Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“54224” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG54224100 × 170 × 71.6 mm | NSK54224100 × 170 × 71.6 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | 54224 | 54224 |
| Product family | — | Axial deep groove ball bearing |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 100 mm | 100 mm |
| Outside diameterD | 170 mm | 170 mm |
| WidthB | 71.6 mm | 71.6 mm |
| Reference speednref | 3100 r/min | — |
| Limiting speednG | 2550 r/min | — |
| Mass≈m | 4.658 kg | 5.4 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | JP — Steel sheet metal | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Additional information | ||
| Seat washer | U224 | — |
| Aligning-seat geometry | ||
| Aligning-seat geometric referenceA1 | — | 58.5 mm |
| Spherical seat radiusR | — | 125 mm |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd2 | — | 100 mm |
| Overall outside diameterD | — | 170 mm |
| Complete assembled heightT5 | — | 71.6 mm |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 141000 N |
| Basic static axial load ratingC0a | — | 430000 N |
| Calculation factors | ||
| Minimum load factorA | 0.94 | — |
| Capabilities & suitability | ||
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | — | 1.1 mm |
| Minimum shaft-side chamferr1 min. | — | 1.1 mm |
| Component dimensions | ||
| Central shaft washer outside diameterd3 | — | 170 mm |
| Housing washer bore diameterD1 | — | 123 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | 120 mm |
| Central shaft washer thicknessB | — | 15 mm |
| Partial axial height in the assembly drawingT6 | — | 43.3 mm |
| Construction | ||
| Axial load directions | — | Both directions |
| Seat construction | — | Aligning seat |
| Radial-load support | — | Not suitable for radial load; separate radial support required |
| Dimensions | ||
| Inner diameter housing washerD1 | 123 mm | — |
| Inner diameter housing washerD1 | 4.843 in | — |
| Height shaft washerB | 15 mm | — |
| Height shaft washerB | 0.591 in | — |
| Minimum chamfer dimensionrmin | 1.1 mm | — |
| Minimum chamfer dimensionrmin | 0.043 in | — |
| Minimum chamfer dimensionr1 min | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | 0.043 in | — |
| Radius spherical housing washerR | 125 mm | — |
| Radius spherical housing washerR | 4.921 in | — |
| Distance of the center pointA | 58.5 mm | — |
| Distance of the center pointA | 2.303 in | — |
| Height with seat washerT3 | 82 mm | — |
| Height with seat washerT3 | 3.228 in | — |
| Bore diameter seat washerD2 | 145 mm | — |
| Bore diameter seat washerD2 | 5.709 in | — |
| Outside diameter seat washerD3 | 175 mm | — |
| Outside diameter seat washerD3 | 6.89 in | — |
| Height seat washerC | 15 mm | — |
| Height seat washerC | 0.591 in | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 1200 r/min |
| Limiting speed — oil | — | 1800 r/min |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | 100 mm | — |
| Inner diameter shaft washerd | 3.937 in | — |
| Outer diameter housing washerD | 170 mm | — |
| Outer diameter housing washerD | 6.693 in | — |
| Basic dynamic load rating, axialCa | 128,000 N | — |
| Basic dynamic load rating, axialCa | 28,776.978 lbf | — |
| Basic static load rating, axialC0a | 385,000 N | — |
| Basic static load rating, axialC0a | 86,555.755 lbf | — |
| Fatigue load limit, axialCua | 14,600 N | — |
| Fatigue load limit, axialCua | 3,282.374 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 992404 | — |
| Base Type | 54224 | — |
| Gpsd Group | S03 | — |
| Product Line Id | 14 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0392577110000 | — |
| Base product | 2305100102 | — |
| Bearing X designation | 54224 | — |
| Mounting Manager ID | 54224 | — |
| Grease application ID | 54224 | — |
| Mass reference | ||
| Approximate assembly mass | — | 5.4 kg |
| Mounting dimensions | ||
| Maximum housing abutment diameterDa max. | — | 145 mm |
| Maximum housing-side fillet radiusra max. | — | 1 mm |
| Maximum shaft-side fillet radiusrb max. | — | 1 mm |
| Maximum diameter shaft shoulderda max | 120 mm | — |
| Maximum diameter shaft shoulderda max | 4.724 in | — |
| Maximum diameter of housing shoulderDa max | 145 mm | — |
| Maximum diameter of housing shoulderDa max | 5.709 in | — |
| Maximum filled radiusra max | 1 mm | — |
| Maximum filled radiusra max | 0.039 in | — |
| Maximum filled radiusra1 max | 1 mm | — |
| Maximum filled radiusra1 max | 0.039 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — |
| Product Identity | ||
| Construction | Axial deep groove ball bearing 542, double direction, with spherical housing washer, steel sheet metal cage | — |
| Short Description | Axial deep groove ball bearing | — |
| Technical Data | ||
| Inner Diameter Shaft Washer (D) | 100 mm | — |
| Outside Diameter (D) | 170 mm | — |
| Height (T2) | 71.6 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | 128,000 N | — |
| Basic Static Load Rating, Axial (C0A) | 385,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed (Ng) | 2,550 1/min | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Reference Speed (Nϑr) | 3,100 1/min | — |
| Bore Diameter Seat Washer (D2) | 145 mm | — |
| Height Seat Washer (C) | 15 mm | — |
| Height Shaft Washer (B) | 15 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 120 mm | — |
| Minimum Load Factor (A) | 0.94 | — |
| Outside Diameter Seat Washer (D3) | 175 mm | — |
| Distance Of The Center Point (A) | 58.5 mm | — |
| Height With Seat Washer (T3) | 82 mm | — |
| Bore Diameter Housing Washer (D1) | 123 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 145 mm | — |
| Minimum Chamfer Dimension (Rmin) | 1.1 mm | — |
| Maximum Fillet Radius (Ra Max) | 1 mm | — |
| Maximum Recess Radius (Ra1 Max) | 1 mm | — |
| Radius Spherical Housing Washer (R) | 125 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 1.1 mm | — |
| Fatigue Load Limit, Axial (Cua) | 14,600 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.