Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“53240” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | NSK53240X200 × 280 × 65.3 mm | KOYO53240200 × 280 × 65.3 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | NSK | KOYO |
| Designation | 53240X | 53240 |
| Product family | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 200 mm | 200 mm |
| Outside diameterD | 280 mm | 280 mm |
| WidthB | 65.3 mm | 65.3 mm |
| Fatigue load limitPu | — | 32.2 kN |
| Limiting speednG | — | 620 r/min |
| Mass≈m | 13.4 kg | 11.6 kg |
| Aligning-seat geometry | ||
| Aligning-seat geometric referenceA | 125 mm | — |
| Spherical seat radiusR | 225 mm | — |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd | 200 mm | — |
| Overall outside diameterD | 280 mm | — |
| Complete assembled heightT3 | 65.3 mm | — |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | 315000 N | — |
| Basic static axial load ratingC0a | 1110000 N | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | 2 mm | — |
| Classification | ||
| Official Category Path | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | ||
| Shaft washer outside diameterd1 | 277 mm | — |
| Housing washer bore diameterD1 | 204 mm | — |
| Construction | ||
| Axial load directions | One direction | — |
| Seat construction | Aligning seat | — |
| Radial-load support | Not suitable for radial load; separate radial support required | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | 710 r/min | — |
| Limiting speed — oil | 1100 r/min | — |
| Manufacturer Identity | ||
| Official Class Key | — | 070-010-000 |
| Mass reference | ||
| Approximate assembly mass | 13.4 kg | — |
| Mounting dimensions | ||
| Minimum shaft abutment diameterda min. | 248 mm | — |
| Maximum housing abutment diameterDa max. | 232 mm | — |
| Maximum housing-side fillet radiusra max. | 2 mm | — |
| Technical Data | ||
| d | — | 280 mm |
| T | — | 65.3 mm |
| R(Min.) | — | 2 mm |
| Basic Load Ratings Ca | — | 392 kN |
| Basic Load Ratings C0A | — | 1110 kN |
| Fatigue Load Limit : Cu | — | 32.2 kN |
| Limiting Speeds(Grease Lub.) | — | 620 min-1 |
| Limiting Speeds(Oil Lub.) | — | 950 min-1 |
| D1(Max.) | — | 277 mm |
| D1(Min.) | — | 204 mm |
| D2 | — | - mm |
| D3 | — | - mm |
| A | — | 125 mm |
| R | — | 225 mm |
| C | — | - mm |
| Da(Min.) | — | 248 mm |
| Da(Max.) | — | 232 mm |
| Ra(Max.) | — | 2 mm |
| Mass(Refer.) | — | 11.6 kg |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.