Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“53322” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG53322-MP110 × 190 × 67.2 mm | NSK53322X110 × 190 × 67.2 mm | KOYO53322110 × 190 × 67.2 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 53322-MP | 53322X | 53322 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 53322 | — | — |
| Bore diameterd | 110 mm | 110 mm | 110 mm |
| Outside diameterD | 190 mm | 190 mm | 190 mm |
| WidthB | 67.2 mm | 67.2 mm | 67.2 mm |
| Fatigue load limitPu | — | — | 25.9 kN |
| Reference speednref | 3400 r/min | — | — |
| Limiting speednG | 1790 r/min | — | 810 r/min |
| Mass≈m | 7.701 kg | 7.55 kg | 7.63 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | MP — Solid brass cage, rolling element guided | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| Seat washer | U322 | — | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA | — | 51 mm | — |
| Spherical seat radiusR | — | 140 mm | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 110 mm | — |
| Overall outside diameterD | — | 190 mm | — |
| Complete assembled heightT3 | — | 67.2 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 282000 N | — |
| Basic static axial load ratingC0a | — | 755000 N | — |
| Calculation factors | |||
| Minimum load factorA | 3 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Staticangularerrorandmisalignment | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 2 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 187 mm | — |
| Housing washer bore diameterD1 | — | 113 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Aligning seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 2 mm | — | — |
| Minimum chamfer dimensionrmin | 0.079 in | — | — |
| Inner diameter housing washerD1 | 113 mm | — | — |
| Inner diameter housing washerD1 | 4.449 in | — | — |
| Outer diameter shaft washerd1 | 187 mm | — | — |
| Outer diameter shaft washerd1 | 7.362 in | — | — |
| Radius spherical housing washerR | 140 mm | — | — |
| Radius spherical housing washerR | 5.512 in | — | — |
| Distance of the center pointA | 51 mm | — | — |
| Distance of the center pointA | 2.008 in | — | — |
| Height with seat washerT1 | 72 mm | — | — |
| Height with seat washerT1 | 2.835 in | — | — |
| Bore diameter seat washerD2 | 150 mm | — | — |
| Bore diameter seat washerD2 | 5.906 in | — | — |
| Outside diameter seat washerD3 | 195 mm | — | — |
| Outside diameter seat washerD3 | 7.677 in | — | — |
| Height seat washerC | 20.5 mm | — | — |
| Height seat washerC | 0.807 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 900 r/min | — |
| Limiting speed — oil | — | 1300 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 110 mm | — | — |
| Inner diameter shaft washerd | 4.331 in | — | — |
| Outer diameter housing washerD | 190 mm | — | — |
| Outer diameter housing washerD | 7.48 in | — | — |
| Basic dynamic load rating, axialCa | 280,000 N | — | — |
| Basic dynamic load rating, axialCa | 62,949.64 lbf | — | — |
| Basic static load rating, axialC0a | 740,000 N | — | — |
| Basic static load rating, axialC0a | 166,366.906 lbf | — | — |
| Fatigue load limit, axialCua | 28,000 N | — | — |
| Fatigue load limit, axialCua | 6,294.964 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394788 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 53322 | — | — |
| Old Designation | ["53322MP"] | — | — |
| Gpsd Group | S03 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0167159690000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 53322-MP | — | — |
| Mounting Manager ID | 53322-MP | — | — |
| Grease application ID | 53322-MP | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 7.55 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 158 mm | — |
| Maximum housing abutment diameterDa max. | — | 142 mm | — |
| Maximum housing-side fillet radiusra max. | — | 2 mm | — |
| Minimum diameter shaft shoulderda min | 158 mm | — | — |
| Minimum diameter shaft shoulderda min | 6.22 in | — | — |
| Maximum diameter of housing shoulderDa max | 150 mm | — | — |
| Maximum diameter of housing shoulderDa max | 5.906 in | — | — |
| Maximum filled radiusra max | 2 mm | — | — |
| Maximum filled radiusra max | 0.079 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 533..-MP, single direction, with spherical housing washer, solid brass cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 190 mm |
| T | — | — | 67.2 mm |
| R(Min.) | — | — | 2 mm |
| Basic Load Ratings Ca | — | — | 334 kN |
| Bore Diameter (D) | 110 mm | — | — |
| Basic Load Ratings C0A | — | — | 704 kN |
| Outside Diameter (D) | 190 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 25.9 kN |
| Width (B) | 67.2 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 810 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | 280,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 1250 min-1 |
| Basic Static Load Rating, Axial (C0A) | 740,000 N | — | — |
| D1(Max.) | — | — | 187 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Min.) | — | — | 113 mm |
| Limiting Speed (Ng) | 1,790 1/min | — | — |
| D2 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| D3 | — | — | - mm |
| Reference Speed (Nϑr) | 3,400 1/min | — | — |
| A | — | — | 51 mm |
| Bore Diameter Seat Washer (D2) | 150 mm | — | — |
| R | — | — | 140 mm |
| Height Seat Washer (C) | 20.5 mm | — | — |
| C | — | — | - mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 158 mm | — | — |
| Da(Min.) | — | — | 158 mm |
| Minimum Load Factor (A) | 3 | — | — |
| Da(Max.) | — | — | 142 mm |
| Outside Diameter Seat Washer (D3) | 195 mm | — | — |
| Ra(Max.) | — | — | 2 mm |
| Rip Diameter Shaft Washer (D1) | 187 mm | — | — |
| Mass(Refer.) | — | — | 7.63 kg |
| Distance Of The Center Point (A) | 51 mm | — | — |
| Bore Diameter Housing Washer (D1) | 113 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 150 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 2 mm | — | — |
| Height With Seat Washer (T1) | 72 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 2 mm | — | — |
| Radius Spherical Housing Washer (R) | 140 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 28,000 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.