Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 53236-MP. This table explores the base group 53236; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“53236” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG53236-MP180 × 250 × 58.2 mm | NSK53236X180 × 250 × 58.2 mm | KOYO53236180 × 250 × 58.2 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 53236-MP | 53236X | 53236 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 53236 | — | — |
| Bore diameterd | 180 mm | 180 mm | 180 mm |
| Outside diameterD | 250 mm | 250 mm | 250 mm |
| WidthB | 58.2 mm | 58.2 mm | 58.2 mm |
| Fatigue load limitPu | — | — | 26.9 kN |
| Reference speednref | 2080 r/min | — | — |
| Limiting speednG | 1670 r/min | — | 710 r/min |
| Mass≈m | 8.19 kg | 8.57 kg | 8.08 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | MP — Solid brass cage, rolling element guided | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 200 °C | — | — |
| Additional information | |||
| Seat washer | U236 | — | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA | — | 112 mm | — |
| Spherical seat radiusR | — | 200 mm | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 180 mm | — |
| Overall outside diameterD | — | 250 mm | — |
| Complete assembled heightT3 | — | 58.2 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 284000 N | — |
| Basic static axial load ratingC0a | — | 955000 N | — |
| Calculation factors | |||
| Minimum load factorA | 5.4 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Staticangularerrorandmisalignment | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 1.5 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 247 mm | — |
| Housing washer bore diameterD1 | — | 183 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Aligning seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 1.5 mm | — | — |
| Minimum chamfer dimensionrmin | 0.059 in | — | — |
| Inner diameter housing washerD1 | 183 mm | — | — |
| Inner diameter housing washerD1 | 7.205 in | — | — |
| Outer diameter shaft washerd1 | 245 mm | — | — |
| Outer diameter shaft washerd1 | 9.646 in | — | — |
| Radius spherical housing washerR | 200 mm | — | — |
| Radius spherical housing washerR | 7.874 in | — | — |
| Distance of the center pointA | 112 mm | — | — |
| Distance of the center pointA | 4.409 in | — | — |
| Height with seat washerT1 | 66 mm | — | — |
| Height with seat washerT1 | 2.598 in | — | — |
| Bore diameter seat washerD2 | 210 mm | — | — |
| Bore diameter seat washerD2 | 8.268 in | — | — |
| Outside diameter seat washerD3 | 260 mm | — | — |
| Outside diameter seat washerD3 | 10.236 in | — | — |
| Height seat washerC | 21.5 mm | — | — |
| Height seat washerC | 0.846 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 800 r/min | — |
| Limiting speed — oil | — | 1200 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 180 mm | — | — |
| Inner diameter shaft washerd | 7.087 in | — | — |
| Outer diameter housing washerD | 250 mm | — | — |
| Outer diameter housing washerD | 9.843 in | — | — |
| Basic dynamic load rating, axialCa | 305,000 N | — | — |
| Basic dynamic load rating, axialCa | 68,570.144 lbf | — | — |
| Basic static load rating, axialC0a | 1,030,000 N | — | — |
| Basic static load rating, axialC0a | 231,564.748 lbf | — | — |
| Fatigue load limit, axialCua | 32,500 N | — | — |
| Fatigue load limit, axialCua | 7,306.655 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394754 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 53236 | — | — |
| Old Designation | ["53236MP"] | — | — |
| Gpsd Group | S03 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0190704700000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 53236-MP | — | — |
| Mounting Manager ID | 53236-MP | — | — |
| Grease application ID | 53236-MP | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 8.57 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 222 mm | — |
| Maximum housing abutment diameterDa max. | — | 208 mm | — |
| Maximum housing-side fillet radiusra max. | — | 1.5 mm | — |
| Minimum diameter shaft shoulderda min | 222 mm | — | — |
| Minimum diameter shaft shoulderda min | 8.74 in | — | — |
| Maximum diameter of housing shoulderDa max | 210 mm | — | — |
| Maximum diameter of housing shoulderDa max | 8.268 in | — | — |
| Maximum filled radiusra max | 1.5 mm | — | — |
| Maximum filled radiusra max | 0.059 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS1 | Rings dimensional stabilized up to 200° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 532..-MP, single direction, with spherical housing washer, solid brass cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 250 mm |
| T | — | — | 58.2 mm |
| R(Min.) | — | — | 1.5 mm |
| Basic Load Ratings Ca | — | — | 332 kN |
| Bore Diameter (D) | 180 mm | — | — |
| Basic Load Ratings C0A | — | — | 874 kN |
| Outside Diameter (D) | 250 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 26.9 kN |
| Width (B) | 58.2 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 710 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | 305,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 1100 min-1 |
| Basic Static Load Rating, Axial (C0A) | 1,030,000 N | — | — |
| D1(Max.) | — | — | 247 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Min.) | — | — | 183 mm |
| Limiting Speed (Ng) | 1,670 1/min | — | — |
| D2 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 200 °C | — | — |
| D3 | — | — | - mm |
| Reference Speed (Nϑr) | 2,080 1/min | — | — |
| A | — | — | 112 mm |
| Bore Diameter Seat Washer (D2) | 210 mm | — | — |
| R | — | — | 200 mm |
| Height Seat Washer (C) | 21.5 mm | — | — |
| C | — | — | - mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 222 mm | — | — |
| Da(Min.) | — | — | 222 mm |
| Minimum Load Factor (A) | 5.4 | — | — |
| Da(Max.) | — | — | 208 mm |
| Outside Diameter Seat Washer (D3) | 260 mm | — | — |
| Ra(Max.) | — | — | 1.5 mm |
| Rip Diameter Shaft Washer (D1) | 245 mm | — | — |
| Mass(Refer.) | — | — | 8.08 kg |
| Distance Of The Center Point (A) | 112 mm | — | — |
| Bore Diameter Housing Washer (D1) | 183 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 210 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | — | — |
| Height With Seat Washer (T1) | 66 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | — | — |
| Radius Spherical Housing Washer (R) | 200 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 32,500 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 200 °C | — | — |
| Operating temperature max.Tmax | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.