for radial load; separate radial support required |
| Dimensions | ||
| Inner diameter housing washerD1 | 163 mm | — |
| Inner diameter housing washerD1 | 6.417 in | — |
| Height shaft washerB | 20 mm | — |
| Height shaft washerB | 0.787 in | — |
| Minimum chamfer dimensionrmin | 1.5 mm | — |
| Minimum chamfer dimensionrmin | 0.059 in | — |
| Minimum chamfer dimensionr1 min | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | 0.043 in | — |
| Radius spherical housing washerR | 160 mm | — |
| Radius spherical housing washerR | 6.299 in | — |
| Distance of the center pointA | 70 mm | — |
| Distance of the center pointA | 2.756 in | — |
| Height with seat washerT3 | 110 mm | — |
| Height with seat washerT3 | 4.331 in | — |
| Bore diameter seat washerD2 | 190 mm | — |
| Bore diameter seat washerD2 | 7.48 in | — |
| Outside diameter seat washerD3 | 235 mm | — |
| Outside diameter seat washerD3 | 9.252 in | — |
| Height seat washerC | 21 mm | — |
| Height seat washerC | 0.827 in | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 850 r/min |
| Limiting speed — oil | — | 1300 r/min |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | 140 mm | — |
| Inner diameter shaft washerd | 5.512 in | — |
| Outer diameter housing washerD | 225 mm | — |
| Outer diameter housing washerD | 8.858 in | — |
| Basic dynamic load rating, axialCa | 240,000 N | — |
| Basic dynamic load rating, axialCa | 53,956.835 lbf | — |
| Basic static load rating, axialC0a | 770,000 N | — |
| Basic static load rating, axialC0a | 173,111.511 lbf | — |
| Fatigue load limit, axialCua | 25,500 N | — |
| Fatigue load limit, axialCua | 5,732.914 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 993327 | — |
| Base Type | 54232 | — |
| Gpsd Group | S03 | — |
| Product Line Id | 14 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0392577460000 | — |
| Base product | 2305100102 | — |
| Bearing X designation | 54232-MP | — |
| Mounting Manager ID | 54232-MP | — |
| Grease application ID | 54232-MP | — |
| Mass reference | ||
| Approximate assembly mass | — | 12.7 kg |
| Mounting dimensions | ||
| Maximum housing abutment diameterDa max. | — | 190 mm |
| Maximum housing-side fillet radiusra max. | — | 1.5 mm |
| Maximum shaft-side fillet radiusrb max. | — | 1 mm |
| Maximum diameter shaft shoulderda max | 160 mm | — |
| Maximum diameter shaft shoulderda max | 6.299 in | — |
| Maximum diameter of housing shoulderDa max | 190 mm | — |
| Maximum diameter of housing shoulderDa max | 7.48 in | — |
| Maximum filled radiusra max | 1.5 mm | — |
| Maximum filled radiusra max | 0.059 in | — |
| Maximum filled radiusra1 max | 1 mm | — |
| Maximum filled radiusra1 max | 0.039 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — |
| Product Identity | ||
| Construction | Axial deep groove ball bearing 542..-MP, double direction, with spherical housing washer, solid brass cage | — |
| Short Description | Axial deep groove ball bearing | — |
| Technical Data | ||
| Inner Diameter Shaft Washer (D) | 140 mm | — |
| Outside Diameter (D) | 225 mm | — |
| Height (T2) | 97.4 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | 240,000 N | — |
| Basic Static Load Rating, Axial (C0A) | 770,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed (Ng) | 1,900 1/min | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Reference Speed (Nϑr) | 2,400 1/min | — |
| Bore Diameter Seat Washer (D2) | 190 mm | — |
| Height Seat Washer (C) | 21 mm | — |
| Height Shaft Washer (B) | 20 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 160 mm | — |
| Minimum Load Factor (A) | 3.2 | — |
| Outside Diameter Seat Washer (D3) | 235 mm | — |
| Distance Of The Center Point (A) | 70 mm | — |
| Height With Seat Washer (T3) | 110 mm | — |
| Bore Diameter Housing Washer (D1) | 163 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 190 mm | — |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | — |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | — |
| Maximum Recess Radius (Ra1 Max) | 1 mm | — |
| Radius Spherical Housing Washer (R) | 160 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 1.1 mm | — |
| Fatigue Load Limit, Axial (Cua) | 25,500 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.