Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 53232U. This table explores the base group 53232; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“53232” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG53232-MP160 × 225 × 54.7 mm | NSK53232X160 × 225 × 54.7 mm | KOYO53232160 × 225 × 54.7 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 53232-MP | 53232X | 53232 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 53232 | — | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 225 mm | 225 mm | 225 mm |
| WidthB | 54.7 mm | 54.7 mm | 54.7 mm |
| Fatigue load limitPu | — | — | 23.4 kN |
| Reference speednref | 2350 r/min | — | — |
| Limiting speednG | 1900 r/min | — | 810 r/min |
| Mass≈m | 6.315 kg | 6.78 kg | 6.09 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | MP — Solid brass cage, rolling element guided | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| Seat washer | U232 | — | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA | — | 74 mm | — |
| Spherical seat radiusR | — | 160 mm | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 160 mm | — |
| Overall outside diameterD | — | 225 mm | — |
| Complete assembled heightT3 | — | 54.7 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 249000 N | — |
| Basic static axial load ratingC0a | — | 805000 N | — |
| Calculation factors | |||
| Minimum load factorA | 3.2 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Staticangularerrorandmisalignment | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 1.5 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 222 mm | — |
| Housing washer bore diameterD1 | — | 163 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Aligning seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 1.5 mm | — | — |
| Minimum chamfer dimensionrmin | 0.059 in | — | — |
| Inner diameter housing washerD1 | 163 mm | — | — |
| Inner diameter housing washerD1 | 6.417 in | — | — |
| Outer diameter shaft washerd1 | 222 mm | — | — |
| Outer diameter shaft washerd1 | 8.74 in | — | — |
| Radius spherical housing washerR | 160 mm | — | — |
| Radius spherical housing washerR | 6.299 in | — | — |
| Distance of the center pointA | 74 mm | — | — |
| Distance of the center pointA | 2.913 in | — | — |
| Height with seat washerT1 | 61 mm | — | — |
| Height with seat washerT1 | 2.402 in | — | — |
| Bore diameter seat washerD2 | 190 mm | — | — |
| Bore diameter seat washerD2 | 7.48 in | — | — |
| Outside diameter seat washerD3 | 235 mm | — | — |
| Outside diameter seat washerD3 | 9.252 in | — | — |
| Height seat washerC | 21 mm | — | — |
| Height seat washerC | 0.827 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 900 r/min | — |
| Limiting speed — oil | — | 1400 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 160 mm | — | — |
| Inner diameter shaft washerd | 6.299 in | — | — |
| Outer diameter housing washerD | 225 mm | — | — |
| Outer diameter housing washerD | 8.858 in | — | — |
| Basic dynamic load rating, axialCa | 240,000 N | — | — |
| Basic dynamic load rating, axialCa | 53,956.835 lbf | — | — |
| Basic static load rating, axialC0a | 770,000 N | — | — |
| Basic static load rating, axialC0a | 173,111.511 lbf | — | — |
| Fatigue load limit, axialCua | 25,500 N | — | — |
| Fatigue load limit, axialCua | 5,732.914 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394750 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 53232 | — | — |
| Old Designation | ["53232MP"] | — | — |
| Gpsd Group | S03 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0190704540000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 53232-MP | — | — |
| Mounting Manager ID | 53232-MP | — | — |
| Grease application ID | 53232-MP | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 6.78 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 199 mm | — |
| Maximum housing abutment diameterDa max. | — | 186 mm | — |
| Maximum housing-side fillet radiusra max. | — | 1.5 mm | — |
| Minimum diameter shaft shoulderda min | 199 mm | — | — |
| Minimum diameter shaft shoulderda min | 7.835 in | — | — |
| Maximum diameter of housing shoulderDa max | 190 mm | — | — |
| Maximum diameter of housing shoulderDa max | 7.48 in | — | — |
| Maximum filled radiusra max | 1.5 mm | — | — |
| Maximum filled radiusra max | 0.059 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 532..-MP, single direction, with spherical housing washer, solid brass cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 225 mm |
| T | — | — | 54.7 mm |
| R(Min.) | — | — | 1.5 mm |
| Basic Load Ratings Ca | — | — | 279 kN |
| Bore Diameter (D) | 160 mm | — | — |
| Basic Load Ratings C0A | — | — | 718 kN |
| Outside Diameter (D) | 225 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 23.4 kN |
| Width (B) | 54.7 mm | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 810 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | 240,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 1250 min-1 |
| Basic Static Load Rating, Axial (C0A) | 770,000 N | — | — |
| D1(Max.) | — | — | 222 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Min.) | — | — | 163 mm |
| Limiting Speed (Ng) | 1,900 1/min | — | — |
| D2 | — | — | - mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| D3 | — | — | - mm |
| Reference Speed (Nϑr) | 2,350 1/min | — | — |
| A | — | — | 74 mm |
| Bore Diameter Seat Washer (D2) | 190 mm | — | — |
| R | — | — | 160 mm |
| Height Seat Washer (C) | 21 mm | — | — |
| C | — | — | - mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 199 mm | — | — |
| Da(Min.) | — | — | 199 mm |
| Minimum Load Factor (A) | 3.2 | — | — |
| Da(Max.) | — | — | 186 mm |
| Outside Diameter Seat Washer (D3) | 235 mm | — | — |
| Ra(Max.) | — | — | 1.5 mm |
| Rip Diameter Shaft Washer (D1) | 222 mm | — | — |
| Mass(Refer.) | — | — | 6.09 kg |
| Distance Of The Center Point (A) | 74 mm | — | — |
| Bore Diameter Housing Washer (D1) | 163 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 190 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 1.5 mm | — | — |
| Height With Seat Washer (T1) | 61 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | — | — |
| Radius Spherical Housing Washer (R) | 160 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 25,500 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.